I came as an immigrant kid to USA, we did not have ability to buy a bike in old country. My dad got me one similar to this one also in Goodwill. I loved it! 🥲
Very lucky bike! With a bit of attention and love, this baby comes back to be part of the life of a person. 80's were plenty of BMX everywere, and of course bring me back some lovely memories. As always, nive job! Big hug!
I know I can’t be the only one here that recalls the freedom and excitement of riding BMX as a kid. I had GTs, Haros and Mongooses (Mongeese? Haha). They’d all probably be worth some nice money nowadays. Thanks for the video, your restorations are always fun to watch.
Missed you talking and the peaceful music. Great build by the way. As soon as you put the pads on i was back in the 80s awesome. Big love from the UK 🇬🇧
My first REAL Bmx back in 1986 was a Chrome GT, can't remember the model, but I do remember that it was featured in a BMX mag that year and told my dad how much I wanted, he got it for me on Christmas, it had plastic 3 blade GT rims! Thanks for bringing back the memories.
Ahh the memories, raced with my kids in the 90s. Our transportation was a Ford Festiva so three bikes ot break down and reassemble at every race. Good times.
Some restorations hit close to home. I still have my chromoly 1986 GT Mach One with upgraded Flight cranks (and Dyno number plate), so I enjoyed watching you return this 1989 to its roots. Nice work. My Mach One was raced pretty hard for four years and has been enjoying its well-earned retirement ever since.
Great to see you tackle a BMX build. I've found the WD-40 & very fine steel wool works great on removing rust from chrome too, just finished up restoring an '88 GT Performer for a high school friend that he can now ride again with his son. Lots of us out there restoring BMX along with mtn and road bikes, great to see this. Keep up the great work!
I've just had a barn find. Gt dyno and a 1978 redline frame, bars and forks.. not sure if I should restore or sell to someone who can do a better job.. from what I can see though the redline frame is quite rare. Any thoughts?
@@simonabraham415 Bikes this old were treated like how any kid treats their toys. How many expensive baseball rookie cards were shredded in the spokes of my bike when I was a kid? Personally, if you have the interest in restoring it yourself there is a plethora of information on youtube you could access. Slow and steady. But, if it's just a financial thing then list it on eBay and someone world-wide who appreciates this frame will approach you.
I will like to think you made this video because of my sugestion,..I sat down, relaxed and enjoyed..!!! Of course, you wouldn't disapoint..thank you so much.
Yes!!! This is exactly what I’ve been hoping you’d do once! Would love to see you doing some more 80s old school BMXes! Love how the colorway turned out!
My late best friend used to have a GT Pro Performer back in the mid 1980's. I was a Redline fan myself starting with the PL-20 and then switching to the RL-20II.
It amazes me how foil cleans chrome. Great job the blue tyres brings back memories of my raliegh mini burner that was all blue with those tyres. Awesome. Gotta get in gear and sort a gt performer 98 that I have to clean up like you I want to keep it's scars and make it ride well. The vintage cranks are big money.
God I love the look of 80's BMX bikes. One of my childhood friends, back in the early 90s, had this BMX with oval shaped tubing for the frame. I have no idea what it was to this day. It had no decals, and looked like it had been repainted, but it was a really nice looking bike. This video just kinda sparked that memory in my brain...
Great resto as always. Would be nice if you did a video covering all the oils/lubricants you use for each application and why. There are so many different types of lithium, ptfe etc and knowing what you recommend is best for bearings chains and so on would be a interesting video…
I remember those pedals from the days - my shins still have the marks of 'em... You should source a pair of alloy GT- cages for this bike (DX- style), that would really make it the part... great build, lovely nostalgia!
DiaCompe make repop MX-1000 and MX-890 brake calipers and DiaTech 3 and DiaTech 4 levers which aren't terribly hard to find. SE racing make some nice classic chain tensioners. They would look amazing on this bike.
