Stay tuned my friend. MHD update now lets u moniter over can bus. Those 2 extra wires that i said dont do anything, now they found a home! Will be doing an updated video or a pt2 to wiring the reflex ! 🙏🏽
@@brandon_30ff sounds good I subscribed. I went with RB game finisher high flows should be shipping in a few weeks. Installing motiv after I do the turbos so maybe mid/late November hopefully the videos out by then👌🏽
Big shoutout and thanks to you for taking the timeout to guide me through wiring my canHI/low. If you guys ever need any assistance hit him up on IG or here in the comments he’s very responsive. Continue making good videos and helping us folks in the N54 community. Not all of us are as hands on but with good instructional videos like yours we find the courage to help ourselves.
I just got done installing mine and doing an engine swap but now I have no communication to the dme. I noticed where you installed the ground for the reflex, there is the ground coming from the dme box which I have connected but where is the other cable on that ground coming from?
Thanks for this video it was very informative and helpful. I have no idea about wire and I recently picked up my car with reflex installed. My issue is I need to connect CanbubHi and low to DME now that the feature is available. After watching this video I think I should be able to do it. I just have to find pin 14 and 1 on DME?. Thanks.
I would look on the instructions on motiv’s website to fjnd exactly which wires to tap into. I will be posting a video on that as well ! Because i have to do that
Great video helps out a lot. I'm installing mine as well but I'm having trouble understanding where to tap in my Mac Solenoid. I have the Reflex+ and wiring isn't my strong suit. Was wondering if you can help me out
Im on the same boat, i installed everything and motiv checked it and everything is working very good, but im stuck like you, idk how or where to wire the mac solenoid, so that the reflex controls the boost.
@@brandon_30ff Appreciate it bro, loving the content as well keep it up! Can you make a vid about setting up the flex fuel and what you need to get it running right and connect it to mhd, I’m tryna pre plan before I order things for my car but it’s confusing as hell cause there so much ways to do flex fuel
@@platanogarage i start the flexfuel on minute 16. Its kind of brief i kept it short and sweet, if you still need more info or help You can hit me up on instagram brandon_30ff. I will also be uploading a video on an upgraded feed line to the hpfp and plugging in the e85 content sensor too. So stay tuned for that
@@dereksmith6365 it all depends on what you want to do, if you are thinking about doing port injection then i would recommend using the motiv reflexBUT you dont have too. I would talk to your tuner and see what they want you to run for a port injection controller, i went with Ken at wedgeperformance and he suggested me to run the moriv reflex due to the advanced features and flexabily it has, and to be honest i dont have any regrets. People will run jb4/splitsecond.
@@brandon_30ff i want the pi but honestly want my car to run right now. Looking to see if I can run the motiv without pi for now..just can fine that information...Ive heard good things about the motiv
@@dereksmith6365 to be honest i don’t think you can… since the motiv is the port injection controller its bascially like the DME for the new 6 injectors you are adding while doing port injection. Since the motiv taps into the stock wiring of the dme to pick up signal to know when to know to fire the extra fuel/whenever to kick on. I understand you want the features of it. But it would br pointless and i dont think it would work without the port injection, also the stock DME bascially has all those great features in a way if that makes sense
Greetings, I have reasons, it does not want to connect to the computer, nor does it activate the injectors, I have made all the adjustments and nothing positive.
In order to communicate with the reflex all you need is the power and ground cable hooked up. Along with using the program tunet pro RT. I havr another video explaining how to flash the reflex. This is just for wiring purposes.
Never wanted to mess with the dme but with this I’m installing that shit myself appreciate you bro!!
Stay tuned my friend. MHD update now lets u moniter over can bus. Those 2 extra wires that i said dont do anything, now they found a home! Will be doing an updated video or a pt2 to wiring the reflex ! 🙏🏽
@@brandon_30ff sounds good I subscribed. I went with RB game finisher high flows should be shipping in a few weeks. Installing motiv after I do the turbos so maybe mid/late November hopefully the videos out by then👌🏽
@@3dirty5 lets goo thats sick man
Need videos of this thing rippin.
Looks better sitting
🔥🔥🔥
Big shoutout and thanks to you for taking the timeout to guide me through wiring my canHI/low. If you guys ever need any assistance hit him up on IG or here in the comments he’s very responsive. Continue making good videos and helping us folks in the N54 community. Not all of us are as hands on but with good instructional videos like yours we find the courage to help ourselves.
