Bind ExpressLRS Whoop Drones
Вставка
- Опубліковано 7 січ 2023
- 🙋🏼♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV?
Join 'The Hangar' 🛩 my members only community - you get:
💰 Affiliate Program
🎁 Members Giveaways & Promotions
🎓 All my existing & new Courses
🧰 All my workshops (live & replays)
🧑🎓 All my Tutorials
📋 All my Guides
📺 All my Videos Add Free
🎬 Directors Cut Videos
⏰ Bench Time Live Hangouts
🤝 1:1 Help/Support
‣ Go to DarrenFPV.com to join or learn more
🔗 www.darrenfpv.com/the-hangar
If you feel like building a 5" Freestyle Drone is too hard, you just need the right guidance.
So, I built a course with 71 highly detailed but simple modules, breaking down absolutely everything! They're can't be anything missing, if there is, I will add it. If you have a HappyModel, Flywoo, BetaFPV, GepRC Whoop that uses an All In One Flight Controller and it won't bind to ExpressLRS, it's not you, so Do THIS to get your Drone bound & flying.
SPI Page on ELRS Website:
www.expresslrs.org/3.0/hardwa... - Наука та технологія
🙋🏼♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV?
Join 'The Hangar' 🛩 my members only community - you get:
💰 Affiliate Program
🎁 Members Giveaways & Promotions
🎓 All my existing & new Courses
🧰 All my workshops (live & replays)
🧑🎓 All my Tutorials
📋 All my Guides
📺 All my Videos Add Free
🎬 Directors Cut Videos
⏰ Bench Time Live Hangouts
🤝 1:1 Help/Support
‣ Go to DarrenFPV.com to join or learn more
🔗 www.darrenfpv.com/the-hangar
Thanks, Darren. A lot of stuff out there, but you have helped me get out of the woods a few times.
Hours spent resolving when I was on D500 and not the needed 500Hz option..... Appreciate it!
One of the problems I had when I received my radiomaster zorro ELRS was that I could not bind to my meteor 75 ELRS, and it was that the receiver is SPI and it was in version 1. And the radio in version 2. Luckily I asked in a facebook group what I should do and ended up joining an ELRS server or discord group and they helped me at all. The only thing I had to do is just update the drone receiver to 2 and then I could finally bind it to the zorro. For the next time, I would never buy SPI receiver type, definitely. I'm grateful that you make this kind of videos to help a lot of people on this problems. Thanks!
You are welcome 🙏 glad to hear you are flying
I hace quiet the same problem my sorrow it’s on 3.3.0, and I actualise my meteor 85 on the firmware 4.4.2.
I could bind the radio but when I get in beta flight on the receptor screen, the bars doesn’t move at all. The roll, pitch, yaw and T decenas the number onto 988. And the quad rolling like crazy.
Some one know what could be the problem.
I have the maps Chanel aert on the radio and the dron.
😢
Oh my god you’re a G!!! I spent hours looking for a solution. You’re the only one who talked about these issues. Thank you so much. I did subscribe.
Glad to have helped! Thanks for subscribing
Good info mate. Don't forget the bind process. Most newer elrs receivers can enter the bind phrase be powering on and off the FC 3 times in quick succession. This will force the FC to enter bind mode. Don't bother typing bind_rx into the CLI of betaflight....this simply wont work. Also make sure that the ELRX RX firmware is the sameas the ELRS TX firmware. If not then they will also not bind.
Great info Darren.
This should help a lot of people including me.
Thank-you.
Glad it was helpful!
This video really helped me on the frequency as mine was set to 100Hz and it did not bind. Changed to 500Hz worked.
Glad it helped!
Thank you so much!!! After hours of frustration this video got my drone in the air. Just had to change my zorro to 50Hz and boom! I’m definitely subscribed now!
Glad it helped!
Thanks Darren! Solved my issue, ive been struggling for quite a while now. My issue was the packet rate. Changed from 100hz to 150hz. All good 😁
Nice. Glad to have helped
Dude, you realy helped me to solve the issue. Extremely useful content. Thanx!
