That's been one Of the best Turbo upgrade videos I've ever seen and it is definitely a plus to have a 10 blade in a 6.0 because that's where they fall on their face the top end and exactly why a compound or a triple Turbo is the best thing to do Believe me I'm going to get the best VGT Turbo along with A good compound additional Turbo So I can keep the benefits and have good top end performance
YOUNG MAN!!!! You just taught a ….not …quite so young man how to rebuild a turbo!!! So yeah I’m gonna keep my $1300 take like $4-500 and buy this kit and pay myself the $800 for the labor. Cheers!!!!!
Good video hands down brotha, good words and real descriptive. We’re a small mom pop shop out in Cali but cool see other mechanics, Cali laws suck so we’re mainly putting egr deletes back to stock, like on dodge 6.7 which sucks because deff chokes up the the turbo and idk how many vgt we sent out to get rebuilt. But keep grinding brotha. Sub
Won't work on 7.3 unless you run a standalone controller to run turbo and by then you should've just got a KC38R. KC38R works better for a 7.3 than any 6.0 charger.
I have an 04 6.0 and have a major oil leak that I can’t find. I was told that it’s from the bottom seal of the turbo. It’s coming from the top of the motor and running down both sides of the bell housing. Idk if that’s where it’s leaking for sure. Any help on this issue would be greatly appreciated.
Left Lane Diesels Damn thank you for the fast reply!! 5w40!! First time I hear someone running that oil weight! I guess I’m gonna have to search more on that. Thank you again I really appreciate the info!
May I ask how many miles did the truck have when you rebuilt this turbo? Looking at doing the same exact thing but mines up there in the milage and was wondering if its even worth my time and money to rebuild it or just get a whole new turbo?
@@LeftLaneDiesels thank you very much! I just got this kit plus the union ring and im about to go put it on right now. Mine does have 345k on her so ig ill see if I can make it work or if I need a whole new turbo. Bad thing is that you don't know if its fixable or not until you got everything taken apart 😂. Thank you very much again. I appreciate it
Cheapest? If you are on stock fuel, unplug your wastegate, you won’t be able to fuel enough to destroy it. Napa 6637 air filter, straight piped exhaust, and a upgraded compressor wheel is a good set up. Check out riff raff diesel. Hydra chip is a great bang for your buck too
It’s a higher flowing wheel for 2004.5-2007 6.0 trucks. Stock size for 03-04.5. More higher end performance for the late model 6.0s and a louder whistle similar to the early style
Stock blade count, not stock turbine size. 03 turbos have a 66mm 10 blade turbine, 04.5-07 turbos sport a 64mm turbine, the KC turbine is 64mm, smaller than the 03/Pmax turbo.
Left Lane Diesels , I just don't want people to think you can hock one out of an 03 turbo and try to use it. You can but will need to machine exhaust housing
I have been having major issues as of late.. This is my first 6.0.. I'm tired of the Stealership.. I have story for you if you would ever love to have a chat.. my email is d4sheriff@gmail.com..
Hey I like you post amazing I have a 6.0 and I want a exhaust like the one the you have and a loud turbo pls email me back with info were to get the turbo kit and a nice loud muffle
Quoted directly from the KC Turbo website: "includes upgraded 360 degree thrust bearing, new thrust collar, new oil slinger, new piston rings, new journal bearings and sleeve, new compressor cover oring, new backing plate oring, and 4 extra backing plate bolts." I don't see anything about a bushing. What are you referring to? Just want to make sure I didn't miss something.
Nothing special is needed for loud whistle. just a stock 03-04 10 blade exhaust turbo and 03-04 pedestal with a straight pipe exhaust. Btw he left out the hardest part by far, reassembly of the exhaust housing.
Nice. How come you didn't do an upgraded compressor wheel? Totally cool video if I sent you my Turbo and a new kid how much would you charge me to do the work?
Stumbled across this video. Love the way you describe everything as your rebuilt that turbo.
Just earned my subscription
Mike Rogers same
Mine too
Man you can definitely tell it's cold af in your shop! I know this is an old one but thanks for hanging in cold to give us great content.
start up 25:12 YOUR WELCOME
Randomly came across this looking for KC Turbo reviews and dude what a great video
That's been one Of the best Turbo upgrade videos I've ever seen and it is definitely a plus to have a 10 blade in a 6.0 because that's where they fall on their face the top end and exactly why a compound or a triple Turbo is the best thing to do Believe me I'm going to get the best VGT Turbo along with A good compound additional Turbo So I can keep the benefits and have good top end performance
Thanks for the information about the turbo. I have been wondering how to get my 6.0 to whistle
I will be placing an order .