Lol you had me at 89 gt. Love your videos but this one hit right up my alley being an oldschool bmx guy. And my current ride being a old school mtn bike/cruiser turn bmx. Love this one
Remembered here in Marseille/France years 1981,saw guys riding a Redline and a PK RIPPER,simply epic..next in 1985 friends have the legendary GT,Haro and Skyway ..other have Magnum too..
Awesome restoration! For future reference, you can buff and wax the decals to get them all cleaned up and shiny again. Also, wet 1500 grit sandpaper instead of a file to clean up the nuts.
I'm loving your videos. Just found you and I'm very excited. I found 2 old 90's style MTB (full suspension) sitting in the trash in my apartment complex. I picked them up and plan on rebuilding completely, and going to do a paint job too. A lot of firsts will be had on this project, but I'm hoping I've learned something from binging your vids. Keep up the awesome work, you are seriously impressive and love your video style.
That was fun and and an education to watch. I did not miss the BMX era but man the adult riders today that were all in then have some mad bike skills ;) And I love GT’s embossed top tube. I just found a 2000 Saddle Back for $20, a bit rough, but mechanically solid. Replaced all the cables, packed the bearings, and swapped to more ergonomic bars, and it is my new favorite. I thought of your channel during the hours on the stand and the wash trays.
Yeaah I remember my bmx bike its was a blue one, alphina deluxe. I was riding to school with my sony walkman on my belt playing duran duran.. these where the days when I was really happy..👍
Love the bike pal I used to have a Peugeot tear drop frame chrome with black skyway tough 2 mags and power disk crank and Mx brakes I loved that bike on the track
I’m restoring an old department store bike but when I found it, it was only frame and fork and spray painted over 3 times. I can’t find another like it so I got it powder coated and put gt performer bars and gt mallet stem remake with grip and 22mm bottom bracket so I could put 3 piece cranks. Only thing I need now is some white mag wheels but not sure where to find any. Love the build man!
8$ for a GT would never happen in Germany! always so jealous of you, You find such nice bikes for a real bargain at your thriftshop ^^ Such a nice GT :)
I was lucky enough to come across an 88 marin muirwood and an 89 kona lava dome recently, both in terrible shape. When I restore them to oem I'll be thinking of you and your awesome creativity.
I remember a GT BMX I bought at a car boot sale in UK, many years ago, it was in poorly maintained condition, the people I bought it from claimed it was used for racing.. The cranks were held on with pieces of metal in between the square taper and cranks and feel part as I was trying to ride home! I ended stripping it down and kept the frame for some years before selling it on eBay, regretted it soon after! I should have restored it when I had the money!
I still have my 1989 FreeAgent. I've ways kept it in rideable condition. It hangs on the wall in my shop now but with some air in the tires it's ready to ride. I still want to upgrade the cranks to a set of Redline Flights, I may do it one day.
AWESOME! All things taken into consideration, this is an excellent recovery of a BMX Bike Icon. Just one little thing... you could have stuck a Chromed backed GT head stock badge on it as the cherry on the cake. Your use of colour parts is brilliant... great job well done.
Great video! And what an extraordinary find 👍🏻 I like that you do not make it “mint” condition but revive it to a good looking working condition for it to be ridden again. And for me almost the best part is that you take it for a ride 💪🏻👍🏻 That is what it was ment for and not only a show piece in a mancave. Great job 💪🏻, Thanks!
Great job, sir! Looks just an 80s build, and well done on the new parts - pretty good match! Weird seeing an 80s frame with a threaded BB. I would have assumed it’d be a one-piece crank, but that black three-piece goes well.
Very cool! I had a '96 GT interceptor as a kid. My first "real" bike that I paid for myself. I kinda hate myself for letting my mom sell it for $50. At least some kid got a fantastic deal.
Love it...reminds me of my first "real" bike that taught me how to jump and bunny hop. I started MTB at around 12 yo and just kind of left BMX in the past, but I still appreciate them. I can't ride BMX anymore cause of an injury, unfortunately. I still MTB, just not the same as I used to...a lot more leisurely.
Oh! It reminds me the pending project I have restoring my brother’s BH California for his sister. It was impossible to remove the stem. And forget about to lub bearings… it was a pain in the ass to adjust the length chain… until I saw one of your videos… I love chrome frames. It would have been nice to see you removing all those scratches to learn.
