Lore wise the havoc troopers could go toe too toe with sith as seen in the cinematicatic. In the universe of the old republic they could literly box against a wookie to get stronger
@@concordsabre5723 yeah they did it would probably take the combined abilities or rex,cody'five,echo,jesse,waxer, and boil to get one if these guys to go down
As I have said a hundred times already, I find it very very impressive what you do there and that you quit your job to do this full time shows that you really are wholeheartedly involved. Carry on so we are always behind you!
Idk if you get told enough, but your a great person! Making all the part and pieces available rather than just being like if you don’t have a 3D printer than that’s too bad
Wish you the best! And congrats from leaving your job! I know it sounds counterintuitive, but I wish I could quit to follow my dream job! :) "We shall follow your career with great interest"
I love watching your builds, they always look great, and you're so informative on how to prep! Currently printing one of your Phase 2 Animated Clone Trooper Helmets, going to paint it 332nd style. Then I'll buy your Phase 2 Animated Clone Trooper Armour files (I'm the one who asked if it's possible to have the knee and elbow armour seperated!) Congratulations on starting your own business, too!
I love these videos! I have a part of a FO Stormtrooper helmet laying around that I haven't gotten around to finishing. I don't really feel comfortable setting up a super long print as I'm still worried it'll fail. I've only had my printer for a couple weeks by now. I do wish I hadn't printed it in smaller parts but at the same time like I said I don't want to do several 40-hour prints and stuff.
would love to see that in a full suit,,,, the orange shoulder board would look awesome in tactically in control ect.. like in episode 4.. 1st time you see him.. MOVE ALONG-MOVE ALONG.....That guy
I have made four helmets now and tried a bunch of different methods to smooth the parts, I used wood filler on my last one instead of bondo and it worked really well!
Yoooooo! Congrats on becoming a full time content creator! And good luck! Not that you’re going to need it, it’s hard to foresee a future where your incredible content doesn’t succeed. But still, good luck.
yes, havoc squad! the special forces of the old republic. people mistake these guys as the regular republic troopers, but the regular ones usually have orange markings
Hi, I just wanted to leave you a little thank you, I have wanted a clone armor for forever. and thanks to your channel and your files I am on my journey to one. I had my doubt cause I wanted to make rex, but I saw yesterday the new files. I'm hoping ill get approved since this is the first time I do something like this. So yea Thank You
I would love to have a full set of clone trooper armor or Old Republic Havok Trooper armor! This would be the coolest thing in the world to have. I just don’t have the skill or money to complete these projects.
Hey I watched your 501st video and noticed your awesome Kama! I'm making a Rex cosplay out of EVA foam and I was wondering how you made your kama, especially with the red outline since rex's has a blue one.
I was wondering if you’re planing on doing a season 3 animated Arc Trooper helmet? I want to get into the 501st as Arc Trooper Fives, but the Clone Wars arc troopers in season 3 have the more animated style visor, and the fin is like the animated phase 1.
6:26 Does this mean you would consider going into other franchises? I haven't seen many DIY Halo helmets available. Maybe you could tap into that market? There are tons of helmets in Halo Reach. And I'd love to see a regular marine's helmet too. Good luck!
just purchased this file and stating it today are you going to make a commander bacara stl. available to buy? keep it up and you are an inspiration by following a dream.
The real reason the old republic troopers look so similar to clone troopers despite the inspiration of the clone armor being the mandalorian armor of Jango Fett, it was an oversight on the production teams end.
Yes thank you for making this but just asking with your custom orders are they 3d printer blue prints or do you actually do it yourself and send them in
In your videos you always mention that it takes hours for the Bondo to fully cure so what if you wait an hour or so then get a 1000-2000 grit piece of sandpaper and lightly go over the helmet to smooth out the bondo before it drys? Or something like that to reduce what you have to sand?
Hey guys. Great video Bru. I'm gonna buy my first 3d printer but the one recommended is not available. I'm looking to do those kind of big piece and figurines. Got any suggestion? Ty
Lore wise the havoc troopers could go toe too toe with sith as seen in the cinematicatic. In the universe of the old republic they could literly box against a wookie to get stronger
They put clone troopers to shame!
@@concordsabre5723 yeah they did it would probably take the combined abilities or rex,cody'five,echo,jesse,waxer, and boil to get one if these guys to go down
The_CoolGamer that’s because legends doesn’t take into account existing lore
@@zachaboy , don't forget. They can also do that to Sith.
@@arranroberts1463 legends existed before the Disney era so it does actaully use existing lore because it was George Lucas original concepts
The helmet of the mando that help attack the jedi temple looks cool would be pretty neat to see him make that
Great idea!
Shae Visla. I agree great idea
Definitly!
@@GalacticArmory PLEASE DO THAT
Do it!!!
congrats on doing this as a full time gig! love your stuff, I'm working on a Captain Rex from your files right now.
Will you do a clone commando helmet?
Oh yes ! That would be sooo cool !
