HOW TO RELIC A LES PAUL GUITAR. Stephanie Burst relic. Part #2
Вставка
- Опубліковано 1 жов 2024
- It's time to relic Stephanie Burst. I'll show you how to age a Les Paul guitar.The full version of this video with detailed comments on technology and materials is on my Patreon in the Maker level.
Patreon. / 8bombcustom
There you will find private content, tutorial videos, giveaways of my PAF clones and access to auctions. This will allow me to make more quality videos and more translations into English. You can also support me through PayPal: 8bombdovnar@gmail.com Thank you!
Workshop website: www.8bombcusto...
PAF pickups clones: www.8bombcusto...
Instagramm: @8bombcustom @doctornitro @ikoniquestudio
Rokanroll For All!
![Gibson Les Paul R9 refinish. PART 1 [How to remove Gibson factory lacquer]](http://i.ytimg.com/vi/yks_xVrv3y4/mqdefault.jpg)
I like relicing when it's done properly but sometimes this is painful to watch! Great results, though.
Thank you
Dr. Nitro, I most sincerely doubt there is anyone more capable than or better than you! Your guitars are absolutely breathtaking!
Thank you!
Curious what the heat does before you use the scotch brite or the M3 0000 pad? Does it soften it so it mattes the paint better?
I have a 2005 LO standard in trans amber that has a lot of great natural wear but the thing is just still so glossy it looks awkward, so I’m debating knocking back the gloss to dull the finish a bit.
I also wish it would check so bad.
Doesn’t anyone relic a guitar by playing it anymore?
✌️😎🎸🎶🎵🎶🎵🎶 I’m just saying I wouldn’t do this myself, you done a few guitars and you’re very good. Leave it to a professional like yourself.
Yes, when you have only one guitar with hard nitro.
It took me forever to allow things to happen randomly. I've seen poor relic work that have very noticeable patterns. There are specific areas that wear will occur but belt wear and scratches have to be random. Your work is every bit as good as I've seen from the Murphy Labs.
Thank you
Just play the damm thing. Thats how to relic it.
Fantastic videos my friend. You do great work. Do you know if the freezer checking method works on new gibson nitro? Or will it be too thick? I have a SG Special body which i want to throw in the freezer....
Thank you. Modern Gibson nitrolac has an extremely high amount of plasticizer, so it is soft and sticky. I recently tried aging a Gibson SG with the original gibson nitro. The temperature was minus 24 degrees Celsius, in two cycles of 12 hours. And not a single crack in the varnish. Unfortunately, this is so. But you can always try.
@@8BombCustom thanks 🙏🏻 much appreciated. Have a great day!
@@8BombCustom Update: Just received the Inverness green SG special a couple of days ago and had a go in the freezer - a handful of dispersed cracking around the whole guitar - gonna try a few cycles to see if i can get some more! I laid the guitar to rest in my bathroom (around 25c) for a few hrs then put it into the freezer (-18C). Vertical checking just like i hoped 🙂
This is amazing to watch! The detail you go into to give it a naturally worn look is dedication to your craft!!!
Thank you
Your work is amazing. I have a 2003 LP that has naturally checked, but all the checking runs horizontal with the grain. It looks great, but I wonder often why I see so many others that run in the opposite direction, across the grain. I watched your efforts here and again I see the checking seems to be in the other direction. Is this just how it happens? Keep up the great work!! Thank you for posting and the fine translation to english!
Thank you. I've seen examples like this with cracks in the lacquer along the grain and I have a couple of these guitars. Such cracks indicate that the wood of the guitar has been exposed to a strong drop in humidity and drying out. There were several such cycles. The wood fibers expanded too quickly and contracted strongly when dried. Therefore, cracks in the varnish turned out parallel to the texture.
@@8BombCustom Thank you for the clear explanation! Much peace! Nick
Nice job Dr. Nitro, but relicing a guitar is just a fad in my opinion. It's doesn't hold the value or appeal of a naturally played and worn guitar.
It's probably just me but I find this painful to watch. Leave the poor guitar alone man 😅
All this to lie and say "I used to play in a band"? As a musician I cringe at this. You better play like fucking lightning in a bottle you show up with this shit. I have a 1981gibson I played for 15 years in a band sometimes two bands at once and I haven't come close to wearing through the paint.
