Event Horizon thats not the chronological order of the story though it should be 123 (origin or Darth Vader and everything), rogue one (they get the blue prints), 456 (rebellion after they get the blueprints), 7 (and 89 coming out later)
You also might like a Captain Rex's Storm trooper armor set. Captain Rex was an original and is very good with blasters, mini guns, etc. He was also one of Jedi Anakin's Trainers before he switched sides and became darthvader and then get absolutely obliterated.
Fellow propmaker here, this is one of the best projects I've seen you do yet. You're really tempting me to finally get around to upping my CAD skills. I'm seeing a lot of advantages of doing a print over molding and casting a sculpt; especially for one-off props.
And of course you could stop at an earlier point and mold and cast if you didn't want to go through printing and cleaning it up. Also give you chance to use a superior material.
verdatum If your a prop maker...... I'd like a Samus helmet master chief helmet soldier 76 gloves jacket and face mask Boba and mango fett helmet along with a pilot helmet from Titan fall.Whats the total cost?
I LOVE YOU Personally, I don't do sewing projects like the Soldier jacket; I'd outsource that. I have no idea who "Mango fett" is, so I'm leaving that out. Depending on the design, there's a very good chance you'll be blind while wearing the Titanfall helmet. Presuming you want Hollywood-film quality dead-on realism, I'd give a ballpark estimate of about $30k, not including licensing issues, of course.
verdatum Lmao I put "mangofett" .Nah but it was a joke.But if I wear to try and get these I wouldn't go for dead on realism.Going for dead on realism would be too pricey and unneeded.Instead a simple version of it with out the colors would be fine enough as any body can get tape and spray paint the object.I find it kind of funny that you took this as a order.Although I do like the fact that you were very professional in terms of responding to my comment.
Pro tip if you want correct colours ... 99% use ww2 German RlM colours of the Luftwaffe and panzer divisions , all the empires colours are based on this , since rouge one is empire cannot go wrong
Rogue one was by far one of the best movies I had ever seen, and I love the helmet, maybe you should try other Star Wars helmets? Like Captain Rexs' helmet, or a shadow trooper hemet
This video and your helmet are the best things ever. I have a 3D printer that I have not been using to its full potential and you inspire me to be a better maker!
whats great is that it doesnt have to be screen accurate at this point. its your variant now and you can add your own embellishments to the armor. Great Job, totally inspired me to make one. I dont have a 3d printer but i have a heat gun, a few 3L soda bottles, spray paint and a few hours to kill im sure i can knock something out.
I end up getting the helmet all smelly due to bad breath -.- So, I think IF I make something it'll be a rebel helmet. Like on endor. So it wont cover my face and such.
unsure of how the 3d printed material holds up, but i did the exact thing to weather my fiberglassed Boba Fett helmet. smacked it against some concrete block, rubbed charcoal all over it. Turned out real nice. The best way to get that "real weathered" look is to paint a silver and black as the base layer so when you chip off your actual top color, it has that very minute depth to it that makes it more realistic up close. I tried putting the silver and black on over top my top color and it looked exactly like i did that hahah
I saw a great trick for weathering from Frank Ippolito where you first lay down a silver coat and apply some toothpaste to it so that it looks like it is scratched. Than you go over the whole thing with your main color and when it is set you can just simply wipe the toothpaste away and you are left with awesome scratches.
I recently was informed of an technique that has been working for me. You thin out the bondo with some acetone or rubbing alcohol. this allows you to put on thinner layers to fill inthe layer lines. i use 400 grit sand paper to smooth it all out.
I Like To Make Stuff i'm a bastard like that LOL By the way, love the channel. I saw the life casting videos that you did with Bill, he's pretty great LOL
I've found that a cheap marble tile or pastry board has an incredibly smooth an rigid surface for sanding. Use some rubber cement on both the sand paper and marble. Let dry then stick together. Great to doing edge joining of small parts... also works awesome for sharpening chisels with a jig.
If you use the heat gun on the window tint first to "shrink wrap" it to the shape then apply it It might work better. But while I am typing this I am thinking that unique shape might not matter what order you do it. But that is how it's done for odd shaped glass in automotive. But I have to say you did a great job and the helmet looks awesome
a good trick with bondo is drop some of the puddy stuff down, then put a small bead of the activader through the middle. This will result in a almost perfect mixture every time. Hope this was helpful.
