Retroford Tech Guide Ep.4: Zetec RWD Parts Explained
Вставка
- Опубліковано 20 тра 2024
- A brief video showing some of the parts needed to get a Zetec in your MK1/MK2 Escort.
Like us over on Facebook: / retrofordltd
And on Instagram: / retrofordlt. .
Check out our website: www.retroford.co.uk/ - Авто та транспорт
This was the most helpful video on any escort engine swap ive ever seen. Bravo!
We are half way through putting focus st170 into MK1 fiesta and my son has just invested in a mk2 escort (more door),
Great info from all your videos 👍🏻👍🏻
Beautiful work lads ! 👍
How are the bellhousing bolts in the two piece sump handled? Are they just not used?
Great kit but i struggled to wire up the alternator as couldn't understand their wire diagram even as an electrician lol could do with a nice video that would help alot. thanks 😁
Do your flywheels work with the transit mk3 MT75 clutch setup?
I am considering a st 170 swop in to my sierra p100, will you be doing a sierra swop video at some point?
great videos!
will you be doing the same with the 2.0 duratec
Yes we will be doing a duratec video alongside all the separate individual product videos
Hi Thankyou for these great videos they are very useful,wanted to ask can I use these kits to fit a 2.0 lt blacktop in a mk1 granada...thankyou
Yes all of the components mentioned in the video apart from the engine mounts could be used to fit a Zetec engine in a MK1 Granada. We have a set of DIY Zetec engine mounts that you could use for your application, please see a link to these on our website:
www.retroford.co.uk/product/zetec-diy-engine-mounts-z006/
@@Retrofordltd thankyou for your reply will contact you guys soon
Could this kit work for a ford capri MK3?
Hello, do you sell the complete engine assembled with all the accessories attached?
How much is a new engine? I'm in Australia but UK price idea is fine.
Why don't you have exhaust kits and other zetec accessories for the mk1 taunus/mk3 Cortina
Great idea can I ask if you can fit a cosworth 4x4 sump to it.
Hi Jason, no not that we are aware of but someone may have modified one to fit a Zetec. Not something we have come across though. 👍
hi, can i use flywheel and clutch from a 1.8L silvertop on a 2L blacktop with a type9 box? Thanks:)
If the 1.8L Silver Top is already set up and being used in a RWD application with no issues then yes the same Clutch and Flywheel would be suitable to use on 2.0L Black Top engine in the same set up 👍
will you be doing something similar to this on the 2.0 Duratec?
Yes we will be doing a duratec video alongside all the separate individual product videos
Como consigo esses acessórios..
Would a zetec in a p100 be a waste of time ???
Also what’s the difference in Bhp between 1.8 & 2.0 ta
It would be approximately 20BHP on standard engines 👍
Is that an 1.8 or 2.0 cheers
Hi Neal the engine in this video is a 2.0L Black top