You are welcome
Thank you for making this video! And helping me with this exact problem! 🙏
You're welcome!
Supported packet rates is what fixed it for me. Thanks.
But it took me a bit to realize that F500 and 500Hz were not the same thing. I saw the 500 and moved on.
Great, easy to follow video. Killing it lately.
Thanks Jack!
thank you a lot!
You're welcome!
Thanks for the helpful video, the packet rates was my issue. Set my Radio Master pocket TO 500HZ and it finally would bind.
Glad it helped
I have expresslrs nano 2.4 it's now collecting dust cant bind it, using xmplus so simple and easy to setup
Darren with the clutch info exactly when I need it. Thanks. Meteor75 here we go.
Glad to help!
@@DarrenAllatt turns out I fell under the UART category, but this video definitely got me going in the right direction. great content, thank you
really good video. straight to the point, subscribed
Thank you!
@@DarrenAllatt thank you man, i've got one more question because i have ordered a new receiver for my tinyape, what i have to do with the spi receiver if i use an external receiver? kind of shut it down?
sorry if u said it in the video i didn't remember
@@giulioc3610 when you set the receiver in BF to SERIAL it disables the SPI RX.
@@DarrenAllatt thanks again! :)
genius thank you very much
You're welcome!
One could also migrate all these spi rx birds to quicksilver? I understand it’s compatible with Elrs 3.x
That’s a good idea, I will have to look into that
I have a meteor65 Pro ELRS Serial RX, i lost my binding with the Radiomaster Boxeer. How to get it back? i am really confused
Thanks Darren. Helped me on spot! As for long term solution: Wouldn't BF 4.4 (and further versions) be capable to use updated ELRS versions (until a certain point in the future)?
Technically yes, but BF4.4 has a watered down version of the ELRS code (hence the limited packet rates) but you don’t want BF to have to have ELR code in it, makes BF heavier and more process intensive than it needs to be. You also don’t want BF having to worry about ELRS code, when they should be focusing on their own code.
Long term, AIO’s will move from onboard receivers over SPI to UART where they will have a dedicated processor for ELRS and it won’t be the job of BF to do that.
@@DarrenAllatt Makes sense, yea.
What about if the whoop has a serial already stalled instead of SPI receiver?
Then you would use the normal process, because it means it has its own external receiver built into the board
I have a problem, I can't connect the meteor 75 pro version 2022 to betaflight, how do I check which receiver is on my drone, whether SPI or UART?
What’s in the receiver tab already?
Hey Darren, thanks for the video! I have a happy model baseline elrs and boxer elrs. They are both now on v3. I can’t get them to bind. What steps should I take next?
What’s a happymodel baseline ELRS?
Are they using the same:
- binding phrase
- ISM band
*bassline from happy model. I’m a beginner so it’s all new to me! I have set the binding phrase on my radio. How do I set it on the drone through the cli?
@@Sam-ei4yx can you send me a link to the happpymodel bassline I don’t know what that is
Hello! Can you give me a guide on how to bind betafpv pavo25 to literadio 3 pro and v03 goggles. I can’t seem to bind them.
Newbie here. Thanks
I am happy to provide 1-1 help for a consultation fee. Head to www.darrenfpv.com/co-pilot-beginner-coaching-for-fpv
Hi, now that official betaflight 4.4 is launched, if I have a mobula7 with SPI ELRS2.0, I just need to flash the FC and it should be able to bind to my ELRS3.0 TX?
Yes you should updated to 4.4, however take a backup of the CLI before you do.
Then it should just bind.
The ELRS and SPI saga continues. A problem they knew was there and did nothing to prevent.
What do you mean?
V3 is supported in BF4.4, and manufacturers are now dropping SPI from their boards in favour of onboard ELRS receivers over UART, for the consumer there is no detriment, rather benefit as they can now get all further updates..
Also why support a protocol like SPI when a full onboard UART is better
@@DarrenAllattELRS is a convoluted process to get up and running. If it is so wonderful why does it take several UA-camr's 1 hour each to explain the process? The whole ELRS idea with the manufacturers doing one thing and ELRS not getting hardware to certify and blah blah blah. I bought a ELRS BNF from a top manufacturer and had to connect to WIFI to figure out which receiver I had because they did not bother to document it. Then it's name was not listed in the ELRS Configurator.