Thanks homie much love Appreciate the comment, im only here to help🙏🏽
Grea video! 🔥
❤️🙏🏽
Dam, ur car must be fast 💨
Not as fast as a 2jz
I just got done installing mine and doing an engine swap but now I have no communication to the dme. I noticed where you installed the ground for the reflex, there is the ground coming from the dme box which I have connected but where is the other cable on that ground coming from?
Thanks for this video it was very informative and helpful. I have no idea about wire and I recently picked up my car with reflex installed. My issue is I need to connect CanbubHi and low to DME now that the feature is available. After watching this video I think I should be able to do it. I just have to find pin 14 and 1 on DME?. Thanks.
I would look on the instructions on motiv’s website to fjnd exactly which wires to tap into. I will be posting a video on that as well ! Because i have to do that
That’s if ur willing to wait for a video.. if you want you can message me on instagram Brandon__30FF. I can help you more out on there
Atta boy ji
❤️
Great video helps out a lot. I'm installing mine as well but I'm having trouble understanding where to tap in my Mac Solenoid. I have the Reflex+ and wiring isn't my strong suit. Was wondering if you can help me out
Im not single turbo but i can try to help you out. Have you checked the instructions on motiv’s website?
@@brandon_30ff what's your IG I can message you there
@@mejia55 brandon_aldana04
Im on the same boat, i installed everything and motiv checked it and everything is working very good, but im stuck like you, idk how or where to wire the mac solenoid, so that the reflex controls the boost.
Hey you by chance have instagram? I could try to guide you on there..
What’s up bro, love the series.. are you running msd80 or 81?
Hey man, i am running MSD81 !
Do I got to worry about the yellow and green if I have a msd81
No. The yellow and green wire are for canbus which for e90’s Is still in development. So you dont have to worry
@@brandon_30ff Appreciate it bro, loving the content as well keep it up! Can you make a vid about setting up the flex fuel and what you need to get it running right and connect it to mhd, I’m tryna pre plan before I order things for my car but it’s confusing as hell cause there so much ways to do flex fuel
@@platanogarage i start the flexfuel on minute 16. Its kind of brief i kept it short and sweet, if you still need more info or help You can hit me up on instagram brandon_30ff. I will also be uploading a video on an upgraded feed line to the hpfp and plugging in the e85 content sensor too. So stay tuned for that
Will this work as a boost controller as well?
Yes. If u go on motiv’s website, click on the reflex “installing and wiring” there should be a pdf explaining how to wire it.
Fuel it lines fit better
How’s that misfire
Facts, i been had the fuel it stage 4, for n54 since 4 years ago, no issues at all with fuel or lines.
hey can you assist, your video helped alot, but i can get motiv to connect to my laptop.
Try this and let me know how it goes !
HOW TO FLASH MOTIV REFLEX ! N54 335i
ua-cam.com/video/WQVMWsgVVqc/v-deo.html
So idk if you know this. but do I need PI to have motiv reflex. I have a n54 but there's not alot of info I can find
Hey man, i can try to help. Im just curious as to what you are trying to do? And why you’re trying to run the motiv reflex.
@@brandon_30ff just installed a single turbo.. ill end up getting PI just not at moment
@@dereksmith6365 it all depends on what you want to do, if you are thinking about doing port injection then i would recommend using the motiv reflexBUT you dont have too. I would talk to your tuner and see what they want you to run for a port injection controller, i went with Ken at wedgeperformance and he suggested me to run the moriv reflex due to the advanced features and flexabily it has, and to be honest i dont have any regrets. People will run jb4/splitsecond.
@@brandon_30ff i want the pi but honestly want my car to run right now. Looking to see if I can run the motiv without pi for now..just can fine that information...Ive heard good things about the motiv
@@dereksmith6365 to be honest i don’t think you can… since the motiv is the port injection controller its bascially like the DME for the new 6 injectors you are adding while doing port injection. Since the motiv taps into the stock wiring of the dme to pick up signal to know when to know to fire the extra fuel/whenever to kick on. I understand you want the features of it. But it would br pointless and i dont think it would work without the port injection, also the stock DME bascially has all those great features in a way if that makes sense
when the programming video dropping?
Next week either friday or saturday. Im currently working on editing the videos
New video is up 🙏🏽
Greetings, I have reasons, it does not want to connect to the computer, nor does it activate the injectors, I have made all the adjustments and nothing positive.
Are you sure you connected the ground properly? And how do you know the injectors arnt activating
If the motiv connects very well with the 12 volt switch, the injectors are not activated in the base mode.
In order to communicate with the reflex all you need is the power and ground cable hooked up. Along with using the program tunet pro RT. I havr another video explaining how to flash the reflex. This is just for wiring purposes.
@@brandon_30ff what is the title of the other video