I think the only reason most people don't have a 3D printer is because how expensive they are. If you can afford it go for it. I just wouldn't recommend super cheap printers because the cheaper ones are usually very limited in what you can do.
@@BellPepperBrian Well thats pretty ignorant to say they should be able to afford that. First off, you can get a cheap or used computer for $200 which is way cheaper than a decent printer so you are just blatantly wrong about 4x the price. Second, a computer can be used for everything from your job, communication,video games, research and literally millions of other things and is usually shared with their entire household giving it way more utilitity and justifing the price point . Your comment just really doesn't any make sense since you are assuming everyone owns a top end computer when alot of people can't even afford a computer, let alone a computer and a printer since a computer is needed to effectively use a printer, plus a computer is 1000 times more useful.
The best part is the fact that, because you start with a blank phase II helmet, you could literally make any clone trooper helmet you want with a little bit of modification and some paint.
that good that we all have a 3D printer, thanks for the crack data, without your help I would not have realized that I need a 3D printer to be able to make the helmet in a well-made way
been doing a similar process at work for over a year now. i used to use that rustoleum 2 in 1 filler primer, but have switched over to one from SEM. the SEM high build primer is pricey but it sands much nicer, dries faster and has a good nozzle for even coats. cans seem to last a lot longer too.
This is sweet, have you considered maybe trying to do one of the new sith trooper helmets? Tbh I'd love to just see a first order helmet on general but really weathered cos it's not something we usually see! Great video I hope to get a 3d printer in the future and get into doing this stuff !
I took a butane torch to my helmet in some spots and melted the plastic a little to add some more battle scaring. Something to add some realism and a little detail.
hey man, so I love your stuff, actually in the process of making the Kashyyyk trooper now, there is ONE small nitpick to make on your phase 2 helmets, and like i said SUPER minor, the knob on the back center of the Phase 2 actually has like what I like to call a "Reese Cup" pattern on it. This is more easily visible on the back of Commander Appo's helmet when he is asking Bail Organa to leave the Jedi temple. I don't think this is a crucial detail, I'm not even positive the 501st looks for this, so the importance of it is very minimal. Keep up the good work though dude, loving the content and the files you're putting out.
Do you have any recommended printer settings for these files? I'm about to print my first one purchased from your site! Quality? It looks like you don't need supports inside? Anything else?! Thanks!
I'd recommend some hot glue and packing foam. Super simple, just place the foam wherever your forehead, cheeks, and back of your head hit the helmet. If it's too big, get thick pieces of foam to make it fit more snug on your head. That's what I always do.
Do I need to do the filler primer step if my helmet is already pretty smooth. I understand i need to use some form of primer, but will i need filler primer. (the helmet is a resin cast)
Actually. In the films involving commander bly, especially revenge of the sith, he does not have that brown paint on his helmet chin. Look closely at the bottom of his helmet before he kills Aayla Secura
i've been thinking of adding a similar visor to one of my own helmets, but one thing i'm wondering is if there's room inside it that you could fit a small pair of actual binoculars into it?
What link sends you to the ones that you can buy that he's 3d printed? I can only find the files on the stores. Edit:nvm I found them and it says that its sold out.
How much for a custom helmet? Is it possible to create a Phase 3 Clone/Stormtrooper helmet from the PS2/Wii The Force Unleashed? I really want a Triton Squad helmet. Would pay $200 for one.
After watching this, i'm seriously thinking of getting myself a 3d printer.
It'll cost you atleast $200 just so you know.
I think the only reason most people don't have a 3D printer is because how expensive they are. If you can afford it go for it. I just wouldn't recommend super cheap printers because the cheaper ones are usually very limited in what you can do.
@@BellPepperBrian Well thats pretty ignorant to say they should be able to afford that. First off, you can get a cheap or used computer for $200 which is way cheaper than a decent printer so you are just blatantly wrong about 4x the price. Second, a computer can be used for everything from your job, communication,video games, research and literally millions of other things and is usually shared with their entire household giving it way more utilitity and justifing the price point . Your comment just really doesn't any make sense since you are assuming everyone owns a top end computer when alot of people can't even afford a computer, let alone a computer and a printer since a computer is needed to effectively use a printer, plus a computer is 1000 times more useful.
Diogo Teixeira I’m super lucky because I got one for christmas
I have saved up and got myself a printer and it is one of the best purchases I’ve made
u should make a Colt, Havoc,and Blitz helmet.
CGT he should do hevy
Rancor Battalion would be so cool.
Colt, Blitz, Hammer and Havoc helmets!
Agent_Duck hevy just had a normal phase one helmet
Agent_Duck hevy just had a normal phase one helmet
CGT you made me realize a clone named blitz exist so I changed my pfp to blitz
8:37 pretty sure they are called split pins if anyone wanted to know 🙂
Me:(doesn’t have a 3D printer
Also me:(looks at my 3D pen)
if there's a will, there's a way lol
I belive in you!
