Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
Thank you for the support Steven, it is well appreciated, check out my website for more great car repair/maintenance info, and let me know what you think. www.vehiclemaintenanceandrepairs.com/
Hi Garry, it's crazy to think that those tiny bearings makes the car roll and move. I remember as a kid changing my skateboard bearings and what a big difference it made. You actually had the bearing around your finger , and the car moves on it, lol.
Definitely All Joy, it is a marvel of technology, thanks for the support, check out my website and let me know what you think, your opinion will be held in high regard. www.vehiclemaintenanceandrepairs.com/
Thank you Siphumele, for supporting my channel, please subscribe if you have not already and press the bell icon to receive all of my latest videos when it is release, it is free, I try my best to provide useful info, check out my website for more useful info too, let me know what you think, I highly regard your opinion. www.vehiclemaintenanceandrepairs.com/
When one comes in I will. Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
Hi Garry. Very informative videos. I have a mazda ruster 160i bakkie. when cold it struggle to start but once it started no problem. Lately it idle fine but wouldn`t rev up. Any advice?
Hi Gary thanks for the great video. Is there any torque specifications for the lock nut ? ,, I tried this before and bearings didn't last very long as I was told they were over tightened
This is what I normally do Turn the nut against the washer, torque 35nm, loosen the nut completely, then turn against the washer, torque 15nm, and lock the nut with a chisel.
Hi Dean here just want to know i have ford bantam 1998 b6 type i saw that i have a marking on my distrubetor and there is a marking on my head should these two markings be in line with each other because i am getting a pingin from my engine everytime i accelerate regards Dean
Usually, these markings are made by someone working on the car for reference timing especially when the distributor or related components are removed or replaced and are not usually made in the factory, if your vehicle is making a pinging sound it may be that the timing is over advanced, try retarding the timing slightly and see the results.
It sounds like it may be flooding (getting too much fuel) therefore non starting because it is fouling up the plugs, remove the plugs, if wet then this is the case. You need to either replace the needle and seat or re-adjust the float level.
@@vehiclemaintenanceandrepai3790 thanx a lot , Oom Gary first step then the next. Maybe these processes will help solve this accelaration hesitation too🥺
@@MazandiDumapi It should be level, not too high up against the top of the carb when you are holding it upside down, also take the float off and remove the needle to make sure there is no dirt stuck in it.
Thanks, CJ, for your support, I do not have an open workshop, but you are welcome to contact me on 072 486 7810, I am located in Cape Town, check out my website and let me know what you think, there is a contact page with all my info. www.vehiclemaintenanceandrepairs.com/
Thank you Sir. Just live the way you explain in detail
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
I learn a lot from your videos.
A very good teacher 💪💪
Thank you for the support Steven, it is well appreciated, check out my website for more great car repair/maintenance info, and let me know what you think.
www.vehiclemaintenanceandrepairs.com/
Thank you south african sir, this helped me replace one🎉 on our own mazda 323
Great I am glad the video was helpful, Thanks for your support it really helps me build the channel.
Thanks so much sir your vedios are straight forward
Thanks for your compliment and support.
Much appreciated watching your videos help me alot and save money
I am glad you found value in\my videos, Raylene, the intention is to help where I can, thanks for the support.
Hi Garry, it's crazy to think that those tiny bearings makes the car roll and move. I remember as a kid changing my skateboard bearings and what a big difference it made. You actually had the bearing around your finger , and the car moves on it, lol.
Definitely All Joy, it is a marvel of technology, thanks for the support, check out my website and let me know what you think, your opinion will be held in high regard.
www.vehiclemaintenanceandrepairs.com/
Thank you for this video so much , give a man a fish and feed him for a day, teach a man to fish feed him for life , thank you so much 🙏
That is the idea here at VM@R.com, Cade, thanks for visiting, and your insights it is much appreciated.
Thanks for the advice very good gentle advice 👍
It is always a pleasure, Warnick, thanks for supporting my channel with your visit.
You explained it perfectly thank you
What an informative video👌🏾
Thank you Siphumele, for supporting my channel, please subscribe if you have not already and press the bell icon to receive all of my latest videos when it is release, it is free, I try my best to provide useful info, check out my website for more useful info too, let me know what you think, I highly regard your opinion.
www.vehiclemaintenanceandrepairs.com/
What a great video pls do a steering rack next time lol
When one comes in I will.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Great video thank you
Glad you like it Janetta and thanks for the support.
Hi Sir great video thanks very much, I have same car rear bearings are a nightmare they worn out quickly I changed stapexels but still,please help
You have to buy good quality brand, such as FAG, TIMKEN or SKF
Can a stub axle be reconditioned if the bearing struggle to come out?
Not really Lucky, best and cheaper to get another even if it is a good second-hand unit.
Hi Garry. Very informative videos. I have a mazda ruster 160i bakkie. when cold it struggle to start but once it started no problem. Lately it idle fine but wouldn`t rev up. Any advice?
It sounds like the cold start unit is acting up, it may need a little adjustment.
Bakgat video, ou bul. Nou weet ek ook hoe om die voorste bearings te vervang volgens jou ander video. Keep up the good work, and thanks for the info.
A pleasure, thanks for supporting my channel with your visit.
Hi Gary thanks for the great video. Is there any torque specifications for the lock nut ? ,, I tried this before and bearings didn't last very long as I was told they were over tightened
This is what I normally do
Turn the nut against the washer, torque 35nm, loosen the nut completely, then turn against the washer, torque 15nm, and lock the nut with a chisel.
much appreciated thank you @@vehiclemaintenanceandrepai3790
A Pleasure
Great job, can you do one where you show us how to change both the inner cv joint and outer
Will do Kay, thanks for the support meanwhile.
How much would you charge for the same service on the same type of car?
Oom where can I get 4/114 steelies for a Mazda 323?
Hi Dean here just want to know i have ford bantam 1998 b6 type i saw that i have a marking on my distrubetor and there is a marking on my head should these two markings be in line with each other because i am getting a pingin from my engine everytime i accelerate regards Dean
Usually, these markings are made by someone working on the car for reference timing especially when the distributor or related components are removed or replaced and are not usually made in the factory, if your vehicle is making a pinging sound it may be that the timing is over advanced, try retarding the timing slightly and see the results.
Hi, those with ears will listen...😅 Dear sir van you give some advice about carburetor bursting a puff of smoke and refusing to start😢
It sounds like it may be flooding (getting too much fuel) therefore non starting because it is fouling up the plugs, remove the plugs, if wet then this is the case.
You need to either replace the needle and seat or re-adjust the float level.
@@vehiclemaintenanceandrepai3790 thanx a lot , Oom Gary first step then the next. Maybe these processes will help solve this accelaration hesitation too🥺
Hi Mr.G , I'm looking at the float and needle seat. How should it be positioned?🤷
Also cleaned the plugs cos they were fouled (black)
@@MazandiDumapi It should be level, not too high up against the top of the carb when you are holding it upside down, also take the float off and remove the needle to make sure there is no dirt stuck in it.
Nice videos,I like it
But can we also make use of your service,where are your contact details??
Thanks, CJ, for your support, I do not have an open workshop, but you are welcome to contact me on 072 486 7810, I am located in Cape Town, check out my website and let me know what you think, there is a contact page with all my info.
www.vehiclemaintenanceandrepairs.com/