He already did, look on his website
@@ChrisRoberts01 he means for a video
Will he does a Jesse helmet from clone wars 7.
Hopefully yes
As I have said a hundred times already, I find it very very impressive what you do there and that you quit your job to do this full time shows that you really are wholeheartedly involved. Carry on so we are always behind you!
Man I always did love the old republic the helmet looks great!
Putting your recommended 3D printer, filament, and other materials in the description is a legendary move. Thank you!
Idk if you get told enough, but your a great person! Making all the part and pieces available rather than just being like if you don’t have a 3D printer than that’s too bad
You did it again. Absolutely amazing video! Thanks for sharing your prop making experience with us!
Wish you the best! And congrats from leaving your job! I know it sounds counterintuitive, but I wish I could quit to follow my dream job! :)
"We shall follow your career with great interest"
THE KING IS BACK WITH ANOTHER ABSOLUTE BANGER OF A VIDEO! LOVE IT
I love watching your builds, they always look great, and you're so informative on how to prep! Currently printing one of your Phase 2 Animated Clone Trooper Helmets, going to paint it 332nd style. Then I'll buy your Phase 2 Animated Clone Trooper Armour files (I'm the one who asked if it's possible to have the knee and elbow armour seperated!) Congratulations on starting your own business, too!
I love these videos! I have a part of a FO Stormtrooper helmet laying around that I haven't gotten around to finishing. I don't really feel comfortable setting up a super long print as I'm still worried it'll fail. I've only had my printer for a couple weeks by now. I do wish I hadn't printed it in smaller parts but at the same time like I said I don't want to do several 40-hour prints and stuff.
I watched you dropping the visor 15 times and didn’t even flinch
Just bought your ROTS clone armor files two days ago and I'm loving the parts I've printed so far!
We support you man! Way to go taking that step. We got your back.
Damn I clicked so fast when I got the notification.
would love to see that in a full suit,,,, the orange shoulder board would look awesome in tactically in control ect.. like in episode 4.. 1st time you see him.. MOVE ALONG-MOVE ALONG.....That guy
I have made four helmets now and tried a bunch of different methods to smooth the parts, I used wood filler on my last one instead of bondo and it worked really well!
Yoooooo! Congrats on becoming a full time content creator! And good luck! Not that you’re going to need it, it’s hard to foresee a future where your incredible content doesn’t succeed. But still, good luck.
I feel like TOR doesnt get as much love as it needs. Probably my favorite trooper armor is the Havoc trooper.
I was mad when I heard they were making a sequel trilogy, butttttttttttttt...
*EPISODE 0.1, REVENGE OF THE REVAN*
The fact the the Havoc troopers have no problem rushing into an army of Sith Warriors
I LOVED the old Republic online RPG. One of the best games ever!!!
Is the game still alive ?
@@thilensavignon1999 it might be, I haven't played it for like, 3 or 4 years.
After watching your videos I went and tried spot puddy and it makes the biggest difference in my mando helmet I printed.
Great looking helmet. I really like the visor on this one. You can use rubber cement instead of liquid latex as a cheaper and more available option.
I just finished my first clone helmet( commander gree ) thank you for the inspiration
yes, havoc squad! the special forces of the old republic. people mistake these guys as the regular republic troopers, but the regular ones usually have orange markings
This is the coolest custom prop i have seen
I love this channel so much
Building this right now. Great design!
You're a big inspiration for me to not slack during the first semester of middle school so i can get a 3D printer to make helmets of my own
You never cease to inspire and amaze me ngl
Hi, I just wanted to leave you a little thank you, I have wanted a clone armor for forever. and thanks to your channel and your files I am on my journey to one. I had my doubt cause I wanted to make rex, but I saw yesterday the new files. I'm hoping ill get approved since this is the first time I do something like this. So yea Thank You
Thank you for the kind words!
Definitely one of the most underrated helmets in star wars, gives me clone commando vibes
11:32 Did anyone see the helmet of mando? It's one the top right shelf with another unfinished helmet.
I would love to have a full set of clone trooper armor or Old Republic Havok Trooper armor! This would be the coolest thing in the world to have. I just don’t have the skill or money to complete these projects.
Looks fantastic, would be so cool to see the full set of armor
You should make a Phase 1.5 ARC Trooper, I haven't seen them be made anywhere else and they're my favorite helmet!
Hey, I’ve always loved your helmets... but your missing a big one! The Stormtrooper! I’d love to see one!
Would love to see this with green markings instead of orange! Awesome work! Maybe regular old republic trooper helmet next?
Man old republic troopers were so cool looking
Congratulations on doing this full time I love your helmets
You’re patreon rewards are actually really cool like helmet downloads whoop
So are we gonna get 3d files for the armor as well at some point? Or do you have existing armor plans already that work?
I would love to see another video with your Coruscant guard officer armor
Will you do the Havoc squad battle armour?
Great work! I love the design of the havoc troopers. Loved the video!