Thanks
I made a sith trooper helmet with my 3D pen. It took me 2 weeks but it is really cool,so never give up
Did you wear it
>>How I Made a Commander Bly Clone Trooper Helmet
>> prints it.
Lol
@Pierre-Luc Bard who asked
Seoul jeez asshole
Seoul imagine saying “who asked” to sound cooler than everyone else
DJ Skullboy that’s not even why, his comment has nothing to do with the first comment
I know I’m late but this is the most realistic Star Wars helmet I’ve even seen , the little scratches and the subtle weathering really does it for me
Bly has an amazing helmet design and I love the 327th, thanks man
Amazing bro, I would like to see commander Bly in his phase II Armor in the Clone wars!!!
What do you mean Phase II ? He made Phase II. Unless you mean Phase I.
@@cyphalzuo i mean in The Clone Wars serie. Happy new year Commander Thorn!!!, or the person inside the mask.
@Felipe Luna Mora happy new year!
Felipe Luna Mora hopefully he makes an appearance this year with season seven!
You guys notice, i don't remember seen any "normal" pauldron in The Clone Wars series after the clones star using phase 2 armor
This episode is my favorite. Love the humor. This is definitely where the fun begins.
I would make Gree, he's my favorite clone. But Boba is my favorite character of all time.
So boba is ur fav clone he is a clone
@@duckyyy8923 Boba Fett is not a clone are you fucking mad
@@mv9370 Yes he is, Jango wanted a clone without any modifications to raise as a son
Jango Fett is my Favorite enough said
@@jessicathecoolestxi1097 I can see why he's called that
The best part is the fact that, because you start with a blank phase II helmet, you could literally make any clone trooper helmet you want with a little bit of modification and some paint.
i think ive watched this video about 5 times and it still doesnt get boring i love commander bly
I must purchase, it makes me happy. It would be a great set filler
No...YOUR AN IMPOSTER!
that good that we all have a 3D printer, thanks for the crack data, without your help I would not have realized that I need a 3D printer to be able to make the helmet in a well-made way
3D printers really aren't all that uncommon. Yeah, 5 years ago they were pretty hard to come by but nowadays they really aren't that hard to get.
I love Commander Bly. The 327th are my favorite because they fight through the harshest environments
Mad respect to the troopers who fought on Felucia
Hugh Chungus and Mygeeto
Wow really niiiiiiiicceeee helmet !!!!!! The intro is fun ^^
"i bought one"
end of video
It’s a joke…
been doing a similar process at work for over a year now. i used to use that rustoleum 2 in 1 filler primer, but have switched over to one from SEM. the SEM high build primer is pricey but it sands much nicer, dries faster and has a good nozzle for even coats. cans seem to last a lot longer too.
Look awesome. And it really looks like something you can pull of without experience
Easily one of my favourite intros to a video ;)
This is sweet, have you considered maybe trying to do one of the new sith trooper helmets? Tbh I'd love to just see a first order helmet on general but really weathered cos it's not something we usually see! Great video I hope to get a 3d printer in the future and get into doing this stuff !
Thank you! I happen to have a Sith Trooper printing right now!
The first order is weak. Bow to the might of DA EMPIAHHH
I took a butane torch to my helmet in some spots and melted the plastic a little to add some more battle scaring. Something to add some realism and a little detail.
Boy is my fav commander so as u can probably tell I was very happy for a how to on his helmet
Great job, the finish and weathering looks great! I'm still working on the wolffe helmet I bought from you
I was thinking of creating Commander Bly's Phase 1 helmet but with his Phase 2 markings on it
Question: Would the binocs be able to attach to your Neyo/BARC helmet with a few modifications?
Man you've earned my subscription and I'm definitely buying
As always. Great vids !
The metal thing for the macro binoculars is called a brad
Hi! Everything you do is really cool! Can I buy a collapsible helmet, and I have already painted and glued it myself?
hey man, so I love your stuff, actually in the process of making the Kashyyyk trooper now, there is ONE small nitpick to make on your phase 2 helmets, and like i said SUPER minor, the knob on the back center of the Phase 2 actually has like what I like to call a "Reese Cup" pattern on it. This is more easily visible on the back of Commander Appo's helmet when he is asking Bail Organa to leave the Jedi temple.
I don't think this is a crucial detail, I'm not even positive the 501st looks for this, so the importance of it is very minimal.
Keep up the good work though dude, loving the content and the files you're putting out.
Hey, so it's kind of a disputed detail since you can clearly see it on Appo but it's totally gone from all other clones
Do you have any recommended printer settings for these files? I'm about to print my first one purchased from your site! Quality? It looks like you don't need supports inside? Anything else?! Thanks!
He has a video on the topic
Great tutorial!!
Your helmet looks awesome
Could u do phase 1 clone helmets?
Nice! Think you could make a tutorial on padding the interior?