My ELRS Tutorials are around 7 minutes, if you are watching 1 hour tutorials on ELRS, then someone is wasting your time… Yeah I feel your pain on manufacturers not involving the developers, they get pissed because they work for free to make the system, companies produce hardware and make a profit, then the ELRS team have to provide customer support. It’s pretty shit in that regard… Yeah they typically use the DIY firmware out of the box which can confuse new users with a target mismatch.
It doesn't sound like a very good top manufacturer if they didn't even document what RX target they use so you can update the firmware. SPI ELRS is something I think the ELRS devs regret manufacturers pushing them into... since it meant the RX code became of betaflight and end users have to play the this or that version of betaflight to make stuff work. So getting rid of this (SPI ELRS) entirely is a good step forward, as is unified targets so that firmware builds/updates will be much simpler in the future...
I’m trying to bind to my gerpc 2.4 ghz transmitter no luck at all
Can you please let me know:
- What Transmitter do you have?
- What Drone / Receiver do you have?
- What have you tried to do to get them to work?
what can i do if i have uart?
What do you mean sorry?
Betaflight 4.4 already has elrs 3.0+
Yes, that’s right
for some reason i cant find the 4.4 version, can you help?
EDIT: found it!
Glad that you got it
How do I bind my tbs tango 2 mpm to my mobula7 1s spi elrs? My mobula7 hd 1s bound no problem but this one will not. Thanks
Just so I understand you correctly, you have a Tango2 with a Multi-Protocol Module attached?
Which Multi-Protocol module do you have?
And your Mobula7 HD is that the ELRS version or the FrSky Version.
@Darren Allatt I have the spi elrs and the not sure what the mpm is but I use it for all my whoops and crossfire on 5".
Wow I feel like an idiot 😕. the hd was frsky. this one is elrs. operator error
@@jonathanmcwhorter1353 All good, we've all been there
I have a different problem.
I had no problem binding the expresslrs module to the transmitter. the problem I'm having is stick input. I even tried switching the TX and RX thinking I might have put them backwards and that didn't solve the problem. It's a brand new transmitter brand new flight controller everything's working except for stick input.
I know I'm missing something simple like a lua script.
Mixes tab in your radio
@@DarrenAllatt 😏👍 I'll have to check that first thank you.
@@DarrenAllatt no they appear to be fine. I'll be working on this for a while I had the same problem with the XM Plus receiver and I don't know why.
A little more detail is required here... I. E. stick input is a problem in what way? No movement on the receiver page in betaflight configuration? Wrong channels moving? Moving the wrong way? With what receiver/TX combo? Firmware versions? I. E. If its SPI RX, and you have the wrong RF mode set, no channels will move. If the channels are not in the order BF expects, wrong channels move.
@@pfeerick I just uploaded a video explaining or answering most of the questions you've asked as far as stick input zero. I'm beginning to wonder if it's the receiver. I'm making sure all my firmware versions of the proper before I do anything else including my Express lrs versions
Best long and cheapest way is to have an android device and connect to the TXs wifi and flash it over wifi. Just have two firmware ready ;)
if I understand this correctly, what you are saying is, to flash ELRS v2 to your TX from your phone when you want to fly a Quad with an SPI RX, then you when you are flying a quad with a normal RX, to then re-flash v3.2?
Or, just update your ExpressLRS SPI Quads to Betaflight 4.4 and you are good to go!
@@DarrenAllatt yes correct. Just have two firmware ready for your tx if an update of your SPi RX is not an option
@@dronevan when would it not be an option to update your SPI RX firmware?
@@DarrenAllatt one month ago there was no official EalRS 3.x support for SPI Boards. Maybe ur a guy who is very satisfied woth all settings and your tune. every BF update brings new features and filter which can lead to a diff flight performance. This is just one reason why not to update your FC firmware. But nowadays ELRS 3.x is supported
WILL NOT WORK WITH NBD HUMMINGBIRD ELRS V2.1!