Hey I watched your 501st video and noticed your awesome Kama! I'm making a Rex cosplay out of EVA foam and I was wondering how you made your kama, especially with the red outline since rex's has a blue one.
Very nice work ! Enjoying your work
Could you do a video on different 3D print finishing methods? I notice that you slightly change it every time. Thanks!
Loved the video! Keep up the great work!
Thanks so much!
I was wondering if you’re planing on doing a season 3 animated Arc Trooper helmet? I want to get into the 501st as Arc Trooper Fives, but the Clone Wars arc troopers in season 3 have the more animated style visor, and the fin is like the animated phase 1.
Eventually yes!
Galactic Armory Awesome!
Love this helmet
Idk if this would be too much work since you're already making vids, but I feel like if you did commissions that would bring in some good extra dough
6:26 Does this mean you would consider going into other franchises? I haven't seen many DIY Halo helmets available. Maybe you could tap into that market? There are tons of helmets in Halo Reach. And I'd love to see a regular marine's helmet too. Good luck!
I would LOVE to do some Halo stuff!
@@GalacticArmory Hey thanks for replying! That's something I can look forward to seeing in the future then :D
Can’t wait to watch this!
Absolutely beautiful
I want to make a full set of this armor now!
You should try and making a Phase 2 captain red helmet by printing a p1 and a p2 helmet and then cutting them up
@Galactic Armory about how much filament does it take you to make a full helmet? And awesome video the helmet looks amazing!! Keep up the great work!!
Great Job! I loved this game so much.
What ways should the helmet be sliced to fit nicely onto a 220 x 220 x 250 mm build space without having lines in obvious places?
Can you or have you made a standard storm trooper helmet? I know it’s probably boring, but I love them. Great video once again!
This is just too awesome! You good Sir are a Master now ^^
Will you be making the full armor?? Would love to get this.
Any chance you would do the jedi or Sith armor from the old republic games?
just purchased this file and stating it today
are you going to make a commander bacara stl. available to buy?
keep it up and you are an inspiration by following a dream.
The real reason the old republic troopers look so similar to clone troopers despite the inspiration of the clone armor being the mandalorian armor of Jango Fett, it was an oversight on the production teams end.
Yes thank you for making this but just asking with your custom orders are they 3d printer blue prints or do you actually do it yourself and send them in
I'd love to see the clone engineer helmet from the old Bf2 game!
Hei Galactic Armory, are you using hexagons for your infill, hexagons 120 degree corners are powerful
Hi! I'm a big Star wars fan!!! Everything you do is really cool! Can I buy a collapsible helmet, and I have already painted and glued it myself?
Not proud to say when he dropped the visor I cried
Very good work but why orange ,in the cinematic their helmets are red no ?
I think you should also try the SCUBA trooper from Clone wars
In your videos you always mention that it takes hours for the Bondo to fully cure so what if you wait an hour or so then get a 1000-2000 grit piece of sandpaper and lightly go over the helmet to smooth out the bondo before it drys? Or something like that to reduce what you have to sand?
You really don't want to sand the bondo before it cures unfortunately, it will roll up and be really tacky if you try to sand it early.
Can we see an ATRT driver I know you do a lot of clone wars but those files would be unreal
i would love to see a full set of armour from the old rebpublic.
Hey guys. Great video Bru. I'm gonna buy my first 3d printer but the one recommended is not available. I'm looking to do those kind of big piece and figurines. Got any suggestion? Ty
Can you do the armorer helmet from print to finish?
I recently came across your video of PLA vs. PETG, how has PETG been working for you in tests?
Pls can you make a tutorial for the DC-15A blaster
Super dope looks like the clone commandos super Nice helmet
Would you recommend both bondo and filler primer or can I just use 2 or 3 filler primer layers instead?
What sort of padding do you do on the inside so it’s comfortable? Or do you even do that?
will you be doing the old republic havoc trooper armor?
What size print bed is needed? I want to buy a few helmets, but I have a Mega-S. Only got about 8" cubed
You should do a full helmet collection vid
You're outstanding my man
Can you please explain how to taint the visor?
This is soooo beautiful!!!
You should model the full Havoc Trooper armor. There aren’t any cosplays or videos about the Old Republic Troopers
Can you do either the Maul-dalorian helmet, or the Combat Assault Tank Trooper helmet.
I'd really like to go a S7 Gar Saxon!
@@GalacticArmory Definately one of the better versions.
Can you make a clone commander helmet? Would be very nice
Is it possible to cut the helmet into even smaller pieces if you dont have a really big printbed?
Since you’re doing a classic BF2 501st jet trooper, you should try a modern BF2/Clone Wars jet trooper!
I wish you made armor files. I LOVE the old republic but I can’t find any armor that would go with the helmet
Is there a way to make the helmets more stable?
Define "stable".
Do you mean when put together?
When worn?
Something else?
Hey will you make an old republic sith trooper helmet?