As someone who’s been failing to teach themself woodwork for three years, I love your stuff. It’s great to see a fellow Englishman in a normal sized space , with accessible tools . Admittedly none of my work actually makes it past the bin. That said I think much of my issue is I’m I’m always in a rush and want to finish everything in the odd hour I have in the garage ..😅 Starting again from scratch now and will be watching all your vids as well as Peter Millard’s . Keep up the great work
Hi Dean, I love the way you embrace “mistakes”. A great lesson for all. As someone much wiser than myself once said, “If you can’t make mistakes, you can’t make anything “ Cheers 🍻
Thanks for all the videos and information. Like yourself I've been fighting disability for many years and it's good to find similar attitudes being publicised. I started my own wood journey over 40 years ago when the woodwork room was the only one I could access at school. It's amazing the mental attitudes making stuff in wood creates in me and others. Have fun!
That's a cracking job, Dean - love all sorts of woodwork videos, but particularly yours, as you're working to a more realistic budget for the average bloke in the UK but don't let that restrict you from getting things done.
@@WoodworkJourney, I bet. Mine has a terrible fence (although the idiot using it doesn't help), but it was cheap, so a track saw, when I can afford it, is definitely an option.
Great project Dean! Those MFT holes came out pretty good! Hope you'll get to use the system often and make some nice projects to share here on UA-cam. Maybe instead of having the mdf spoil board strip being loose, make an extra cut with the router so you end up with an absolutely straight and paralel groove and then just cut a wider spoil board that fits perfectly?
That would be a good idea if I hadn’t wasted the thinner MDF I had LOL It doesn’t have to be perfect to work though so I’ll leave it as is and get to work with it first 😁
Really enjoyed your video! Absolutely love your attitude about routing the sacrificial strip!! Refreshing to see mistakes; "jealous" of the way you laughed it off. You've got a new subscriber in me. Cheers from the U.S.
When I made my workbench, I used a drill jig (Milescraft Drill Mate) to drill a hole through a block of maple - the jig allows one to drill holes at angles up to 45degrees. I drilled the hole in the maple and then clamped the maple over the spot where I wanted each bench dog hole. It worked. However, while the Milescraft Drill Mate takes some getting used to, it is functional - but not ideal. A better solution is something that will soon be coming to market. I invested in a project on Kickstarter called Bullseye Bore, which uses an attachment with lasers that cast concentric circles onto the work surface, so one can drill holes at 90 degrees to any surface, at any angle (horizontally or vertically) so it is better than a drill press for a lot of jobs. They aren't inexpensive, but to me, it is an investment that will pay for itself in time saving - no more having to set up blocks or other devices to try to figure out if I'm drilling straight through - just attach it to the drill and make sure the circles line up as required. I live in Canada, and they are in the US - and they have not yet shipped their first production run, but that should happen within a month or two, and the product looks like a serious game changer/time saver. Cheers!
Great video Dean, just on the same journey myself. One idea I had for anyone boring the holes is you can use a workmate top as a guide if you have one to hand. Perhaps a 20mm bushing is the answer???
Given your talent with the 3D printer, I wonder if it’s possible to print a router template for the MFT holes and produce the holes in the MDF using a bearing guided bit with the template? It would probably only need a maximum of 3 holes on the jig, then use the first few holes to position the next lot and so on.
That’s absolutely doable. I think there are a number available on Printables or Thingiverse already. I’d probably have to make my own from scratch or adapt another to accommodate my 100mm spacing
Hi That was a great DIY MFT build with lots of tips and I loved the video. Just found your channel and worthy of a subscription. I will check out more of your videos and I look forward to the next one. Regards James One Handed Maker - Australia
Hi Dean good job mate, I was watching Dave Stanton he was using his track locks and I've seen Peter at 10 workshop. There is the new Brit workshop Peter Parfit I think he made and designed the Parf-dog MFT and Peter mentioned the 3 4 5 system. I hope your Parf top come up ok for you.,great video take care see you soon👍
Just a thought - You have a drill press and can bore totally vertical holes. Boring a 2" deep hole in a piece of scrap makes a guide for boring the MFT holes especially with the type of hole boring 'drill'(?) you are using. Yes it will wear in time depending on the hardness of the scrap but at no cost for extra tooling even if it took half a dozen to make the table it's pretty cost and time effective. Great video BTW.
