I added the mirrors with the blinkers to my 15 Jetta S. OEM units off an SEL and I even found my paint code! Plug and play, no coding and they look SO cool.. Oh, they were junkyard parts, not new..
@@MK6CHRIS you just unplug the connector on your plain black mirror and then plug it into the painted blinker version mirror and it works! There’s no extra wiring required...
Hey Chris, thanks so much for all the great videos on the MK 6 Jetta. I got the 1.4T and have started doing some mods to the car. Quick question.. Did you remove the insulation hood just to hear the intake and engine a bit more? What was the reasoning behind removing that?
just ordered mine today, about to order a lip & a bumper diffuser, may i ask where did you get urs ? i’m looking for something simple like the ones you got. plsss & thankyouuu
Bruhhhh you didn’t need to take the whole bumper off you can take the t25s out the 4 on the top and use a plastic tool to remove the side under the light and slowly pull it out super easy I have a 2015 tdi
That's what I thought! I tried and almost broke it a few times. Apparently mine is clipped in good to the bumper, so I had to take it off. That was easier for me.
I'm getting ready to do this on my 2016 jetta and I really want to avoid removing the bumper. Any tips? Ordered some plastic tools to get that part under the light. Still worried about trying to get the grill to pop out without the bumper. If you happen to see this I'd take any links to tools you used to get this done without the bumper. Any help at all is appreciated
@@ItsMasterMurray any typical plastic tool kit at autozone but removing the bumper on the mk6 is so easy I recommend taking the whole bumper off first look up that video I unfortunately don’t have my Jetta anymore someone totaled it by rear ending me so I switched to a civic si
@@Rareoddz any specific tools? I ordered some plastic ones to try and get it out without removing the bumper. Literally every video with the mk6 2015-2018 has the bumper removed so I'm glad to see it can be done this way
Jason R I was so concerned about that. But I actually don’t . The angle of the grille and how far the intake is back prevents the rain from getting near it
@@andrewpriola6908 hey the fog lights are actually a kit from ecstuning . It’s for those of us who don’t have them from the factory . The yellow is just some vinyl wrap . They’re normally clear
I added the mirrors with the blinkers to my 15 Jetta S. OEM units off an SEL and I even found my paint code!
Plug and play, no coding and they look SO cool..
Oh, they were junkyard parts, not new..
I’ve been wanting to do that. How did you wire them? I can’t imagine they left the wiring harness in the door
@@MK6CHRIS you just unplug the connector on your plain black mirror and then plug it into the painted blinker version mirror and it works!
There’s no extra wiring required...
instablaster...
@@lucahugh7209 what?
Great removal and swap we are watching from Las Vegas fam 👍🏽
Thank you, I really appreciate it! I have lots of car related content coming
Hell yea we gone tune I fasho fam watching from Las Vegas
very helpful, thanks
Hey Chris, thanks so much for all the great videos on the MK 6 Jetta. I got the 1.4T and have started doing some mods to the car. Quick question.. Did you remove the insulation hood just to hear the intake and engine a bit more? What was the reasoning behind removing that?
Hey ! Yes I 100% removed it to hear the intake and turbo more
just ordered mine today, about to order a lip & a bumper diffuser, may i ask where did you get urs ? i’m looking for something simple like the ones you got. plsss & thankyouuu
Hey I got both my front grille, front lip, and rear diffuser on eBay !
@@MK6CHRIS Can you provide me the link please? I cant find them!
Beautiful
Who? You ?
MK6CHRIS 😏
okay i can't figure it out.. is my 2013 jetta se considered a mk6? if not, what would it fall under?
yes that is PRE facelift MK6 jetta.
Bruhhhh you didn’t need to take the whole bumper off you can take the t25s out the 4 on the top and use a plastic tool to remove the side under the light and slowly pull it out super easy I have a 2015 tdi
That's what I thought! I tried and almost broke it a few times. Apparently mine is clipped in good to the bumper, so I had to take it off. That was easier for me.
I second this I did mine yesterday just get the corners out all the way and kinda like start pulling it out and it eventually popped right out
I'm getting ready to do this on my 2016 jetta and I really want to avoid removing the bumper. Any tips? Ordered some plastic tools to get that part under the light. Still worried about trying to get the grill to pop out without the bumper. If you happen to see this I'd take any links to tools you used to get this done without the bumper. Any help at all is appreciated
@@ItsMasterMurray any typical plastic tool kit at autozone but removing the bumper on the mk6 is so easy I recommend taking the whole bumper off first look up that video I unfortunately don’t have my Jetta anymore someone totaled it by rear ending me so I switched to a civic si
@@Rareoddz any specific tools? I ordered some plastic ones to try and get it out without removing the bumper. Literally every video with the mk6 2015-2018 has the bumper removed so I'm glad to see it can be done this way
Do you have any issues with rain getting over your intake now that it's more exposed? Great video fyi!
Jason R I was so concerned about that. But I actually don’t . The angle of the grille and how far the intake is back prevents the rain from getting near it
where did you buy the german flag badge to replace "
GLI"?
found some random one a while ago on Amazon
did you notice a big difference in sound when you removed the insulation from the hood?
oh for sure! everything sounded louder
Where did you get those seat covers from
surprisingly, carID
Do the GLI and the 1.4t have the same grille? I want to buy a badgeless one but I cant find one for the 1.4 only the GLI.
If you notice, this is a GLI grille. All mk6 parts are interchangeable. Depending on pre/post facelift.
Tabarnak je suis étourdi en regardant ta vidéo j'ai mal à la tête
Sorry I only speak English
@@MK6CHRIS go google traduction
@@redadaktariari6967 Mueve mucho la camara y no da oportuidad de observar lo que hace xD
did you rlly have to take off the front bumper
No but it Makes it easier
Hi nice video.. did you get this from Ali express?? I’m looking for one but can’t. Any info where you buy I really appreciate
Hey thank you . I also got this from eBay lol
Those emblem clips are super tough you can remove it from the front
without removing the bumper right? At the time , there was too much flex. I had to take bumper off. A lot easier instead of risking it
btw that grill is not OEM
close enough
Where did you get the badge from?
Amazon
@Teed It was a while ago, I don't recall
I’m always surprised when you have to remove so many screws from a job and you use a manual ratchet!
It’s pretty easy
Where did you get the new bumper from?
new bumper? I think you mean, new grille, that was purchased off eBay.
@@MK6CHRIS yes sir sorry thanks!
@@MK6CHRIS what about the yellow fogs? I have the SE and it doesn’t have them
@@andrewpriola6908 hey the fog lights are actually a kit from ecstuning . It’s for those of us who don’t have them from the factory . The yellow is just some vinyl wrap . They’re normally clear
@@MK6CHRIS appreciate it man! Have you looked into the forge dump valve? They produce some pretty decent noise
Are you selling your old grille?
I was.... it’s sold