I'M BACK! - Making a Captain Vaughn Clone Trooper Helmet

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ •

  • @benhalstead1246
    @benhalstead1246 4 роки тому +696

    After the last episode of clone wars I think we should make Jessie's helmet
    Cant help but feel sad for the clones

  • @WoofWoofWolffe
    @WoofWoofWolffe 4 роки тому +180

    He’s Back!

    • @ronaldyquinain9381
      @ronaldyquinain9381 4 роки тому +1

      holy sh is that wolffe

    • @Goldeagleactual
      @Goldeagleactual 4 роки тому +1

      Yes that is the wolf

    • @billsk9395
      @billsk9395 4 роки тому

      Wooolffe I'm a ultimate fan of you !!! I have shared all of your videos to all my friends !!!!

    • @pilots1015
      @pilots1015 4 роки тому

      Lol you watch him that’s amazing “baby yoda”....

    • @Nomad_-
      @Nomad_- 4 роки тому +1

      Sir yes sir

  • @FormulaCenter1
    @FormulaCenter1 4 роки тому +601

    Suggestions arc trooper Jesse helmet and shoretrooper
    Edit May the fourth be with you

    • @GalacticArmory
      @GalacticArmory  4 роки тому +106

      Jesse is definitely top tier now

    • @nyipnyop
      @nyipnyop 4 роки тому +4

      I'm sure I'm going to put that on a piece of metal stick if I have Jesse's helmet

    • @FormulaCenter1
      @FormulaCenter1 4 роки тому +3

      The last episode was so good

    • @FormulaCenter1
      @FormulaCenter1 4 роки тому +1

      Galactic Armory that helmet is so cool when will your shop be back
      I might get a helmet with my birthday money

    • @emperorpalpagames3314
      @emperorpalpagames3314 4 роки тому +2

      The Senate wishes you a happy birthday.

  • @Sirdonic
    @Sirdonic 4 роки тому +106

    You should do a series based on different paint jobs on clone helmets.

  • @GlanderBomb
    @GlanderBomb 4 роки тому +112

    Can you do Jesse helmet? Also when are you going to restock the shop?

    • @FinnMeals
      @FinnMeals 4 роки тому +3

      yes please restock

  • @Manic_Maul
    @Manic_Maul 4 роки тому +57

    Glad to see he’s back in the saddle ! 2020 isn’t so bad now lol

    • @GalacticArmory
      @GalacticArmory  4 роки тому +6

      Quarantine has given me lots of free time!

  • @Pawe-mx9wc
    @Pawe-mx9wc 4 роки тому +56

    Jesse helmet! I'm a fan of cinematic not animated design so would love to see that version

  • @bradleypataconi4196
    @bradleypataconi4196 4 роки тому +13

    Omg bro! I’m so happy you’re back! I love your videos, they are very helpful and informative

  • @nikverghese
    @nikverghese 4 роки тому +45

    Welcome back. Could you tackle Garr Saxons helmet in S7. It looks soo good

    • @tsivilsඞ
      @tsivilsඞ 4 роки тому +1

      Ikr I want to see that too

    • @LonelyBreadYT
      @LonelyBreadYT 4 роки тому +1

      Nikhil Verghese dude that would be so badass

  • @natk7731
    @natk7731 4 роки тому +161

    May the 4th be with you
    Tomorrow is revenge of the 5th

    • @FormulaCenter1
      @FormulaCenter1 4 роки тому +8

      NøkkNøkk revenge of the fifth is my birthday

    • @landonglick7174
      @landonglick7174 4 роки тому +1

      Billy bob 21 21 well happy birthday🎉

    • @TheConfusedWumbologist
      @TheConfusedWumbologist 4 роки тому +2

      @@FormulaCenter1 I'm a couple days late, but happy belated Birthday bro.

    • @Tigoros136
      @Tigoros136 4 роки тому

      NøkkNøkk haha

    • @Sparky-gp9vh
      @Sparky-gp9vh 4 роки тому +2

      Billy bob 21 21 may the forth is mine, and happy late brthday!!!
      Edit: birthday

  • @calebturner405
    @calebturner405 4 роки тому +1

    You just showed up in my reccomended feed, but I never knew I needed to find a channel so bad lol. I love the way you explain why you do what you do, as you are doing it. It clears up a lot, and makes the video a very straightforward, easy to understand, streamlined video. I love it!