Sir Skeletor I've seen all nine movies and the story goes like this. The whole series is just a dream of Chewbacca during a long journey in the Millennium Hawk. :P
ShareTN False, there are 11 movies and they are all dreams of Chewbacca but the 10th one it is revealed that Jar Jar Binks is snoke and Ham Solo is killed by his son, jar jar banks.
Wow that looks amazing and very time consuming. Good job and I wanted to recommend placing window tint or any kind of film with adhesive on the direct middle of the piece you are trying to cover. It will help remove all of the air bubbles due to the middle pushing air outward.
It's actually on the printer right now (not my model, one that someone sent me) I'll probably be building it on my Twitch live stream over the coming weeks. www.twitch.tv/iliketomakestuff
Death Star productions don't know if this helmet in eva specifically, but check out my Batman helmet video to see the process. Also, check out everything from Punished Props.
Death Star productions My local library has a 3D printer that anyone can use. Check for similar resources in your town, such as high schools or park districts.
Thanks for the video. I'm making this helmet now for the entire costume I will submit for 501st approval next year. I sanded the parts before I adhered them because I thought it would be easier to sand in the detailed and small areas easier than when it's together.
Not going through all the comments to see if it was already mentioned, but the Mandalorian Mercs (MMCC) usually use cut down welding visors for their visors. Somrthing to consider next time.
Great project and thanks for all the cool projects you do. I dabble in some autobody and found a product called Dynatron Putty-Cote unlike Bondo this product is designed as a finish coat and is very easily sanded to a feather edge and would be great for projects like this.Product is a 2 part and mixes the same
this turned out wonderfully! a few things you may want to consider in the future: when bonding with CA glue or 5 min. epoxy, you should really consider sanding away the paint and primer in the areas to be joined. you may find in a few years, that the visor may just fall off as it stands now. same thing applies for plexiglass. the areas to be bonded, should have been roughed up just a bit (though this is less of an issue, as it wasn't painted or primed). i'm sure another may have already mentioned this- but plexi is available in multiple shades of black, with varying degrees of opacity. next time you could save a bit of hassle with that window tint. the only other thing i can think of that's worth it's weight in gold for projects like this, is the red bondo spot putty, during the sanding/seaming/refining stages. just apply it right outta the tube (no hardener required). it dries rapidly and sands like a dream. perfect for smaller areas when mixing and using standard bondo would be so much more hassle. once again- great job and keep up the fantastic work!
ive got a full stormtrooper outfit and now working on the new order version also have a near finished life size R2D2 and like you i want to make the full new order suit. Great video will be looking out for more of your stuff :D
Great job on the trooper helmet I was at the Aussie Supernova on the weekend and was talking to a lady in amazement who 3 D printer her entire Cpt Phasma cosplay costume very impressive and well worth the effort hey Good video
pro tip for the hardener : put a line of hardener the length of the diameter on the top of your filler and then mix. It should be the perfect ratio everytime.
Using putty glaze over the seams might produce a better result. Putty glaze cures smoother than bondo and is typically used on top of bondo to smooth/cover imperfections (eg: pin holes,). You can also use acetone to smooth out the 3d prints instead of sanding but experience is required with this method.
I actually couldn't find any glaze locally (forgot to look at the auto store) and had to order it. I just used the bondo to get the project finished. Acetone works for ABS plastics, but I printed this in PLA so unfortunately it wouldn't work :/
Nice job!!! I just got a 3d printer and am going over different SW helmets to figure out which one I want to make first. Nice process and it looks awesome.
Finished my exams. had not seen any star wars yet!! Download all 7 episode to watch and get ready for rogue one. yeah!!!😉
Kicstar V watch Rogue One first, and then watch the other episode. you will get it.
Kicstar V Enjoy it!
Kicstar V you should watch it in the order: episode 1,2,3,rogue one, 4,5,6,7
Event Horizon thats not the chronological order of the story though
it should be 123 (origin or Darth Vader and everything), rogue one (they get the blue prints), 456 (rebellion after they get the blueprints), 7 (and 89 coming out later)
Event Horizon I see where you get it from, but i always prefer the chronological order
Favorite project that you ever made: confirmed.