Hi again. That's not needed. It would work the same as the drilling guides but as your 20mm drill has a lead screw it would be easier to locate. Drill the scrap at 90 degrees and then slide on to the drill. Pushing the drill through by a couple of inches allows the lead screw to be located exactly at the point needed. Making sure not to delocate the drill slide the guide down until it is flat on the board. If you need extra help with location punch a starter hole in the board that will stop most movement. I am disabled myself and naturally think laterally and have spent many years getting around inability and cost problems. It should work I've always had to use a variation of the process on drill guides anyway the little lines never seem to give the right result. I hope that is a bit clearer and it works for you. BTW Peter Millard uses a cotton reel for smaller sizes....... @@WoodworkJourney
The problem I had with the MFT self-build was that d you have to be very careful to line the centre of the 20 mm drill bit up with the centre of the 5/6 mm pilot holes. Also, 20 mm drills don't always drill a 20mm hole - the holes I had came out a bit undersize and I had to open them up manually to get the bench dogs to fit (as they are accurately sized). I did try and use the type of drill bit you showed but found it was far too aggressive and very difficult to control, owing to to the tapered threaded part at the tip of the drill bit
It's all starting to really take shape Dean. Look out for a drill guide from Rutlands, they come up every now and then on special. I got mine for about £40 and it's bang on.
Funnily enough I was discussing that exact thing with my Dad recently lol Unlikely to be something I’ll be buying though, it just wouldn’t get a whole lot of use
The MFT table is looking really good Dean! :) Tip - don't use double sided tape to hold the spoil board down. You will have a bit of a battle removing it once it's been there a while. Instead go for the super glue and masking tape trick. There a some vids about it including one from Crimson Custom Guitars. I use it all the time and it holds things down very firmly but also comes off quite easily and doesn't leave tons of residue to clean off.
Hahahahahaaaaa, yeah. I can totally see that happening to you 🤣 But if you off set it so it sits clear of the cutty slicey bitz you should be good to go. Rather than the tape and CA glue method, use the rubber adhesive double sided tape. Works much better than tape and glue and is easy to remove.
the dog hole v micro jig has also been done by PeterMillard with some interesting results. i agree with your 100mm centres £200 for a setup guide to drill out the holes is incredible. OZnest are great for extrusions well done for the plug for them
Hi Dean, I happened across your channel and love your content. I too am new to the world of workshop carpentry so just starting on my journey. I have a couple of suggestions, and a question. Firstly, where did your apron come from? I hate leaving stuff on my bench and can never find it again abdvthinkbthis could be a perfect solution. My thought on the dog holes, could you have used a wider bit of stick and drilled 20mm holes at 100mm centres, then used a guided router bit to make the holes? Would then be square. For the sacrificial dado, perhaps running the plunge saw to create the straight edge, then a router bit to remove the waste would have given best results. I like the modular setup if your bench and might look at something similar in my own build. Keep up the great content 👍
The apron was from Amazon, think I made a video about it with a link to the right one a while ago. As for the strip, absolutely, someone else mentioned that and I can’t believe I didn’t think of it! I’m really glad you’re enjoying the channel
That's a neat jig and pretty clever to use the straw as bushings. On a side note I 3D printed some insert/caps for my MFT. They just stop things falling through because my MFT is also a work bench.
Maybe make a drill guide template from a thick board with one series of holes that run the length of the mct table, and spaced out according to the pattern. Do this carefully on the drill press os uhave a story board with accurate 90 deg holes. Set up so can be secured to table on either end w clamps. Then just drill each series of holes with the template securing security of accuracy.
You could have left the spoil board for a year or two and let the track saw carve a divot in the top. Then when it got too bad, router it and put the spoil board in. I really like your build.
Simple trick to drill holes that are straight is to grab a chunk of tree and drill a hole using your drill press. Then clamp it on the board and drill away. Nice straight holes every time.