  • @lenny_1369
    @lenny_1369 4 роки тому +10

    A common misconception is that the orange on the dome part goes all the way, I'm glad you got it right. It would have definitely looked cool if it goes all the way and also if the clones paint some parts of their armor orange other than the helmet but the clones were in a rush and it would make more sense if they just managed to paint half of the helm.

  • @danwolfe7665
    @danwolfe7665 4 роки тому +4

    Glad you’re back! I like the new bondo over everything technique. After building one of your kits I can see how that would save time over doing the filler primer first.

  • @dergooverjergo3900
    @dergooverjergo3900 4 роки тому +4

    This is the best clone trooper helmet I have ever seen

  • @korloq8968
    @korloq8968 4 роки тому +10

    The finale was so sad...the music at the end...damn. I heard somewhere that the song in the final scene with the graves of the clones, was supposed to be a lullaby for the Clones. They could finally rest at last, the pain, the suffering, the war...it was all over. The at last can rest peacefully.

  • @SuperLegolover23
    @SuperLegolover23 4 роки тому +2

    Welcome back! I’m so glad to see you! I’d love to see you tackle Rex’s helmet design. I feel like it’s hard to give justice with the weld lines and making it look right, so I’d be interested to see you take it on!

  • @christianmlejnek7620
    @christianmlejnek7620 4 роки тому +7

    I'd like a Bad Batch helmet, particularly Wrecker. Also, a Five's helmet or any 501st helmet would be cool. Nevermind on the Fives. I saw you already made one.

  • @isaacalvarado2568
    @isaacalvarado2568 4 роки тому +13

    Om goodness! My helmet! And new logo?

  • @foxehhinson3180
    @foxehhinson3180 Рік тому

    For rough edges, I use a resist, latex based masking fluid for water colors. I take a disposable paintbrush and apply the resist along the edges of the tape, so when I pull the tape up, it leaves behind a very jagged edge. I found ripping tape sometimes allows an overspray streak unless I aggressively smooth the tape down. Also fiber/hair like edges that erk my OCD.

  • @joshuagodwin5949
    @joshuagodwin5949 4 роки тому

    Idk anything about 3D printing, but an easy way to reinforce the 3 main pieces of the helmet would be to use dowel joints like in woodworking. If you combined that with what you already do I doubt it would ever come apart at the seam. I enjoyed your video and it's great to have you back.

  • @zachaboy
    @zachaboy 4 роки тому +4

    Loving the intro also welcome back and good choice of a build first video back

  • @k.lionmotivation4185
    @k.lionmotivation4185 4 роки тому +4

    I love how the intro is a quote from John wick!

  • @adonbilivitman9428
    @adonbilivitman9428 4 роки тому +3

    Thank you for this video my man. You're the reason I've bought a 3d printer and started to make helmets. Currently working on a phase 2 clone trooper.
    Keep up the great work and I can't wait for the next video.
    Suggestion: shadow scout trooper

  • @gerald0561
    @gerald0561 4 роки тому

    How I haven’t found your channel before the other day is beyond me. Keep up the good work dude this channel has so much potential, I see big things in the future

  • @ahsokatano5498
    @ahsokatano5498 4 роки тому +7

    I definitely approve of this.

  • @RSpudieD
    @RSpudieD 4 роки тому

    Very cool! There's still something about seeing the helmet bring printed and glued together that still brings a smile to my face. So cool!

  • @YD_.
    @YD_. 3 роки тому +1

    The respirator at the bottom actually disconnects at the teeth seam on the phase 2 helmets abd ARC trooper helmets.

  • @KingJake-om7yq
    @KingJake-om7yq 4 роки тому

    The bondo matches the 333nd orange color pretty well, and it has all the random smudges and streaks.

  • @relentlessphenix5665
    @relentlessphenix5665 4 роки тому

    Your a legand for doing this, Vaughn is my new fav CW character and you've captured his helmet completely

  • @kennyduke7805
    @kennyduke7805 4 роки тому +1

    I checked your channel every 2 weeks for u to come back!! Also this helm looks amazing

  • @solomonvaughn7774
    @solomonvaughn7774 4 роки тому +2

    Let’s go captain Vaughn! He’s got a cool name

  • @Reching_Bahl
    @Reching_Bahl 4 роки тому

    Glad to see you still at it. Thought I'd let you know the spot putty you have in the description is a two part you have to mix. I'm gonna use your zyltec code when they get some filament back in stock, felt weird using the unclejesy code when you recommend me the first time. When I finish my long delayed Mando helmet I'll grab your animated trooper helmet just gotta decide on the paint job.