I'd recommend some hot glue and packing foam. Super simple, just place the foam wherever your forehead, cheeks, and back of your head hit the helmet. If it's too big, get thick pieces of foam to make it fit more snug on your head. That's what I always do.
Love this helmet so much! You should make a Jesse helmet!!!
His first vid is a phase 2 501st trooper, you could make one, and all you’d need to do is paint I like his
Do you include different head sizes in your files? Because I have a rather large head and I'm afraid the default size won't fit.
I love the color scheme
Make a commander fox helmet next
about how long does it take you to make one helmet?
Hi just wondering are these binoculars the same ones in your files?
Dude this looks so fun to do
That looks awsome good job
Commander Bly is the best
Coolest etsy I’ve seen
Can you put them back in stock?
Why is Darth Vader's helmet so rough? 'Coz he skipped sanding.
Nice work man, really inspirational!
Can you make a Horn Company paint job (lime green markings with yellow insignias)?
what size is the arc trooper helmet? and when will it be back in stock
hey, just wanted to say, great job on this video.
Wish you sold them completely painted and assembled as well.
How much would you pay for a completely finished one though?
Soooooo you plan on doing a Rex helmet? Would be dope
+Big Baby Props the helmet looks amazing! In a future video can you do the commander cody helmet?
That's next in line!
Should put a pair of binoculars into the ones on the helmet and put some holes in it
Can you make Boomer or ARF 501st Helmet ?
How did you attach the black visor to the helmet?
Opa! Amazing as always, you’re the reason I got into this stuff but I’m curious. Who’s your favorite clone? (Tup Best Clone)
Loved the intro!
Need to get one!!! However I have a big head, and getting a helmet to fit can be a pain.
Your amazing bro love ur work
What are the dimensions of the 3d printer that you use?
Finally bought one
Do I need to do the filler primer step if my helmet is already pretty smooth. I understand i need to use some form of primer, but will i need filler primer. (the helmet is a resin cast)
Probably not, no
What is the circumference of the bottom of the helmet. I'm wanting to buy a helmet but I'm worried about if it will be to small
Do you by any chance have macro binoculars for the phase 1 helmet? On your site
This is cool af
Actually. In the films involving commander bly, especially revenge of the sith, he does not have that brown paint on his helmet chin. Look closely at the bottom of his helmet before he kills Aayla Secura
Bly is best✌🏻💪🏻
are the pieces painted and sanded because I want to get one of those
I don't have any paint or sand paper or a 3d printer
When are you restocking the parts for this ?!
Hey Boo!!!! How much filament do you need for a helmet?
thanks
i've been thinking of adding a similar visor to one of my own helmets, but one thing i'm wondering is if there's room inside it that you could fit a small pair of actual binoculars into it?
Yeah get small binoculars and just chop them up
Is the recommended 3d printer you have in the description big enough to print a helmet and the phase 2 armor you did in a different playlist
be surprised, I like your designs and the question do you sell them? I want to buy one
He sells the designs on his website
You should do a regular phase 2 helmet
loved the intro
Which paint you are using in general for your helmets?
Hi I was wondering if anyone knows of a place you can purchase molds for such things like character eyes or noses for characters?
thanks so much,
Does it print as one or I separate pieces that you put together
i found you guys on etsy.... id like to talk more about purchasing your work.
Sure, feel free to send me a message on etsy!
@@GalacticArmory yeah, thats the thing. i tried but for some silly reason (on my end) my e mails not going through... ill figure it out. eventually
Is there a helmet with an adjustable antennae or what ever the thing on the side of the helmet is called I forgot
Super dope 👌
How large of a base for the 3d printer do u need for the files?
What did you use for padding on the inside
just thought, how did you use the mouse sander in the crevices? like in the cheeks
Do you no longer sell the helmet on your Etsy
Can you make a Capt Rex helmet? Phase 2 helmet with the phase 1 visor.
Awesome 😍
Chancellor: commander bly the time has come,execute order 66. commander bly: yes my lord. commander bly: blast aayla secura!
What link sends you to the ones that you can buy that he's 3d printed? I can only find the files on the stores.
Edit:nvm I found them and it says that its sold out.
You should try to make Captain Fordo,
How about a Fordo (also Bacara) helmet? Where would someone find stl files for that?
ok im confused do i buy the printing files to make it or do i buy already printed pieces on your etsy page, cause im confused
Is there a certain 3D printer plastic that you used?
Do a jet trooper next
When you are done, why do you not put a coat of matte acrylic over it?
Not usually, no. I like the matte effect more than gloss.
What printer do you use, because I'm planning on getting one.
Does the visor work on the phase one helmets?
How much for a custom helmet? Is it possible to create a Phase 3 Clone/Stormtrooper helmet from the PS2/Wii The Force Unleashed? I really want a Triton Squad helmet. Would pay $200 for one.
Which material did u use for the 3d printer?