Awkward just adds to the challenge. Use a length that allows for easy clamping and it becomes much more managable. Keep an eye out for the Milescraft portable drill press thingy, I picked one up from my local woodie shop for around the $50 AUD mark. Payed for itself on the first job. Cheap and cheerful but does the job like a champ.
The dog issue was never resolved as far as I know, to much of a ball-ache to figure out as theres so many difference thickness you cut, drove me nuts that set up mate! Not to mention cabinet work with a track saw is a nightmare!
You just need some guide rail spacers. You can buy some or just print your rail hooks a bit wider so the saw motor does not hit the dogs. Other brushless tracksaws like Festool or metabo have a slimmer profile and don’t need the spacer. And if you really want exact cuts, buy a cnc made mft top. It is nearly impossible to build with jigs/templates if you want to use it for accurate cuts.
I had always thought that there was no need to religiously stick to the 96 mm. grid. So long as the spacing in x and y directions are the same them the 45 degree angle is covered.
Enjoy your videos, but have wondered, if “MFT” stands for “multifunction table”, when people say “MFT table” isn’t that redundant; multifunction table table?
It is normally, but in this case I have a multi function table table because the MFT is an interchangeable part of a unit that does multiple things - it’s all very confusing
Hi Dean, looking good 😊, keep,it up. A small helper to your issue with drilling a perpendicular dog-hole. Ask me how i know… However as i started similar as you, i found the earlier videos of Peter Parfit (the later inventor of the Parf guide system) He initially used the same drill as you (and i) in his video ua-cam.com/video/rX8j-eCz5Og/v-deo.htmlsi=E5tf4D7UsNrMYh0r he shows an ingenious jig for this bit (minute 6:50) how he got the bit to get it pefectly 90 to the worktop. So long, stay healthy BR & greetings from Germany 🇩🇪 Karlheinz
Why don’t you just use the Parf system to drill the holes? Yes it costs 200€ but you buy it once. The time you sat making this that is totally not accurate for your cuts costs you way much more money. Or then just get a company to make it with CNC. So many comanies’offer’these services .with all respect this is really a waste of your time.
Looking good Dean, and thanks so much for the shout-out! 🙌 Cheers, Peter.
Getting there buddy, thank you!
As someone who’s been failing to teach themself woodwork for three years, I love your stuff.
It’s great to see a fellow Englishman in a normal sized space , with accessible tools . Admittedly none of my work actually makes it past the bin.
That said I think much of my issue is I’m I’m always in a rush and want to finish everything in the odd hour I have in the garage ..😅
Starting again from scratch now and will be watching all your vids as well as Peter Millard’s .
Keep up the great work
Thank you! And best of luck with your workshop endeavours
Great idea using the straws as drilling bushes... a much better use than originally intended
Cheers
Hi Dean, I love the way you embrace “mistakes”. A great lesson for all.
As someone much wiser than myself once said, “If you can’t make mistakes, you can’t make anything “
Cheers 🍻
Thanks Mick! I’m great at making mistakes 😂
😂😂😂 Brilliant!!!! This is my new favorite channel. ❤❤❤
Thank you
Love this because it shows exactly the problems I would hit if I went down the mft route.Thanks for the honesty much appreciated.
My pleasure
Thanks for all the videos and information. Like yourself I've been fighting disability for many years and it's good to find similar attitudes being publicised. I started my own wood journey over 40 years ago when the woodwork room was the only one I could access at school. It's amazing the mental attitudes making stuff in wood creates in me and others. Have fun!
Thank you Jonathan, keep up the good fight fella!
Great video. Bought the parf guide and had a problem. Sorry, meant I had NO problem. Love it.
Sorry to hear that
It is nice to find somebody from the UK,definitly suscribing ❤
Thank you Patrick
Your videos are inspirational and your presentation is clear and friendly! Thanks, Dean!
Very kind, thank you!
That's a cracking job, Dean - love all sorts of woodwork videos, but particularly yours, as you're working to a more realistic budget for the average bloke in the UK but don't let that restrict you from getting things done.
Thank you!
Great build, Dean, and well ppresented, too. It is making me rethink my table saw in favour of a similar set up.