@@livefreeordie1776 congratulations
Show neck finish checking, please. Thnx.
All answers to technical questions with a detailed explanation can be found on Patreon in the Maker level: www.patreon.com/8bombcustom
Dude! When I walked into your shop, I said 're-spec' my Les Paul... :)
The only thing else you could have done to that would be to wear the wood where your hand would have been picking and strumming, but other than that, it looks great!
Looks Great! Always Beautiful work. Cheers!
Thank you
Dude! I really want to see the replica you made of Slash's Kris Derrig LP. Around 10 years ago, I also built an LP based off of that guitar. Do you have a website that shows your other work that doesn't appear here on UA-cam? Thanks!
Thank you. 8bombcustom.com
A really resonant piece of wood.. When you tap on it!💥👍
Nice job and thanks for posting
The checking (cracks) look great, how long did you leave it in the freezer for?
What type of relic/wearing will you do for the neck?
I just played a Murphy labs 59 (heavy aged) a hour or so ago, the neck and feel was amazing
All this hard work really does improve the feel of the guitar
Thank you.
Natural aging occurs with hardware on the guitar. It would naturally be aged to a lesser degree under these components - under stop bar, bridge, pickup rings, etc. Overall looks very good, though.
Thank you
Your attention to detail is not matched.. cheers to you and your efforts and techniques..!!
Thank you!
PLAY IT FOR 20 YEARS
I don't need it. I can make it much faster 😁
16:40 That outfit drives me LYNELLEE.Uno nuts on you and you have that curvy body. You did a good job modelingj it too. Also like the last outfit 20:11.. Love how the garter belts connect to the stockings and sheer top
Thank you
WTF man!!? Lol
@@johnwhitaker545 😁
This is the best LP relic so far in UA-cam, \m/ awesome sir \m/
Thank you
If someone does this to my guitar, he will always be on run. Joke apart geat work.
😁 Thank you
а можно то же самое видео, только без английского дубляжа?) где найти?
ua-cam.com/video/QV7TNPo2Uzk/v-deo.html
tom murphy reaction: :-O
this was a little different... Tom said: Again this dude is painting our guitars without permission. He needs to be stopped from doing this. call the lawyers. 😂😁😁
@@8BombCustomi have a 2015 LP standard with a hard finish. I rubber some álcool and it corode the finish, then i semi- polished ir woth toothpaste. It got a VOS lool, but no cracks... I was thinking about razões boas cracking but it doesnt lool very natural...
@@pedrolourenco2707 rasor work Don't give a natural look at all
I thought it looked great the way it was...
Thank you
I absolutely love your product..cheers..
Thank you
Why?? Just asking, LOL
Simply because I can and I can do it well. 😁
Я всегда рад видеть ваши работы. Скажите, пожалуйста, время замерзания и температуру замерзания, чтобы краска растрескалась. благодарю вас. я японец
Thank you. All answers to technical questions with a detailed explanation can be found on Patreon in the Maker level: www.patreon.com/8bombcustom
Thank you !!
is that watercolor or acrylic?
You will find about all the materials that I use and about all the nuances of working with them on my Patreon in the Maker level
www.patreon.com/8bombcustom
Great work man. Cheers!
Thank you
LOVE THAT RIBBON FLAME!
👍
Go boldly
Thank you
Amazing,, bravo 👍👍
Thank you
Why ?
Just because I can
Awesome 👌
Thank you
Loving these videos
Thank you
А по русски больше не будет?
На русскоязычном канале
ua-cam.com/channels/G3xYHwm6CmY1Gj_JqejoFA.html
Looking great man
Thank you
I see no point in this.
Yeah, people like the look. I do too, but if it's not real it doesn't have the same feel. It's kinda cool I guess, but the novelty of vintage guitars is in their history. Not all those wonderful hours of rubbing sand paper and loose screws on it 🤦
LOVE THAT RIBBON FLAME TOP! STUNNING!
Thank you
Великолепный результат, как всегда 👍
После каждой «операции» хочется сказать ‘хватит’ , но невозможно оторваться - мастер лучше знает, конечно.
А как будет трескаться поли лак после морозильника? И потрескается ли он вообще, интересно?
Thank you