Powerstroke Problem

Поділитися
Вставка
  • Опубліковано 23 вер 2024

КОМЕНТАРІ • 34

  • @cw9041
    @cw9041 3 роки тому +11

    Thanks for the video with not a lot of worthless filler. Short and sweet.

    • @TorchedTv
      @TorchedTv  3 роки тому

      I know. I hate fillers in videos

  • @jaythewhizdog3842
    @jaythewhizdog3842 3 роки тому +1

    I hope this is the problem with my truck. I bought it used from a Ford dealer three months ago and they went through the whole truck and replaced the turbo in it. Now it’s make a noise like the truck you worked on. Brand new turbo and I thought it was going out already. I pulled off the intake and checked the turbo and it spins fine and has no play. I’m hoping it is the exhaust manifold bolts now. I can fix that no problem. Thanks for the video.

  • @PhilipWahlbom
    @PhilipWahlbom 3 місяці тому

    Well done video. Thanks!

  • @leave_it_to_levi1652
    @leave_it_to_levi1652 6 місяців тому

    Is it the first high pitch squeal or the second screech when your letting off , my truck is giving the deeper squeal when I let off , but the manifolds are still in tact with no broken studs , turbo is still good
    I’m curious what can cause the second squeal when letting off

  • @eevalobo
    @eevalobo 7 місяців тому

    So is the noise the second high pitch noise or the first high pitch noise that’s like really short. The second noise always happens after the loudest when you let off the gas.

  • @darrelwilson2875
    @darrelwilson2875 3 роки тому +2

    I hear a whine now at idle. It's intermittent though. Was your steady?

  • @jimsperlakis5634
    @jimsperlakis5634 2 роки тому

    Nice Job. Would have liked to see it with a clock timer running just for reference.

  • @happysawfish
    @happysawfish 2 місяці тому

    Sounded good to me. Southerners like squealin. I would have paid more for the truck.

  • @jmyers9853
    @jmyers9853 3 роки тому

    on the 6.7 you can stick your hand down the intake to check the turbo for worn bearings.which would make the turbine hit the housing. should not be any play

  • @BobSmith-mc7uq
    @BobSmith-mc7uq 3 роки тому +3

    Good job on the video.

    • @TorchedTv
      @TorchedTv  3 роки тому +1

      Thanks dude

    • @blazeowen1135
      @blazeowen1135 3 роки тому

      not sure if you guys gives a damn but if you guys are stoned like me during the covid times you can watch pretty much all of the latest series on InstaFlixxer. Have been streaming with my girlfriend during the lockdown xD

    • @idriskaleb3298
      @idriskaleb3298 3 роки тому

      @Blaze Owen yup, I've been watching on instaflixxer for months myself =)

  • @rvadventures
    @rvadventures 3 роки тому +2

    I have a 15 and 19 and never heard this. But it does sound like a air leak once under pressure.

    • @TorchedTv
      @TorchedTv  3 роки тому +2

      Yup. In my case, broken manifold stud.

  • @jomint7569
    @jomint7569 3 роки тому

    Great vid. Sounds just like my truck. How long did this you?

    • @TorchedTv
      @TorchedTv  3 роки тому +1

      About 2hrs start to finish. But Im pretty good with a wrench. The average Joe will probably take longer.

  • @35057
    @35057 3 роки тому +1

    I’ve got a very faint squeak at no throttle. But goes away under even faint throttle. Just wondering if that’s the beginning of the squeal.

    • @umpman04
      @umpman04 2 роки тому +1

      WHO CARES. Turn Up The Radio ! ! ! Save the $$$$$$

    • @35057
      @35057 2 роки тому

      @@umpman04 finished deleting it and it went away 😆😆

    • @umpman04
      @umpman04 2 роки тому

      @@35057 EVEN BETTER!
      Wish I could do it too !

  • @greenwings1195
    @greenwings1195 3 роки тому +3

    Long story short, broken exhaust manifold studs

    • @zmndrf
      @zmndrf 2 роки тому

      How hard is that to fix? Mines making this noise..

    • @greenwings1195
      @greenwings1195 2 роки тому

      @@zmndrf super crappy, you are best served to change all the studs and both manifolds as well. Parts are cheap believe it or not but it’s a ton of labour

    • @wisetow10
      @wisetow10 Рік тому

      Every time

  • @anthony5530
    @anthony5530 3 роки тому

    Well I just bought a 2011 powerstroke. Probably going to have to do some mods. Thanks for the vids

  • @dustinlambert2458
    @dustinlambert2458 3 роки тому +2

    I have the squeal but no way in HELL I am going to do all this myself. lol. This looks horrible.

  • @MiggyMSS
    @MiggyMSS Рік тому

    Video is straight to the point but wow this makes me not want a Ford lmao

  • @Denkha94
    @Denkha94 3 роки тому +1

    Nice work 👌
    But Cummins baby

    • @TorchedTv
      @TorchedTv  3 роки тому

      I like Cummins too. I just don’t like how shallow the dodge cabs are.

  • @mattmcfly2165
    @mattmcfly2165 3 роки тому +2

    Only a bolt here a sensor there... Twenty five later... 😂