The lack of tablesaw definitely makes you think about things differently
@@WoodworkJourney, I bet. Mine has a terrible fence (although the idiot using it doesn't help), but it was cheap, so a track saw, when I can afford it, is definitely an option.
Great project Dean! Those MFT holes came out pretty good! Hope you'll get to use the system often and make some nice projects to share here on UA-cam.
Maybe instead of having the mdf spoil board strip being loose, make an extra cut with the router so you end up with an absolutely straight and paralel groove and then just cut a wider spoil board that fits perfectly?
That would be a good idea if I hadn’t wasted the thinner MDF I had LOL
It doesn’t have to be perfect to work though so I’ll leave it as is and get to work with it first 😁
@@WoodworkJourney well, they are meant to be cut up and (ab)used, right, so it's no big issue if the fit is a bit off. It'll work just the same.
Really enjoyed your video! Absolutely love your attitude about routing the sacrificial strip!! Refreshing to see mistakes; "jealous" of the way you laughed it off. You've got a new subscriber in me. Cheers from the U.S.
Nice one Dean look forward to your first project video on the MFT👍
I can’t wait to get to it, there’s been so much stuff to do recently and so little time to do it!
Great idea looks good
Thanks!
Love it, Dean. 3D router mod is genius🌟
It’s definitely very helpful 😊
Thanks Dean 👍🏻😃
Thank you Fiona!
Look good Dean!
Thanks David!
When I made my workbench, I used a drill jig (Milescraft Drill Mate) to drill a hole through a block of maple - the jig allows one to drill holes at angles up to 45degrees. I drilled the hole in the maple and then clamped the maple over the spot where I wanted each bench dog hole. It worked. However, while the Milescraft Drill Mate takes some getting used to, it is functional - but not ideal. A better solution is something that will soon be coming to market. I invested in a project on Kickstarter called Bullseye Bore, which uses an attachment with lasers that cast concentric circles onto the work surface, so one can drill holes at 90 degrees to any surface, at any angle (horizontally or vertically) so it is better than a drill press for a lot of jobs. They aren't inexpensive, but to me, it is an investment that will pay for itself in time saving - no more having to set up blocks or other devices to try to figure out if I'm drilling straight through - just attach it to the drill and make sure the circles line up as required. I live in Canada, and they are in the US - and they have not yet shipped their first production run, but that should happen within a month or two, and the product looks like a serious game changer/time saver. Cheers!
Nice Job !!
Thanks!
Any Tooling takes time Dean... You are getting there .. Bob (weston super Mare)
Cheers Bob!
Great video Dean, just on the same journey myself. One idea I had for anyone boring the holes is you can use a workmate top as a guide if you have one to hand. Perhaps a 20mm bushing is the answer???
May be! I guess it depends on the spacing of the workmate ones
Given your talent with the 3D printer, I wonder if it’s possible to print a router template for the MFT holes and produce the holes in the MDF using a bearing guided bit with the template? It would probably only need a maximum of 3 holes on the jig, then use the first few holes to position the next lot and so on.
That’s absolutely doable. I think there are a number available on Printables or Thingiverse already. I’d probably have to make my own from scratch or adapt another to accommodate my 100mm spacing
Hi
That was a great DIY MFT build with lots of tips and I loved the video.
Just found your channel and worthy of a subscription.
I will check out more of your videos and I look forward to the next one.
Regards James
One Handed Maker - Australia
Thanks! I hope you enjoy the channel
Thanks for sharing... why didn't you use the router to get perfect vertical dog holes?
Hi Dean good job mate, I was watching Dave Stanton he was using his track locks and I've seen Peter at 10 workshop. There is the new Brit workshop Peter Parfit I think he made and designed the Parf-dog MFT and Peter mentioned the 3 4 5 system. I hope your Parf top come up ok for you.,great video take care see you soon👍
Cheers
Just a thought - You have a drill press and can bore totally vertical holes. Boring a 2" deep hole in a piece of scrap makes a guide for boring the MFT holes especially with the type of hole boring 'drill'(?) you are using. Yes it will wear in time depending on the hardness of the scrap but at no cost for extra tooling even if it took half a dozen to make the table it's pretty cost and time effective. Great video BTW.