Which will not work?
hey was hopeing you can help me out here boght a HummingBird F4 V2 ELRS2.5 BNF with MK3 VTX 25mw 27000KV and the Jumper T-Lite V2 ExpressLRS(ELRS) Radio Transmitter but i havent had luck on binding can you pls help follow your video and nothng happend was hopeing you can help me out
If you want 1-1 help go to: www.darrenfpv.com/co-pilot-beginner-coaching-for-fpv
offcourse i am the guy with the "total different problem"
Can I plz plz send my drone and radio I’d gladly pay you to bind plzz! I’ve spent days tryna figure it out I have a Tx16s elrs & meteor 65 pro
They are both flashed to 3.2
I’ve got them both set to 500hz
I’m so lost
I’m in Australia. If you want you can DM me on Facebook and we can work something out.
Learn to Build a 5" Freestyle FPV Drone 🎓 www.darrenfpv.com/buildmasterclass-5freestyle
smash that subscribe button like 3 or 9 times in a row thx very much!
Thank you
Using a tango2 with betaFPV elrs module. Nope.
What do you mean?
none of these worked for me
Ok, that’s a little strange.
What Whoop/Quad do you have and what Radio or Transmitter module do you have
@@DarrenAllatt eachine uz65 ELRS/ radiomaster tx16s, ive set both to the same 2.5.1 firmware in ELRS config,and matched phrases using the generator but still no bind.
Set your radio to 250hz packet rate.
Your Whoop shouldn’t be running ELRS 2.5.1, how did you flash that to it?
How did you add the binding phrase to it?
On the UZ65, you need to run BF 4.3 and your Radio 2.5.1
Set the packet rate on your radio to 250hz.
@@DarrenAllatt ok imma try that out ill let ya know.
@@DarrenAllatt i used the phrse generator on the website, i plugged in the code using Betaflight CLI mode. I want to note that i also have a 5in quad i run on elrs daily.
I swear expresslrs is going to make me leave the hobby! I have struggled for days to bind my new tiny whoop to my new radiomaster ranger. Days. I've had Bardwell on loop trying to figure it and after your video I'm all kinds of confused. Take my money dji at least then I can fly
What’s confusing?
What tiny whoop do you have and what radio is your ranger plugged into?
Have you successfully flashed your ranger or where is that up to?
I have the radiomaster tx12, not mark ii. And the new ranger micro elrs plugged into the Jr port. The whoop is a eachine uz65 1s. The radio seems to be working, I can go to the controller, go through the rangers' options, hit bind and it searches, turn on wifi, it's there. I think the problem is the elrs receiver and possibly assigning arm and air/angle switches. The uz65 comes up on betaflight as a spi but it has a separate receiver, it's not an all in 1 board. And the receiver led stays red. It doesn't blink, change colors, I press the button on receiver and nothing, hold it , nothing. I put it in bind in betaflight and on the tx12 in the ranger hit bind and nothing, no bind, no different change in led color.... maybe because I have a bind phrase on the controller but have no idea how to create a bind phrase for the uz65 receiver.
@@dustinpugh8222
Ok, so which version of Betaflight is on the whoop, and what does it say in the receiver tab? "Serial, and then CRSF" or "SPI-RX with ExpressLRS"
The button the receiver is not a bind button.
@Darren Allatt it says spi rx (built-in receiver)
And the next line says expresslrs. Wondering if I need to update betaflight to 4.4
@@dustinpugh8222 well, I give two solutions in the video:
1) Update to 4.4
2) Downgrade Transmitter to 3.5.1
Pick your poison there
Subtitles are distracting.
Thanks for watching with audio on 🔉
Wtf man, just tell us how to bind it, it won’t
What quad are you binding it to and have you set up your radio correctly?
This video is so hard to understand. Useless.
Everyone else seems to understand it but you - so it seems you are useless and not the video.
@DarrenAllatt are u sure about everyone?
Yeah I am sure and anyone else who’s had a problem is like you - unable to understand the basics.
Watch the video on half speed if you have to.
But enlighten me. What’s the problem and why can’t you bind your stuff?