Hey great video. My first bike was a GT mach one. Loved GT ever since. Looking at this build I realize I have a pair of old CQP cranks (the dogbone alloy ones) that would look great on there. If you're interested let me know. I've also been working on a GT karakoram MTB resto that I'm still in need of parts for. So might be able to work out a deal in trade. At any rate. Channel is awesome totally motivated me to get an old MTB and fix it up even though I grew up riding and still ride BMX.
very clever restoration. as a mobility impaired senior i challenge you to build a 16" 3 wheel rollator with fat tyres that are studded to negotiate bad sidewalks during winter and a frame that folds so one could board buses and trains . painted in camo od green matte finish and brakes and adjustible to fit all peoples.
A GT, for 8 dollars??? Holy cow!!! Shovel transformed it into $800👍 There is a sweet ‘83/‘84 Race Inc frame on Minneapolis CraigsList right now, redone & powder coated, going for $400. That’s just the frame!
I recognise that front chainring, it's the same as what I have on my (recently acquired) 2010 Intense Moto Expert XL . I am an old school female BMX racer (raced during '81-84 years, I started racing aged 13) I am 54 now 😁
Can never go wrong with an 80's BMX bike...they just don't make them like this anymore. Totally RAD 🔥🤙
@L P I Agree, almost all old school bikes after 87 were garbage. I have 12 bike...all pre 85!
My thrift stores NEVER have cool stuff like this!
I came as an immigrant kid to USA, we did not have ability to buy a bike in old country. My dad got me one similar to this one also in Goodwill. I loved it! 🥲
I don't even know what this bike is but this is surely one of your best videos. SO patient
Masterful job
Thanks my friend.
Very lucky bike! With a bit of attention and love, this baby comes back to be part of the life of a person. 80's were plenty of BMX everywere, and of course bring me back some lovely memories. As always, nive job! Big hug!
I know I can’t be the only one here that recalls the freedom and excitement of riding BMX as a kid. I had GTs, Haros and Mongooses (Mongeese? Haha). They’d all probably be worth some nice money nowadays. Thanks for the video, your restorations are always fun to watch.
Missed you talking and the peaceful music. Great build by the way. As soon as you put the pads on i was back in the 80s awesome. Big love from the UK 🇬🇧
My first REAL Bmx back in 1986 was a Chrome GT, can't remember the model, but I do remember that it was featured in a BMX mag that year and told my dad how much I wanted, he got it for me on Christmas, it had plastic 3 blade GT rims! Thanks for bringing back the memories.
Great restoration old shovel BMX bikes was awesome back in the day
Awesome job! Thanks for given a 2nd life to that great gt!
This build made me unreasonably happy on the inside. Thank you
Awesome 🙌
Even the music fits, good touch.
Staffan Carlén. Always good to hear his stuff.
Thanks
Ahh the memories, raced with my kids in the 90s. Our transportation was a Ford Festiva so three bikes ot break down and reassemble at every race. Good times.
I love the ride vid at the end! Great music choice and cruising the suburbs!! Felt like an 90s film!! Like my childhood! So epic!!
I had a 1989 GT Mach One, but i gotta say this one looks cooler..The blue and yellow make it look awesome AF!
As 80s old school BMXer love to see this one. You get me inspire to finally finish restoring my 1984 Mongoose II, that I rode back in the 80s.
This video just bring back every good moments I had with my bmx back in the 80’s. Thabks for that
Awesome
$8.00 that's amazing!! I have the same bike love it!!
Love your videos I not long restrod a 1979 GMX-250 GIANT BMX I fell back in love working on bikes after started watching UA-cam videos Cheers Will
As an old school myself-- I love the attention to detail and care you gave to this bike. Redline 600 cxl here- still love that bike and wish I had it.
Some restorations hit close to home. I still have my chromoly 1986 GT Mach One with upgraded Flight cranks (and Dyno number plate), so I enjoyed watching you return this 1989 to its roots. Nice work. My Mach One was raced pretty hard for four years and has been enjoying its well-earned retirement ever since.