Definitely an idea, the guide would have to be flat to the table the whole time which may be awkward, but thanks for the comment! 👍
Hi again. That's not needed. It would work the same as the drilling guides but as your 20mm drill has a lead screw it would be easier to locate. Drill the scrap at 90 degrees and then slide on to the drill. Pushing the drill through by a couple of inches allows the lead screw to be located exactly at the point needed. Making sure not to delocate the drill slide the guide down until it is flat on the board. If you need extra help with location punch a starter hole in the board that will stop most movement. I am disabled myself and naturally think laterally and have spent many years getting around inability and cost problems. It should work I've always had to use a variation of the process on drill guides anyway the little lines never seem to give the right result. I hope that is a bit clearer and it works for you. BTW Peter Millard uses a cotton reel for smaller sizes....... @@WoodworkJourney
The problem I had with the MFT self-build was that d you have to be very careful to line the centre of the 20 mm drill bit up with the centre of the 5/6 mm pilot holes. Also, 20 mm drills don't always drill a 20mm hole - the holes I had came out a bit undersize and I had to open them up manually to get the bench dogs to fit (as they are accurately sized).
I did try and use the type of drill bit you showed but found it was far too aggressive and very difficult to control, owing to to the tapered threaded part at the tip of the drill bit
It's all starting to really take shape Dean. Look out for a drill guide from Rutlands, they come up every now and then on special. I got mine for about £40 and it's bang on.
Funnily enough I was discussing that exact thing with my Dad recently lol
Unlikely to be something I’ll be buying though, it just wouldn’t get a whole lot of use
@WoodworkJourney you'll be surprised. I use mine loads more than I thought I would.
To cut the rebate for the sacrificial insert, you could have used the tracksaw for the left and right edges, then the router to move the centre waist
Now that is a bloody good idea, wish I’d have done that!! I’ll render for next time
@@WoodworkJourney I 3d printed the track router guide thing as well. Looks like it ain't that great?
Peter has a DIY rail hinge.
I'm pondering how to use a random (big) router to drill holes like Peter did with his LR32 thing.
The MFT table is looking really good Dean! :)
Tip - don't use double sided tape to hold the spoil board down. You will have a bit of a battle removing it once it's been there a while. Instead go for the super glue and masking tape trick. There a some vids about it including one from Crimson Custom Guitars. I use it all the time and it holds things down very firmly but also comes off quite easily and doesn't leave tons of residue to clean off.
Good idea, I use the masking tape and glue idea quite a lot, don’t know why I didn’t think of it lol
@@WoodworkJourney Just drop a screw in one end. Jobs a goodun.
I would absolutely put the tracksaw blade through the screw Phil
Hahahahahaaaaa, yeah. I can totally see that happening to you 🤣 But if you off set it so it sits clear of the cutty slicey bitz you should be good to go. Rather than the tape and CA glue method, use the rubber adhesive double sided tape. Works much better than tape and glue and is easy to remove.
the dog hole v micro jig has also been done by PeterMillard with some interesting results. i agree with your 100mm centres £200 for a setup guide to drill out the holes is incredible. OZnest are great for extrusions well done for the plug for them
Hi Dean, I happened across your channel and love your content. I too am new to the world of workshop carpentry so just starting on my journey. I have a couple of suggestions, and a question.
Firstly, where did your apron come from? I hate leaving stuff on my bench and can never find it again abdvthinkbthis could be a perfect solution.
My thought on the dog holes, could you have used a wider bit of stick and drilled 20mm holes at 100mm centres, then used a guided router bit to make the holes? Would then be square.
For the sacrificial dado, perhaps running the plunge saw to create the straight edge, then a router bit to remove the waste would have given best results.
I like the modular setup if your bench and might look at something similar in my own build. Keep up the great content 👍
The apron was from Amazon, think I made a video about it with a link to the right one a while ago.
As for the strip, absolutely, someone else mentioned that and I can’t believe I didn’t think of it!
I’m really glad you’re enjoying the channel
Thank you.
That's a neat jig and pretty clever to use the straw as bushings.