I really love how that oil looks like glue 🤣🤣 the great north 💀🚫
YOUNG MAN!!!! You just taught a ….not …quite so young man how to rebuild a turbo!!! So yeah I’m gonna keep my $1300 take like $4-500 and buy this kit and pay myself the $800 for the labor. Cheers!!!!!
Thank you! This helped a lot. I have oil coming out of my exhaust. Time for a rebuild
Thanks dude you walked me through this for my first time👌
Love the sound of the turbo but rather have low end torque for towing. I have a 6.0 van and will be upgrading to the Wicked Wheel 2.
Good video hands down brotha, good words and real descriptive. We’re a small mom pop shop out in Cali but cool see other mechanics, Cali laws suck so we’re mainly putting egr deletes back to stock, like on dodge 6.7 which sucks because deff chokes up the the turbo and idk how many vgt we sent out to get rebuilt. But keep grinding brotha. Sub
Man I turn wrenches and couldnt imagine putting egts back on hell no! Move bro, move lol
Thanks for the video 2019 will be ording my KC Turbo upgrade for my 2006 F350 :)
Oh yeah, looks good, may have to rebuild my 03.. good video, keep em rolling
Thanks again for the information on this KC turbo 😃👍
Can swap a turbo on a diesel pickup. Never heard of interior wipes, or any such cleaning products for that matter.
You did a superior job on this video. Thank you!
Just found your channel man. I'm excited to see where it goes. Subscribed and turned notifications on!
Eliandrew7.3 awesome thank you!
So you used the stock 13 blade compressor wheel with a 10 blade exhaust wheel
Also there's are words to live by you can never have enough lubrication
Nice. Thx for the step by step.
Awesome job! Very detailed!!!
Wow man good job. Never had a 6.0 but very informative. Keep teaching man good job.
Awesome! I love the whistle. May do this to mine.. although it sounds similar to that already. Maybe previous owner did it.
What is your stack setup?
Hi Cody,
I have 2005 F350 and I have started to notice oil being sprayed on the top of the engine and engine hood. Is that coming off the turbo?
Thank you for making this video! Just earned my subscription!
Hopefully the front seal was already in the piece you put in the front cover!
Is it recommended to have the rotating mass balanced?
Can you do a video on the high idle switch to the parking light?
Yeah we need videos on how to install it on the 7.3 the 6.0 turbo on a 7.3
Won't work on 7.3 unless you run a standalone controller to run turbo and by then you should've just got a KC38R. KC38R works better for a 7.3 than any 6.0 charger.
Wonder those 17 dislikes , who was it why though?,this must be the best tutorial I ever saw
I have an 04 6.0 and have a major oil leak that I can’t find. I was told that it’s from the bottom seal of the turbo. It’s coming from the top of the motor and running down both sides of the bell housing. Idk if that’s where it’s leaking for sure. Any help on this issue would be greatly appreciated.
Best video iv seen
Sounds good. Great video.
Is that all you can inform on is Ford diesels or can you inform me on duramax to?
Sounds killer man
What’s the difference with 360 and Extreme 360 rebuild kits? Only 20$ probably will get the extreme
I did that kit on my turbo but it came with both wheels
Do you know a tuner for a deleted lly?
Great video!
great video...good teaching vid...side note...what type of oil was in your oil dispenser that you used during assembly.?
15w40 valvoline, just something to help lubricate seals
Thank you sir...have a great day and I look forward to your great videos...
How do I know which one my truck has. It’s a 04 6.0
I rebuilt my turbo with the ten blade drop in turbine but now I can’t hear my turbo on the exhaust side at idle what could cause that
I went to the website and wanted to make sure, I need to order the 360 kit plus the 10 blade? Is that correct, there were so many different options
Hey bro on the options kc turbos website you have a different size billet wheel size which one is best??
Wish I would have seen this before I dumped $1200 on another powermax. And threw away an 03 turbo I had that needed seals.
What do you think about the gt4088r for a 2003 turbo garret?
This dudes building a jet engine in his garage. Soviet Russia would be proud 🫡
Anyone else notice the faint wind howl after he gets it together.
Can you regain the low end at least back to normal with an exhaust? "I'm trying to stay legal."
Some one told me that there are two different size housing for the 2006 ford f350 dually and if there’s not wich turbine should i
CAN I GET A 10 blade turbine for my dump truck turbo??
On 13:45 are you supposed to install two steel o rims or only one?