:)
Wow !!
Wow Also!
BTW Seen it... It's Awesome!
Hi diresta :D I love your vids
W OMEGALUL W
this is actually really good and one of my favorite things that i've seen 3d printed
I´m very interested to do this in my free time when I am older...
I just dream of a Death Trooper costume in a quality like this xD
i will remind you...
There your older now
You also might like a Captain Rex's Storm trooper armor set. Captain Rex was an original and is very good with blasters, mini guns, etc. He was also one of Jedi Anakin's Trainers before he switched sides and became darthvader and then get absolutely obliterated.
Did you do it yet?
Absolutely wonderful!!! The project, process, video, and your enthusiasm, all inspiring and a pleasure to watch!
Fellow propmaker here, this is one of the best projects I've seen you do yet. You're really tempting me to finally get around to upping my CAD skills. I'm seeing a lot of advantages of doing a print over molding and casting a sculpt; especially for one-off props.
And of course you could stop at an earlier point and mold and cast if you didn't want to go through printing and cleaning it up. Also give you chance to use a superior material.
verdatum If your a prop maker......
I'd like a Samus helmet master chief helmet soldier 76 gloves jacket and face mask Boba and mango fett helmet along with a pilot helmet from Titan fall.Whats the total cost?
I LOVE YOU Personally, I don't do sewing projects like the Soldier jacket; I'd outsource that. I have no idea who "Mango fett" is, so I'm leaving that out. Depending on the design, there's a very good chance you'll be blind while wearing the Titanfall helmet. Presuming you want Hollywood-film quality dead-on realism, I'd give a ballpark estimate of about $30k, not including licensing issues, of course.
verdatum Lmao I put "mangofett" .Nah but it was a joke.But if I wear to try and get these I wouldn't go for dead on realism.Going for dead on realism would be too pricey and unneeded.Instead a simple version of it with out the colors would be fine enough as any body can get tape and spray paint the object.I find it kind of funny that you took this as a order.Although I do like the fact that you were very professional in terms of responding to my comment.
Bob...That's badass. Amazing work!! Great job!!
Thanks Josh!
This is a reminder that you wanted to make the whole armor. I'd love to see you make it.
Nice! You should do the "Mandolarion Helmut as well.
That's some damn good spelling right there
i agree
@@RowdyBrian17 username checks out
There is a build in UA-cam that’s really good
@@crappiegamer2341 what is it of?
Pro tip if you want correct colours ... 99% use ww2 German RlM colours of the Luftwaffe and panzer divisions , all the empires colours are based on this , since rouge one is empire cannot go wrong
The official color is Sahara Beige
Rogue one was by far one of the best movies I had ever seen, and I love the helmet, maybe you should try other Star Wars helmets? Like Captain Rexs' helmet, or a shadow trooper hemet
This video and your helmet are the best things ever. I have a 3D printer that I have not been using to its full potential and you inspire me to be a better maker!
That's awesome to hear, thank you!!
boi wat u doing in ur life 3d printer is a thing that i always wanted in my life.
whats great is that it doesnt have to be screen accurate at this point. its your variant now and you can add your own embellishments to the armor. Great Job, totally inspired me to make one. I dont have a 3d printer but i have a heat gun, a few 3L soda bottles, spray paint and a few hours to kill im sure i can knock something out.
If I owned something like that I'd never take it off
I end up getting the helmet all smelly due to bad breath -.- So, I think IF I make something it'll be a rebel helmet. Like on endor. So it wont cover my face and such.
lovebird mic Brush your teeth, are you a caveman?
Trust me, you will hahaha
This is the way
this is the way!
I'm not a big Star Wars fan, but this looks really good!
Hotwheels Dd same lol
Hotwheels Dd same..
Bob this might sound weird but you should drop it or scratch it a little bit. To give it that extra touch!
lol that does sound weird but thats a good idea
unsure of how the 3d printed material holds up, but i did the exact thing to weather my fiberglassed Boba Fett helmet. smacked it against some concrete block, rubbed charcoal all over it. Turned out real nice. The best way to get that "real weathered" look is to paint a silver and black as the base layer so when you chip off your actual top color, it has that very minute depth to it that makes it more realistic up close. I tried putting the silver and black on over top my top color and it looked exactly like i did that hahah
This is great!! I'd love to see you do more of these. Maybe the Death Trooper or Boba Fett!