On a side note I 3D printed some insert/caps for my MFT. They just stop things falling through because my MFT is also a work bench.
Thanks! They’re actually on my list to print myself at some point lol
Regarding your bandsaw could you make and put the saw on a turn table top ? Like a lazy Suzan
That is something I’ve thought about before. Certainly a possibility
Maybe make a drill guide template from a thick board with one series of holes that run the length of the mct table, and spaced out according to the pattern. Do this carefully on the drill press os uhave a story board with accurate 90 deg holes. Set up so can be secured to table on either end w clamps. Then just drill each series of holes with the template securing security of accuracy.
Hi will your JCB cordless router work off a Makita 18v battery as they look very similar
Absolutely no idea, there’s quite a few that look similar purely because the way tools are produced these days
You could have left the spoil board for a year or two and let the track saw carve a divot in the top. Then when it got too bad, router it and put the spoil board in. I really like your build.
Simple trick to drill holes that are straight is to grab a chunk of tree and drill a hole using your drill press. Then clamp it on the board and drill away. Nice straight holes every time.
Very true, and while not impossible it is a bit awkward in this case. It would work though
John Heinz did a useful looking drill press/drill guide
ua-cam.com/video/eAgj-nLZ5uI/v-deo.htmlsi=GxVqCGPxmvEKrFoN
Awkward just adds to the challenge. Use a length that allows for easy clamping and it becomes much more managable. Keep an eye out for the Milescraft portable drill press thingy, I picked one up from my local woodie shop for around the $50 AUD mark. Payed for itself on the first job. Cheap and cheerful but does the job like a champ.
The dog issue was never resolved as far as I know, to much of a ball-ache to figure out as theres so many difference thickness you cut, drove me nuts that set up mate! Not to mention cabinet work with a track saw is a nightmare!
I’ll be making a decent cross cut sled for the tracksaw at some point which will help a lot I think
You just need some guide rail spacers. You can buy some or just print your rail hooks a bit wider so the saw motor does not hit the dogs.
Other brushless tracksaws like Festool or metabo have a slimmer profile and don’t need the spacer.
And if you really want exact cuts, buy a cnc made mft top. It is nearly impossible to build with jigs/templates if you want to use it for accurate cuts.
Why not cut a few wider strips Dean ? Then re-cut groove to match.
No more thin mdf I’m afraid
@@WoodworkJourney ok. I understand 👍
What does MFT stand for?
Multi Function Table
@@WoodworkJourney thanks
I had always thought that there was no need to religiously stick to the 96 mm. grid. So long as the spacing in x and y directions are the same them the 45 degree angle is covered.
trend make a template for the router thats about 40 quid, its accurate and quick to use, i wish id got it before i paid for the ujk parf guide jig.
Enjoy your videos, but have wondered, if “MFT” stands for “multifunction table”, when people say “MFT table” isn’t that redundant; multifunction table table?
It is normally, but in this case I have a multi function table table because the MFT is an interchangeable part of a unit that does multiple things - it’s all very confusing
A plunge router would be good for the holes
It would indeed
should have used the track saw to cut the 2 edges of the glove.
Hi Dean,
looking good 😊, keep,it up. A small helper to your issue with drilling a perpendicular dog-hole. Ask me how i know… However as i started similar as you, i found the earlier videos of Peter Parfit (the later inventor of the Parf guide system)
He initially used the same drill as you (and i)
in his video ua-cam.com/video/rX8j-eCz5Og/v-deo.htmlsi=E5tf4D7UsNrMYh0r he shows an ingenious jig for this bit (minute 6:50) how he got the bit to get it pefectly 90 to the worktop.
So long, stay healthy
BR & greetings from Germany 🇩🇪
Karlheinz
Thanks! For the MFT I made recently I actually did a very similar thing 😁
🫡
Why don’t you just use the Parf system to drill the holes? Yes it costs 200€ but you buy it once. The time you sat making this that is totally not accurate for your cuts costs you way much more money. Or then just get a company to make it with CNC. So many comanies’offer’these services .with all respect this is really a waste of your time.
Because we don’t all have £200 to drop on something that’s potentially single use. Doing it myself worked out just fine