  • @vaultfox
    @vaultfox 4 роки тому

    Welp, I didn't know about that "transform" tool in Meshmixer until now (I've been doing my plane cuts are extreme angles to get flat cuts!) so thank you for showing me this!! Helmet looks awesome, I'm hoping to print this soon and make my own 332nd!

  • @natemcentyre5522
    @natemcentyre5522 2 роки тому +1

    i hope this is seen!!! i would absolutely love to see a shore trooper helmet! every model i find is cut up into a million pieces but i would love a whole model!

  • @gonkdroid7207
    @gonkdroid7207 4 роки тому +18

    Could you make a commander gree helmet im making one at home but I'm only eleven so a tutorial would be nice

  • @hfklsd
    @hfklsd 4 роки тому

    For a quick join, I found that using a 3d Printing pen along the inside seams is a great and fast way to bond parts!

  • @lukewarman2248
    @lukewarman2248 4 роки тому

    I recently ordered a 3d printer and have just ordered everything else needed to make a helmet, going to go with the regular Asohka helmet for my first try so wish me luck. In the future I would like to either print an arc trooper helmet for Jesse or a phase two waxer helmet. Awesome guides and may the force be with you

  • @ploopy45
    @ploopy45 4 роки тому

    idk what it is, but theres something about Vaughn that makes him one of my favorite clones. we only got to see him in one episode, but he is still one of my favorites. rip Vaughn and Jesse and the rest of the 332nd

  • @craniumbear
    @craniumbear 4 роки тому

    I don't know if anyone has told you yet. You can save a lot of time if you make moulds of your smoothed helmets and cast them out of a roll or slush casting resin.

  • @HPIFreak
    @HPIFreak 4 роки тому

    just a suggestion, id recommend the pet safe screen for the mouth. its thicker, more durable and still cheap and you get a LOT in a roll. its the stuff you put on screen doors or patios and animal claws cant rip and tear it

  • @pilots1015
    @pilots1015 4 роки тому

    I really hope you get verified on UA-cam. You deserve it maybe more than other people.

  • @Kamelg
    @Kamelg 4 роки тому +1

    Welcome back my friend! :)

  • @Android_Adam
    @Android_Adam 4 роки тому

    I've been trying to make my helmets (and other projects) look a lot smoother. I'll be using your videos as references for now on.

  • @emperorpalpagames3314
    @emperorpalpagames3314 4 роки тому

    This year might now not be this bad anyways, thank you for being back!
    Edit: Happy Revenge of the 5th

  • @radionwave105
    @radionwave105 4 роки тому

    ohhh yeah your back and it will be really great !

  • @Rusty_Shackleford1
    @Rusty_Shackleford1 4 роки тому

    Awesome build and great tips for filling and sanding. The only thing that is not quite right is the little chin piece. It seems like it is longer in the show. Otherwise it is nearly flawless.

  • @howlingwolfawooo8129
    @howlingwolfawooo8129 2 роки тому

    Dude keep up the fantastic work on creating these dope ass Starwars helmets your work is amazing!!

  • @frekaingcodeh831
    @frekaingcodeh831 4 роки тому

    So glad to have you back! You are inspiring me to buy a 3d printer myself!! Are there any other 3d printers you could suggest?

  • @leephilips8294
    @leephilips8294 4 роки тому

    Not to slight your helmet in any way... But, this is the second one made I've seen and I'm making on one myself. And I just cannot get over the 7+ inaccuracies I've seen each time in the two helmets made. It just bugs my OCD. Ha. But, it's a beautiful helmet man. And you've poured a lot of hard work that has turned out pretty good. Great job, really...

  • @austinp5929
    @austinp5929 4 роки тому

    Something I haven’t seen made before and I’ve been looking forever has been a clone pilot phase 2 version one helmets. Not the ones in Rots or the yellow ones, but the ones we saw piloting the headhunters. Like hawks phase 2 helmet.

  • @grantuasops
    @grantuasops 4 роки тому

    Can't wait to see what you have in store for us! I bought and am building your clone armor now!

  • @_MadaraUchiha_
    @_MadaraUchiha_ 4 роки тому

    Great to see you back!

  • @conti3152
    @conti3152 4 роки тому +1

    Great job keep your work going! When will Helmets be available again on your website?

  • @indoorraccoon4450
    @indoorraccoon4450 4 роки тому

    Its great to see you back

  • @dryleopardd
    @dryleopardd 3 роки тому

    The best looking clone armor in my opinion

  • @LeonidasSparta-Fun-History
    @LeonidasSparta-Fun-History 4 роки тому

    Really nice build! Nice to see you back and with a logo change as well!!!!