I probably will at some point, as long as I can make sure that the videos offer some new info for people to learn. Thanks!
I’ve been assembling a Scout Trooper helmet for the past few months and I’ve learned so much on what NOT to do. This really helped to learn
I saw a great trick for weathering from Frank Ippolito where you first lay down a silver coat and apply some toothpaste to it so that it looks like it is scratched. Than you go over the whole thing with your main color and when it is set you can just simply wipe the toothpaste away and you are left with awesome scratches.
Holy smokes! That's amazing. Your work is inspring.
pleas make the armor it would be so cool
zwartepeter69 that would take ages
zwartepeter69 it would take 2 years with 1 printer
The question is: Can you aim with it?
of course not are you mad
Oh I thought you could. That would have broken the laws of the universe.
I don't think it would be good sights for a weapon.
No
Well… shore troopers in rogue one had a pretty good aim
I loved the this trooper's helmet model way more than any others before
That scarif trooper helmet looks really cool and I wished I can things like that, so cool.
Yes! Armour would be fantastic!
Dude, that turned out AMAZING. Gonna wear it to the theater?
Thanks man! I just might ;)
I Like To Make Stuff you better! Seriously man, that is some incredible work. I really need to dig into learning Fusion.
Leave it in the desert for a few weeks to weather it even more haha
practical effects taken to the next level
dude that haha in you sentence is super poor
f**k. u
Chelsie Elder fuck you too
I recently was informed of an technique that has been working for me. You thin out the bondo with some acetone or rubbing alcohol. this allows you to put on thinner layers to fill inthe layer lines. i use 400 grit sand paper to smooth it all out.
7 years old and I still watch this regularly because I want this helmet over any of the star wars helmets out there
Rogue One spoiler:
PEWPEWPEWPEW BOOM! POW *robot noises*
Awww man.. you gave away the ending!!!! ;)
I Like To Make Stuff i'm a bastard like that LOL
By the way, love the channel. I saw the life casting videos that you did with Bill, he's pretty great LOL
@I Like To Make Stuff lol 😂 I never saw it cuz I don’t like StarWars hehe
if I just had a 3d printer.....
you can still do helmets out of foam! There's a very good explanation on these on Tested :D
Lellba47 yeah I know, i've seen some amazinf foam helmets and stuff
If youre looking for a cheap printer, try the anet a8 from GearBest. it's 150 bucks and ships worldwide.
Look into the Anet A8, cheap printer that brings surprising results.
That's surely not big enough to make a helmet of this size though right
Dude! That's crazy awesome!
Thanks man!
my son is a big fan of star wars and he loved this project...thanks for sharing
Now this is a guy with a lot of patience. I like this guy. Very precise with everything why is no one else like this in today's generation?
Jindevilt V hi
This is awesome man. I just found your channel and I love it! Keep it up man!
man thanks I love star wars
me too!
Nice I can't wait till the new one comes out!! Are you excited ?
Florent Saliu of course!
Nice man !! 👍
I Like To Make Stuff hi
Man, this is amazing. Technology is leaving me trailing. I'd love to get into all this but my brain just won't learn computers.
I've found that a cheap marble tile or pastry board has an incredibly smooth an rigid surface for sanding. Use some rubber cement on both the sand paper and marble. Let dry then stick together. Great to doing edge joining of small parts... also works awesome for sharpening chisels with a jig.
If you use the heat gun on the window tint first to "shrink wrap" it to the shape then apply it It might work better. But while I am typing this I am thinking that unique shape might not matter what order you do it. But that is how it's done for odd shaped glass in automotive. But I have to say you did a great job and the helmet looks awesome
Spoiler alert: that one guy does that one thing
NOOO THE ENTIRE FILM'S RUINED NOW!!! HOW COULD YOU?
Benjamin Cole When Vader decapitated the main characters?