That’s awesome. Thanks for sharing your story.
Great to see you tackle a BMX build. I've found the WD-40 & very fine steel wool works great on removing rust from chrome too, just finished up restoring an '88 GT Performer for a high school friend that he can now ride again with his son. Lots of us out there restoring BMX along with mtn and road bikes, great to see this. Keep up the great work!
I like the wire wool soap pads.
They have to be quad 0 (0000) grade though.
I've used aluminum foil crunched into a ball. It's softer than chrome.
I've just had a barn find. Gt dyno and a 1978 redline frame, bars and forks.. not sure if I should restore or sell to someone who can do a better job.. from what I can see though the redline frame is quite rare. Any thoughts?
@@simonabraham415 Bikes this old were treated like how any kid treats their toys. How many expensive baseball rookie cards were shredded in the spokes of my bike when I was a kid?
Personally, if you have the interest in restoring it yourself there is a plethora of information on youtube you could access. Slow and steady.
But, if it's just a financial thing then list it on eBay and someone world-wide who appreciates this frame will approach you.
Sweet! I’m working on restoring my 88 sterling fs-700 as we speak!
I will like to think you made this video because of my sugestion,..I sat down, relaxed and enjoyed..!!! Of course, you wouldn't disapoint..thank you so much.
My pleasure
Yes!!! This is exactly what I’ve been hoping you’d do once! Would love to see you doing some more 80s old school BMXes! Love how the colorway turned out!
My late best friend used to have a GT Pro Performer back in the mid 1980's. I was a Redline fan myself starting with the PL-20 and then switching to the RL-20II.
I currently have a 94 rl840fs and I love it
It amazes me how foil cleans chrome. Great job the blue tyres brings back memories of my raliegh mini burner that was all blue with those tyres. Awesome. Gotta get in gear and sort a gt performer 98 that I have to clean up like you I want to keep it's scars and make it ride well.
The vintage cranks are big money.
Love this BMX restoration! Earlier this year I found this channel when I was restoring a newer BMX I saved from someone's trash.
Love old bmxs
My first BMX bike...took me back. Thank you!
When I was at school I had a gt fly bmx absolutely loved it. Don't make them like they used to.
Awesome build! I love the simplicity of bmx bikes. And those upright bars suit my casual upright riding style these days.
Very cool! My first real bicycle was a GT performer in the 1980s and it was yellow with blue accents. I love those old GT bicycles!
Awesome
Dude. Radical bike. Love the color coordination with the decals.
Thanks
11:20 - Oh! The blue tires! So needed after I saw. ****ing best blue possible!
God I love the look of 80's BMX bikes. One of my childhood friends, back in the early 90s, had this BMX with oval shaped tubing for the frame. I have no idea what it was to this day. It had no decals, and looked like it had been repainted, but it was a really nice looking bike. This video just kinda sparked that memory in my brain...
Awesome
Great resto as always. Would be nice if you did a video covering all the oils/lubricants you use for each application and why. There are so many different types of lithium, ptfe etc and knowing what you recommend is best for bearings chains and so on would be a interesting video…
Looks great! Love your content. The outro music was very 80s BMX-ish appropriate!
I remember those pedals from the days - my shins still have the marks of 'em...
You should source a pair of alloy GT- cages for this bike (DX- style), that would really make it the part... great build, lovely nostalgia!
when he got to the pedals i got a shiver and said "o god, bear traps" later on in life we got smart and used lizard skin shin guards.
So rad. Give this man a full face helmet and color matching kit.
🙌
DiaCompe make repop MX-1000 and MX-890 brake calipers and DiaTech 3 and DiaTech 4 levers which aren't terribly hard to find.
SE racing make some nice classic chain tensioners.
They would look amazing on this bike.
