RiteWing Nano Drak Overview
Вставка
- Опубліковано 28 вер 2021
- Walkaround on my Drak. Fantastic little plane that is a blast to fly around.
Aircraft:
---------------
TMotor F80 1500kv
TMotor 45A BLHeli32 ESC
APC 5.5x6.5
Matek F405-WSE
BN-220 GPS
Crossfire Nano RX
ESP32 Lora
Emax ES09MD Servo's
DJI Air unit
Ground:
----------------
DJI FPV Goggles V1
TBS Tango 2
3d Printed parts:
www.thingiverse.com/thing:497... - Розваги
Great summary and flying. Bought a nano boomer 28 partially built a couple weeks ago. Pretty much had to rebuild it. Ailerons hung below the wing by 3-4 mm so had to fix that. But it's done now and waiting for weather and a hole in my schedule. Can't wait.
Nice setup! How many amps are you pulling in cruise mode? Ive got some Molicel M35A 18650 (10A) laying around and I thought if it worth bulding a 6S pack for some calm flying?
nice build. ive used tango 2 for planes before, and i hated that there are no trim switches.
Wow I've been flying wings for a little over a year and will definitely be going 6s I have been hesitant because my 4s setups run really nice
Great summary! Now changing my setup based on seeing yours. Was going to use a vista but now will mod for an air unit. Will still keep the bigger wheelbase though.
I'd say one headache with the DJI AU is the antennas. These are longer antennas on mine. I saw one with a very nice vista setup on top in a little protective bay. No issues with overheating there. It was well tricked out too. Coroplast separated by sections and it all looked very well done.
@@NotamedClosed do u know where u saw it
@@mikeybroe1 Facebook I think. Probably the Ritewing group.
@@NotamedClosed i did look but i was unable to find one
Was the video at 100% speed during that landing? So buttery soft, well done! Love your videos!
Nope...that part was slowmo.
Great video.
Could you use the DJI air as the receiver and skip the CRSF ?
Roughly how much range do you get from DJI air ?
Thank you !
Your a beast mate! Do you reccomend this for long range high speed cruise and stable video footage ? Or do you reccomend anything else for what am looking for ? Thanks in advance and keep up!
This or the AtomRC Dolphin are both good options.
Great design! I just ordered a NANO extended yesterday and wanted to do exactly the same setup with a GO2 but with Vista unit. What glue did you use to attach the TPU mount onto the DRAK? Again, great design and I am glad I found your channel, also sub'd!
Thanks. I've using E6000 primarily for most of my gluing needs. I make sure to rough up surfaces, especially a TPU print that was on a glass bed or something, prior to gluing.
@@NotamedClosed Thanks man!
Hey Notam! Pretty close to completing my NANO and wanted to know what your ESC settings are (IN INAV) on your F45A? I am using the same ESC and it seems to run OK on just about every INAV Protocol except STANDARD, thanks!
I though that battery said 652600 mAh on it
That's a lot of MAH!
What is the overall weight of your setup?
Do you have a link to the battery used?
I built that out of Molicel P26A 18650 batteries. Pretty cost effective way to get a battery if the size works for you. $5 USD per battery so about $30. Plus some nickel strips, wires, and plugs.
Did you have to add any weight to the nose? And do you happen to know the dry weight?
No extra nose weight needed. 581g.
@@NotamedClosed Cool, are you using the standard 17mm in front of spar cap for the CG then? Thanks!