Abe The Rock and when all the main characters died getting the plans?
planbskater19 ROBLOX Delete your channel.
christianoh98 lol no kid
"RKGIENFJEJFMEKDKE"
(We need a Death Trooper helmet!)
yeeeeeeeeeeeeeto
Bob help, I made the helmet and now I can't find the tools I'm looking for.
a good trick with bondo is drop some of the puddy stuff down, then put a small bead of the activader through the middle. This will result in a almost perfect mixture every time. Hope this was helpful.
Rogue One was an amazing star wars addition
Great Job !
*Spoiler alert*
Han Solo dies. Errr, no. I mean. Chewbacca loses hair and a ball of it gets stuck in his throat and eventually dies.
Wrong, leia is revealed as Chewie's grandmother and is killed by the shock. You clearly haven't seen the movie, so don't act like you're smart.
Sir Skeletor I've seen all nine movies and the story goes like this. The whole series is just a dream of Chewbacca during a long journey in the Millennium Hawk. :P
ShareTN False, there are 11 movies and they are all dreams of Chewbacca but the 10th one it is revealed that Jar Jar Binks is snoke and Ham Solo is killed by his son, jar jar banks.
Sir Skeletor hahaha. I'm waiting for the 12th to come out. They say C3PO and R2D2 finally make it to the third base.
ShareTN Wait, wtf.
You realy should make the rest of the armor. After that put it on a dummy and put it in a corner :O :D
Great idea
Dennis And it would take ages to make
Work that into the Star Wars Nativity Scene.
yesh eyshhsheyadsadaseeeeeeeya
I've always been on the jedi's side, After watching this I think I want to be a storm trooper now! xD
So cool! Not really a fan of StarWars but I really like it. Like the “rust, dirt, scratches” lol
Wow that looks amazing and very time consuming. Good job and I wanted to recommend placing window tint or any kind of film with adhesive on the direct middle of the piece you are trying to cover. It will help remove all of the air bubbles due to the middle pushing air outward.
Make a shoretrooper gun!!
It's actually on the printer right now (not my model, one that someone sent me) I'll probably be building it on my Twitch live stream over the coming weeks. www.twitch.tv/iliketomakestuff
I Like To Make Stuff okay nice👌
Joran It has a name u know
I think it's called E-something
Lil Jo-Jo
Great idea
😇👍🏼
Get ready to go viral!
Can you make one without a 3D printer? I don't have one :(
Some people have done it with EVA foam floormats.
I Like To Make Stuff Are there any videos of that? I really want to make one
Death Star productions don't know if this helmet in eva specifically, but check out my Batman helmet video to see the process. Also, check out everything from Punished Props.
I Like To Make Stuff is there a template? Or do the have a tutorial how to make it
Death Star productions My local library has a 3D printer that anyone can use. Check for similar resources in your town, such as high schools or park districts.
The dark edging gives it a Borderlands vibe! Great work.
Montana Gold Sahara Beige is the screen used color, Toyota Super Red II is the red for the logo.
Spoiler:Your awesome dude
I SAID NO SPOILERS!!!! oh.. thank you :)
When will you make a he man sword
I made it on my live streams on Twitch a while back. www.twitch.tv/iliketomakestuff
I Like To Make Stuff is there a way to rewatch that stream
Robby Collins They stay on Twitch for a little while but fall away after a certain amount of time. Unfortunately that one is gone by now :/
I Like To Make Stuff aww man I was really looking forward to making a he man sword
I like it can you make me some clone trooper armor? I would love it.
3:39 huge
So big.....
*That's what both of the opposite males said*
i really like how true ARTIST do their JOBS; perfectionist
Thanks for the video. I'm making this helmet now for the entire costume I will submit for 501st approval next year. I sanded the parts before I adhered them because I thought it would be easier to sand in the detailed and small areas easier than when it's together.
It's Scarif Trooper.
No. Scarif is a planet. They're called shore troopers. www.starwars.com/databank/shoretroopers
The Rebellion I've only seen them called that by people who don't know that they're called ShoreTroopers.
+I Like To Make Stuff Hey, I'm just saying they're called by a different name.
You can call them what you want to call them.
Star Wars Battlefront calls them Shoretroopers buddy.
Ok, but they're called "Scarif Troopers", too.
I'm a Star Wars nerd to or fan
can I have that?