Awesome video another 80s classic BMX bike saved from impending doom! 😁👍
Lol you had me at 89 gt. Love your videos but this one hit right up my alley being an oldschool bmx guy. And my current ride being a old school mtn bike/cruiser turn bmx. Love this one
Awesome thanks
probably my favorite build so far👌🏼 loved the jump clip at the end too haha
Remembered here in Marseille/France years 1981,saw guys riding a Redline and a PK RIPPER,simply epic..next in 1985 friends have the legendary GT,Haro and Skyway ..other have Magnum too..
Awesome
Awesome restoration! For future reference, you can buff and wax the decals to get them all cleaned up and shiny again. Also, wet 1500 grit sandpaper instead of a file to clean up the nuts.
Cool vintage find
I'm loving your videos. Just found you and I'm very excited. I found 2 old 90's style MTB (full suspension) sitting in the trash in my apartment complex. I picked them up and plan on rebuilding completely, and going to do a paint job too. A lot of firsts will be had on this project, but I'm hoping I've learned something from binging your vids.
Keep up the awesome work, you are seriously impressive and love your video style.
Thanks my friend 🙌
That was fun and and an education to watch. I did not miss the BMX era but man the adult riders today that were all in then have some mad bike skills ;) And I love GT’s embossed top tube. I just found a 2000 Saddle Back for $20, a bit rough, but mechanically solid. Replaced all the cables, packed the bearings, and swapped to more ergonomic bars, and it is my new favorite. I thought of your channel during the hours on the stand and the wash trays.
Awesome Rob. Thanks for sharing your story.
nostalgia overload with bmxs. unlike mtbs, bmxs just hits way too deep 😁
Thats some old school shit right there. Love it.
Silver, yellow, blue = GT. Nice restored and ciao😉👍
Yeaah I remember my bmx bike its was a blue one, alphina deluxe. I was riding to school with my sony walkman on my belt playing duran duran.. these where the days when I was really happy..👍
Awesome
Love the bike pal I used to have a Peugeot tear drop frame chrome with black skyway tough 2 mags and power disk crank and Mx brakes I loved that bike on the track
Love the way the bike turned out.
Yes! Changing it up a bit! I cant wait for the next retro kona build… could you possibly do a fix up spending no money on parts at all?
I’m restoring an old department store bike but when I found it, it was only frame and fork and spray painted over 3 times. I can’t find another like it so I got it powder coated and put gt performer bars and gt mallet stem remake with grip and 22mm bottom bracket so I could put 3 piece cranks. Only thing I need now is some white mag wheels but not sure where to find any. Love the build man!
Great vidéo. 👍
Time to rebuild my old Raleigh Burner. 😁
🙌
Awesome find, wish the thrift stores near me would have bikes like that at all, let alone for $8. Great job bringing it back
I Owen a 1983 mongoose supergoose chome and red,is like a jewelry to me,I'm going to keep it for life..!
Great restoration build! I had one of these as kid road it till it fell apart and rusted out.
Awesome build gotta love retro 👍🏼yellow or silver pedal be great
Have a 1980 era gt Mach one ride it every time I get a chance love that bike
This bmx content from you that i waited so many month,...
8$ for a GT would never happen in Germany! always so jealous of you, You find such nice bikes for a real bargain at your thriftshop ^^ Such a nice GT :)
I was lucky enough to come across an 88 marin muirwood and an 89 kona lava dome recently, both in terrible shape. When I restore them to oem I'll be thinking of you and your awesome creativity.
Nice build Cru! I’ve been wondering where you have been! Please thank Rob for letting you sub in.
🙌🙌🙌💯
Used to have one of these along with a Pro Series. Miss them both.
This is so rad
Sweet jumps
I remember a GT BMX I bought at a car boot sale in UK, many years ago, it was in poorly maintained condition, the people I bought it from claimed it was used for racing..
The cranks were held on with pieces of metal in between the square taper and cranks and feel part as I was trying to ride home! I ended stripping it down and kept the frame for some years before selling it on eBay, regretted it soon after! I should have restored it when I had the money!
Nice GT! Nice ride! Chao!
Yet another awesome build could watch all day 👌🏼
Love the blue tires!
Take that straight to the pump track!
