Відео

had mine 2 years ,, hmmmm still going strong ,, the wiring inside is twisted to tight grounding wires out causes lots of issues with charging and sd card failures .. run 3.01 elrs and you will have no issues the wifi module on my has failed so will not connect to flash firmware ,, edge TX recommends now the the memory card is internal a flash chip eliminates the no sd card error .. new jumper and boxer radios are all boards with plug in connectors no solder joints anymore ,, all radios with external sd cards on edge TX have issues

My solder wire is sticking to the sotering iron after melting

Don't measure them! 😂

I don’t know your gonna respond because it’s an old video but when you say to repeat it for every channel I don’t really understand what you mean and also I don’t know if everything is actually good right now do you think you could help me?

S I'm flying a lot more and this is just the info I need moving forward

the science is thin cable ands fragile motors, making people think they're lighter and so more efficient

What's the total weight with everything (frame, TPU, electronics, O3, battery, GoPro)?

for me the expresslrs.lua would just stuck loading (not finding internal expresslrs) .. can you tell me how to set up expresslrs on the tx16s mkii? thanks!

does this radio is for helis and airplane also??

My tx macs out at 100mW, I seen others with 100mW, how do the get 1000mW notice yours was 100mw

thanks for learn us

My controller is stuck on telem 1:2 and not std. i can’t get it to change????

everybody can make fpv motors and fpv piloting and signalisation simply. they will be so important army tools. fpvs will be the bullets.

I have a boxer elrs 2.4g. Is it worth it to add 915mhz module?

Thank you for making this straight to the point and easy to follow.

Perez William Williams Frank Martinez Donna

Thanks for the video. I watched a bunch before this one, and it really cleared things up. I was looking at a 288Wh power station with 300W (600W surge) for my 200W DC lipo charger, but with 5 batteries at 1200mAh each, I’m now thinking a 1000Wh+ power station might be a better choice.

Taylor Daniel Hernandez Mary Rodriguez Ruth

Gonzalez Sharon Moore Melissa Perez Anna

super great thank you berry much. Edit: now i cant access the expressLRS menu from the controller it seems my computer corrupted something in the process and now i have to figure it out

FIRST RADIO

Hey Darren, another Aussie here. Just wondering how you get around flying FPV with Goggles... legally. I am in Melbourne and it seems to be totally not doable unless you belong to a club full of bellends.

Martin John Jackson Daniel Lewis Sarah

hello have a problem, need help, after update my Jumper T20 Gemini, i can't up to 1000mw anymore - max 500mw. That is a problem, what I can do for keep back or find the Factory Setup for keep back the possibility to up to 1W. Thank you for help 🙏

Smith Anthony Thompson Jeffrey Johnson Scott

I think this video is outdated.. For me this does not work.

what is the name of the analog goggles?

main problem with the 03 goggle is the 100hz display vs the 144 on the v1 and v2s. if you tested both you cant use the 03 for anything fast or it WILL drop frames leaving a jagged motion video that makes most ppl go wtf is this?

Yeah, you do already now need to plug your iPhone into the Goggle V2's for the DJI Avata and I bought the Avata pretty early but it already had the RID firmware on it. But then you don't get the 10-bit color upgrade and the other small upgrades they did. Plus, I think that includes the "Yaw Tumble Fix" problem... I can't stand having to plug my iPhone into the USB-C port on my V2's. I don't really fly it anymore bc of my Fpv drones, but that also didn't help lol. Then you need to launch the DJI Fly App with the Drone already on and connected, wasting battery, and then hope that the DJI Fly app works the first time and the Avata Screen pops up to hit FLY. Then I'm supposed to leave it plugged in for no reason or i get that stupid yellow error bar in the bottom right hand side of my Goggles Screen the entire time. My iPhone's usb/charging port also isn't the best so that just adds to the frustration and hate towards it lol. But yeah, usually i would waste about 10% of my battery with the Avata, from just sitting there and waiting for some signal from the DJI Fly app on the phone, thru the goggles, and to the Drone. All to say RID is ready ATM. The part that always bothered me is that the DJI Avata has a built-in GPS... So it knows where it took off from and it knows where it is and its broadcasting RID. Why do I need the phone which i can just immediately disconnect after arming anyway? Makes no sense. This video is exactly why I've been hesitant to get the Goggles 2 or even the Goggles 3. But if the 3's have a GPS chip inside, then i think that would be a deal breaker for me until I had too. They could easily add a GPS to an O4 Air Unit, and then we might be stuck with RID if you want to go with anything newer than the Vista's and O3 Air Unit's...

Im building this. So the board issue? I was going get 25x25. But after ur problem i went with a 20x20 speedybee. Alsoo did u use the supafly preset?

I have a Jumper T20 V2 2.4G, and wasn't able to use the "passthrough mode" to update ELRS firmware, as I kept getting errors despite selecting the correct firmware. The WiFi method worked though, and I continued through the "mismatch" error that ELRS Configurator throws up. However I also downloaded the LUA script from the latest ELRS Configurator, and overwrote the old one (elrsV3.lua), with the T20 connected to my PC in "USB Storage" mode My first radio was setup years ago, so I've forgotten where everything was. Really appreciate the refresher!

Jackson James Anderson Lisa Williams Frank

Garcia Lisa Young Karen Rodriguez Susan

Do you think it's possible to mount this onto a Nikko Air Elite 115? It's a toy, yes... But It's all I have and I need an extremely light and small camera for it. Also it'd be nice to get some recommendations on what goggles or screen receiver thing I should get to receive the video from that camera?

453 Littel Glens

I chose DJI and I love the image quality. But if you still want to fly tinywhoops, a decent pair of analog goggles pays for itself quickly. You can get some great little analog rippers for $100-$130 USD. Using digital doubles the cost of each of them. With Wasp and vista being phased out, using DJI 03 triples the cost.

Need help, is still can't bind the buttons. I do the moxes like in every video. But the buttons doesn't respond when use drone. Binding is not a problem. Can't just mapping the buttons. Bullshit. Can u please make more unstertable what I have to do to bind all the buttons korrekt.

Does anybody know if Fatshark HD and Walksnail booth have 1080p 100hz? I have the fatshark and it only lets me go up to 1080p/60

He wrote that defo claim himself. No lawyer on the face of the earth writes like that 😂 If he's struggling to make ends meet, providing actual content that people are willing to join a Patreon for seems like it might be a good idea. I just bought my first drone, during my initial YT hunting I ticked "do not suggest this channel" on Justin's videos fairly early on because of the rampant shilling. IMO he should take the critcism and adjust his business strategy... Instead he creates drama for a few $$ in ad revenue.

amazingly well done video...succinct yet thorough....

that thumbnail photo was hilarious lol

nice nice! Btw, how do you usualy use the knob on the Remote? the one with the S1 and S2 button

Im thinking analog for fpv and put gopro for production. Dont need giga good vision for pilot imo

this is about integrity, i feel sorry for Chris as he may not realize this discrepancies of the size to the label in the beginning ( im trying to be optimistic) but all is said and done.. now what is more interesting to do is for you to measure other famous 2207 motor with caliper and show that in average this industry is maintaining their integrity or just selling bollocks. just my 2 cent. great work!

S

Hope you're doing well, Darren.

So, I am beginner and bought a pocket to learn on. My hands are used to controls where moving drone is on left. Thrust is in right. Is the silver hex screws in a screw a lot inside controller put can be reached by Allen hex key.. does that change the controls from default to custom ?

I disconnected the gps. It’s two UFL connections

What about the taranis?

Парень, столько глупостей я давно не слышал, ты сам то реально разбираешься в теме?