  • @AverageReenactor
    @AverageReenactor 4 роки тому

    YOOOO IM SO HAPPY!!!!!

  • @tsivilsඞ
    @tsivilsඞ 4 роки тому +1

    If you take suggestions, I'd love to see you make Gar Saxon's mandalorian super commando helmet from when he served darth maul during the siege of mandalore

  • @MW2pawner123
    @MW2pawner123 4 роки тому +3

    How would you resize the helmet to fit you head? I’m looking on printing my own but my head is big aswell

  • @Napalm95
    @Napalm95 4 роки тому

    Glad you're back!!
    Would love to see that darth maul themed mandolorian helmet from clone wars

  • @star.wars.dude.789
    @star.wars.dude.789 4 роки тому

    14:37 I love how there’s just an unfinished arc trooper helmet in the background

  • @shawn-michaelbarnett1910
    @shawn-michaelbarnett1910 4 роки тому

    16:38 I am already at terms with sanding... If you've ever seen my collision repair class after a day of sanding body filler

  • @memusdankious9809
    @memusdankious9809 4 роки тому +6

    maybe do the mandalorian as i can see the print file in your shop, also Jesse would bee totally awesome.

    • @GalacticArmory
      @GalacticArmory  4 роки тому +2

      It's printing now!

    • @memusdankious9809
      @memusdankious9809 4 роки тому +1

      @@GalacticArmory omg dude u replied, I love your stuff and am trying to rent a printer so I can make one of your helmets, love the stuff, keep it up 👍🏿

  • @cheatj7598
    @cheatj7598 4 роки тому

    return of the king

  • @apineapple5560
    @apineapple5560 4 роки тому +1

    Also could you do a tutorial how to print all parts of the helmet?

  • @Draculord666
    @Draculord666 4 роки тому +1

    I've always loved Commander Fox, it'd be awesome seeing you make his helmet.

  • @jonathanh56295
    @jonathanh56295 4 роки тому

    Looks great!
    Also could you please consider making a in-depth tutorial on how to print a helmet? Including where to put support structures etc. I'm really close to buying a 3d printer just to print your helmets but I want to be sure that I'm actually able to do it once I spend all that money :D
    I know you already have a video on how you print your helmets but as I said a more detailed one would be nice.
    Keep up the great work!

  • @benkyokun5717
    @benkyokun5717 4 роки тому

    How many helmets can you make with one roll of filament? How you calculate how much to use? Great work!!

  • @omaryt9800
    @omaryt9800 4 роки тому

    IM so glad your back

  • @Pewpro
    @Pewpro 4 роки тому

    Welcome back vodé!!

  • @sailevillage6907
    @sailevillage6907 4 роки тому

    Amazing to see you back here, great job again, would you suggest to use a automation grinder if available for the bottom and other easy to reach parts?

  • @MrExplosion449
    @MrExplosion449 4 роки тому +1

    Ahsoka 501st is my favourite clone design

  • @adventuroussloth4907
    @adventuroussloth4907 4 роки тому +1

    Hey dude great helmet I always love them, I’m planning to buy from youre store but I need a soldering iron, wich of those do you recommend?

  • @angriestchezburger
    @angriestchezburger 4 роки тому +4

    vaugh must have walked into the armory the moment he was promoted, and when asked what accessories he wanted he respondes "yes"

  • @sharpesabre2423
    @sharpesabre2423 4 роки тому

    Would it look just as good if you were to skip the bondo step and use the filler primer instead? I am making my own clone trooper costume and I have plenty of primer but not a lot of bondo.

  • @piibubs
    @piibubs 4 роки тому

    Thank you so much for this tutorial!! I’m probably gonna buy the raw print, but I can’t wait to get started!!

  • @danielgallagher3608
    @danielgallagher3608 4 роки тому

    You should do a more pratice sun visor one or one that doesn't look as chunky

  • @TASKFORCEDRONGO
    @TASKFORCEDRONGO 4 роки тому

    What about General Veers’ AT AT helmet with the goggles?? Always loved that one

  • @L0kisBestFriend
    @L0kisBestFriend 4 роки тому

    Just a suggestion but maybe you should try using sand sponges. They are able to sand out round surfaces like a helmet more evenly

  • @mikemcbride8098
    @mikemcbride8098 4 роки тому

    Awesome video! Definitely appreciate that you broke it down step by step.

  • @unthinkable6180
    @unthinkable6180 4 роки тому

    How does this dude not have more subs!