I still have my 1989 FreeAgent. I've ways kept it in rideable condition. It hangs on the wall in my shop now but with some air in the tires it's ready to ride. I still want to upgrade the cranks to a set of Redline Flights, I may do it one day.
Nice resto, would love to the power series cranks on it.
Totally. They are $$$
AWESOME! All things taken into consideration, this is an excellent recovery of a BMX Bike Icon. Just one little thing... you could have stuck a Chromed backed GT head stock badge on it as the cherry on the cake. Your use of colour parts is brilliant... great job well done.
What the?! I recognize Mueller Park when I see it. Awesome you live in B-town too. Loved the restoration!
🙌
When faced with trying to retain a crank arm from turning I use a U Lock. You find that good position and it holds really well. No stretch.,
I love the finished bike it's incredible!
Thanks
Great video! And what an extraordinary find 👍🏻 I like that you do not make it “mint” condition but revive it to a good looking working condition for it to be ridden again. And for me almost the best part is that you take it for a ride 💪🏻👍🏻 That is what it was ment for and not only a show piece in a mancave. Great job 💪🏻, Thanks!
Great job, sir! Looks just an 80s build, and well done on the new parts - pretty good match! Weird seeing an 80s frame with a threaded BB. I would have assumed it’d be a one-piece crank, but that black three-piece goes well.
at the end he mentions he wishes he had the period correct (1-piece) cranks.
Very cool! I had a '96 GT interceptor as a kid. My first "real" bike that I paid for myself. I kinda hate myself for letting my mom sell it for $50. At least some kid got a fantastic deal.
Ooof, blue tires. Know they were the thing back in the day, and they go perfect with the bike… but man, they hurt these old eyes, ha! Great build!
Love it...reminds me of my first "real" bike that taught me how to jump and bunny hop. I started MTB at around 12 yo and just kind of left BMX in the past, but I still appreciate them. I can't ride BMX anymore cause of an injury, unfortunately. I still MTB, just not the same as I used to...a lot more leisurely.
Oh! It reminds me the pending project I have restoring my brother’s BH California for his sister. It was impossible to remove the stem. And forget about to lub bearings… it was a pain in the ass to adjust the length chain… until I saw one of your videos… I love chrome frames. It would have been nice to see you removing all those scratches to learn.
Forgot the Walkman… 👍🏻👏🏻👏🏻👏🏻👏🏻
Hey great video. My first bike was a GT mach one. Loved GT ever since. Looking at this build I realize I have a pair of old CQP cranks (the dogbone alloy ones) that would look great on there. If you're interested let me know. I've also been working on a GT karakoram MTB resto that I'm still in need of parts for. So might be able to work out a deal in trade. At any rate. Channel is awesome totally motivated me to get an old MTB and fix it up even though I grew up riding and still ride BMX.
very clever restoration. as a mobility impaired senior i challenge you to build a 16" 3 wheel rollator with fat tyres that are studded to negotiate bad sidewalks during winter and a frame that folds so one could board buses and trains . painted in camo od green matte finish and brakes and adjustible to fit all peoples.
I have the nos cranks chain ring and paddle set as well as seat and tyres some day hope to find a bike nice enough them to go on
I have a few GT bikes I have restored over the years , I wish I could find some for 8 bucks! Lol! Great job👍
I know right. The bike was the least expensive part of this rebuild.
Rad bike! love the music!
I’d love to find a Redline 500a for the same price. Was my dream bike in the early 80s
Cru Jones would be proud!
A GT, for 8 dollars??? Holy cow!!! Shovel transformed it into $800👍 There is a sweet ‘83/‘84 Race Inc frame on Minneapolis CraigsList right now, redone & powder coated, going for $400. That’s just the frame!
In the next video will you track down whoever put the triple chain ring on it? They need to be stopped! Great job as ever.
Lol
This one deserved a little bit more. Hopefully it finds a good home and gets the full treatment.
Good color scheme.
D.I. find! Love it.
🙌
I recognise that front chainring, it's the same as what I have on my (recently acquired) 2010 Intense Moto Expert XL .
I am an old school female BMX racer (raced during '81-84 years, I started racing aged 13) I am 54 now 😁