Shoretroopers are my favorite so thanks for making this video
I AM AS EXCITED AS YOU ARE ABOUT ROUGE ONE AND STAR WARS
It looks REALLY clean!
The design of the shoretrooper helmet is pretty impressive like i would use that as the new standard us army helmet
Not going through all the comments to see if it was already mentioned, but the Mandalorian Mercs (MMCC) usually use cut down welding visors for their visors. Somrthing to consider next time.
The imperfections are what make it perfect!
Great project and thanks for all the cool projects you do. I dabble in some autobody and found a product called Dynatron Putty-Cote unlike Bondo this product is designed as a finish coat and is very easily sanded to a feather edge and would be great for projects like this.Product is a 2 part and mixes the same
this turned out wonderfully!
a few things you may want to consider in the future: when bonding with CA glue or 5 min. epoxy, you should really consider sanding away the paint and primer in the areas to be joined. you may find in a few years, that the visor may just fall off as it stands now. same thing applies for plexiglass. the areas to be bonded, should have been roughed up just a bit (though this is less of an issue, as it wasn't painted or primed).
i'm sure another may have already mentioned this- but plexi is available in multiple shades of black, with varying degrees of opacity. next time you could save a bit of hassle with that window tint.
the only other thing i can think of that's worth it's weight in gold for projects like this, is the red bondo spot putty, during the sanding/seaming/refining stages. just apply it right outta the tube (no hardener required). it dries rapidly and sands like a dream. perfect for smaller areas when mixing and using standard bondo would be so much more hassle.
once again- great job and keep up the fantastic work!
May not be a 100% screen accurate, but that helmet is WICKED AWESOME! Love it man!
Very cool how to. Helmet turned out great.
Thanks!
This. Is. Awesome!!! You even sound like a real stormtrooper when you put it on!
ive got a full stormtrooper outfit and now working on the new order version also have a near finished life size R2D2 and like you i want to make the full new order suit. Great video will be looking out for more of your stuff :D
You can use simple pencil graphite to rub off on sharp corners to fake the paint weathered to the metal layer effect.
That's about as awesome as awesome gets. Excellent job.
Great job on the trooper helmet I was at the Aussie Supernova on the weekend and was talking to a lady in amazement who 3 D printer her entire Cpt Phasma cosplay costume very impressive and well worth the effort hey
Good video
This is really cool! I want to make one so bad now, but add a rebel touch to it.
pro tip for the hardener : put a line of hardener the length of the diameter on the top of your filler and then mix. It should be the perfect ratio everytime.
super job. Be proud man!
Use rust oleum tan for the color. That’s what I used and it’s the perfect shade
Excellent build - watched to the end. Thanks for sharing. Looked great after weathering...
Beautiful application for a 3D printer.
Wow Bob that looks freaking awesome!!
Thanks!
The assembly of the 3d printed parts is so satisfying to watch. Awesome job!
Using putty glaze over the seams might produce a better result. Putty glaze cures smoother than bondo and is typically used on top of bondo to smooth/cover imperfections (eg: pin holes,). You can also use acetone to smooth out the 3d prints instead of sanding but experience is required with this method.
I actually couldn't find any glaze locally (forgot to look at the auto store) and had to order it. I just used the bondo to get the project finished. Acetone works for ABS plastics, but I printed this in PLA so unfortunately it wouldn't work :/
You can usually pick a tinted visor from some motorcycle shops for about $15 to $20 bucks and cut them down a bit.
note:
in this type of project two colors of primer is useful because you can see where it went on and it doesn't affect the finished product
Wooow lot of work despite the printer .... Great job!!!
Damn the empire needs to hire you!
that looked super cool!
What an amazing job! Impressive work man!
This looks pretty amazing how you turn a image into this 3d item
The image is just for reference when he models it in 3D
I remember when I stumbled upon this channel when it had somewhere around 300k subs a few months back, now he has over a million! Good job!
Nice job!!!
I just got a 3d printer and am going over different SW helmets to figure out which one I want to make first. Nice process and it looks awesome.
I still think that this is one of your best projects.
I think I had a smile on my face the entire time I watched this. Fantastic job, Bob!
Thanks man :)
Super impressed mate! Well done 👍🏻
Very very cool project. Nice work!