  • @PrimeReclaimer
    @PrimeReclaimer 4 роки тому

    Glad to see you're back as I'm getting close to having my first clone helmet fully printed lol. One big question i have is if you have found that bondoing the entire helmet is really worth it? In previous videos you'd use it only for more major layer lines so I wasn't sure if maybe this is a new found method that you've found to work best. Thanks so much for these videos!

    • @GalacticArmory
      @GalacticArmory  4 роки тому +1

      I've found that it shortens the overall amount of sanding on the helmet. Plus I used to go through 2-3 filler primer cans per helmet whereas I can do a helmet in about 1 tube of bondo and 1 can of filler primer

    • @PrimeReclaimer
      @PrimeReclaimer 4 роки тому +1

      Galactic Armory Thanks so much for that info! That will help a lot as I already used a ton of filler primer on just a mando helmet and that has a bit less mass compared to a clone helmet.

  • @spamham3356
    @spamham3356 4 роки тому

    MAY THE FOURTH BE WITH YOU
    just noticed upload date lol

  • @spector_0
    @spector_0 4 роки тому

    Nice John Wick reference in the intro, awesome job on the helmet too!

  • @sryinge3867
    @sryinge3867 4 роки тому

    This is amazing you know all the designs, a true star wars fan now you've earned yourself a sub!

  • @shberfet2690
    @shberfet2690 4 роки тому +1

    How do you get nice overhangs? My prints always look messed up on the bottoms from support especially on the front round parts

  • @serennosquadcast8297
    @serennosquadcast8297 4 роки тому

    Yeah baby! Helmet looks great man 👌

  • @bostonmckibben1840
    @bostonmckibben1840 4 роки тому

    Would you recommend using wood filler instead of bondo?

  • @JW3D69
    @JW3D69 4 роки тому

    I just realized that Galactic Armory has a private helmet tutorial right now. Bro I want to see it

  • @matthewhuff7334
    @matthewhuff7334 4 роки тому

    How does the helmet and other armor hold up in hot weather? Say wearing it in Texas heat for a few hours?
    Is there any sizing/resizing one would do with a helmet to ensure a better fit?
    About how much filament do you go through per helmet, and per suit of armor?
    And will there be future files for commander pauldrons? Thanks!

  • @generalgrievous6689
    @generalgrievous6689 4 роки тому

    He was so cool the first time we saw him on Mandalore, and he died in the same episode, I was devastated.

  • @spooks1751
    @spooks1751 4 роки тому +2

    Can we get a F in the chat for Cpt. Vaughn.
    This complete *chad* will never be forgotten.

  • @jacobw7516
    @jacobw7516 4 роки тому

    Welcome back and good job! Love the videos! I want to get into making my own suit and my worry was using your 3d printing files but my head being to large. How can I ensure my big head will fit?

  • @dpswets
    @dpswets 4 роки тому

    I've never built such a helmet, but some foam inside might be an improvement for the fitment and comfort of your head

  • @bananenbrot05
    @bananenbrot05 4 роки тому

    Could you do a complete ARC-Trooper Armor, I would me amazed.
    I dont have a 3D-Printer

  • @spencerlenahan1505
    @spencerlenahan1505 4 роки тому

    Does it make a difference if you use the filler primer first vs. the Bondo? I was watching some of your older videos and saw that you do both ways. Thank you.

  • @xnation546
    @xnation546 4 роки тому

    Could you maybe do some of the bad batch armor??? Maybe Crosshair specifically??

  • @Eshayzbra96
    @Eshayzbra96 4 роки тому

    I kinda want one for paintball
    but how rigid is 3d printer material? Weak or fairly strong?
    obviously i'd want to have a genuine mask underneath, which would make for a tight fit

  • @ClaireDuhLune
    @ClaireDuhLune 4 роки тому +1

    I wish I could get my Ender 3 to work. I got it on Christmas day and it's been a very confusing on-and-off process is trying to level it and get good settings to print PETG helmets and whatnot.

    • @ClaireDuhLune
      @ClaireDuhLune 4 роки тому

      Also I've used bondo on some EVA Foam projects without proper ventilation and no respirator IN MY BEDROOM. I'm pretty sure I got high off the fumes for like 2 weeks straight.

    • @niffirg1113
      @niffirg1113 4 роки тому

      id reccomend getting acquainted with PLA before switching to other filaments because that will make things easier

  • @arnaudborne6904
    @arnaudborne6904 4 роки тому

    I have suggestions for either Fives, Gree or Wolffe