Do you have a part number on that kit
As soon as I tighten up the blades the 10 blade gets stuck wth
a bit better than the stock turbo
Hey just wondering if you had already turned on the truck before the video or was it dead cold and if so how did it start without any hesitations?
Truck was cold. Properly working glow plugs, 5w40 Schaefer’s oil, good injectors, 6.4 starter
Left Lane Diesels Damn thank you for the fast reply!! 5w40!! First time I hear someone running that oil weight! I guess I’m gonna have to search more on that. Thank you again I really appreciate the info!
Eddy Grand no problem! Here is a link to a video I made about the oil.
ua-cam.com/video/0AehZzTkLq0/v-deo.html
Great video.
I’m from Michigan broooo. Warren Michigan
May I ask how many miles did the truck have when you rebuilt this turbo? Looking at doing the same exact thing but mines up there in the milage and was wondering if its even worth my time and money to rebuild it or just get a whole new turbo?
180k and most likely if it’s 250k miles or higher you might be better off replacing whole turbo
@@LeftLaneDiesels thank you very much! I just got this kit plus the union ring and im about to go put it on right now. Mine does have 345k on her so ig ill see if I can make it work or if I need a whole new turbo. Bad thing is that you don't know if its fixable or not until you got everything taken apart 😂. Thank you very much again. I appreciate it
My wife hates the 10 blade I put in my 06.
He said poop 0:39
The exhaust sounds like my 6.4 with 6.0 manifolds a little bit
te quedo calidad muy buen trabajo y bien explicado 👍👍👍👍👍
I ordered from them twice I never got any T shirts
Good job
Nice Job !!!!
Well done thanks
do you know anything about 7.3 powerstroke upgrades?
Andy truck yes I do! I used to have a 7.3
Left Lane Diesels what is a best cheap turbo upgrade ?
Cheapest? If you are on stock fuel, unplug your wastegate, you won’t be able to fuel enough to destroy it. Napa 6637 air filter, straight piped exhaust, and a upgraded compressor wheel is a good set up. Check out riff raff diesel. Hydra chip is a great bang for your buck too
Left Lane Diesels thanks man and I will
Will i be able to run a 03 turbo on my 00 7.3? Without a tune or chip
Time to wake up my 04
Would I be able to run a wicked wheel 2 and a 10 blade drop in in my stock 06 turbo? Also would it sound as good?
Yes you can, at that point order both from kc turbos and they will balance them together. It will sound just as good if not better
Awesome thank you for the reply
I see 2 of them On there sight is it the powermax billet wheel or the
6.0 POWERSTROKE KC BILLET TURBO COMPRESSOR WHEEL
Was this a larger wheel or just a drop in 10 blade that is stock size?
It’s a higher flowing wheel for 2004.5-2007 6.0 trucks. Stock size for 03-04.5. More higher end performance for the late model 6.0s and a louder whistle similar to the early style
Stock blade count, not stock turbine size. 03 turbos have a 66mm 10 blade turbine, 04.5-07 turbos sport a 64mm turbine, the KC turbine is 64mm, smaller than the 03/Pmax turbo.
Shawn Weimer correct I misspoke. 03 has a larger housing and wheel. The 10 blade drop in has less blades then the stock 13 found in the later models
Left Lane Diesels , I just don't want people to think you can hock one out of an 03 turbo and try to use it. You can but will need to machine exhaust housing
Shawn Weimer absolutely man, glad you said something cause there’s a lot of misinformation out there, so good to be very clear
Would this be alright on my stock 265,000 mike 6.0? Or am I risking my head bolts
It would be fine, as long as you don’t tune it I don’t thing you would have an issue
You should just bullet proof it
Is this the DIY 2.0 kit?
Clay Brooks no it is not, this is the 10 blade upgrade, with 360 rebuild
Will a 11 blade kc sound similar?
I don’t believe there is such a thing as a 11 blade kc turbo. Only 10 or 13. The 10 blade is loudest
Nice job man
Why is Joe Biden yelling at me? I only care about turbo's for my 7.3?
Were r u located.. would love to have you work on my truck!
Michigan!
Well I'm ohio.. Just outside of Toledo area. Small town of Curtice..
I have been having major issues as of late.. This is my first 6.0.. I'm tired of the Stealership.. I have story for you if you would ever love to have a chat.. my email is d4sheriff@gmail.com..
16:25 just installed a hair onto your oring lmao
Damn huskies lol your the first to ever comment about it. I cringe every time I see it lol no harm no foul
@@LeftLaneDiesels lol I have huskies I know the feeling
Cool shit
Check out mine! I got the billet wheel plus the 10 blade and 360 rebuild kit from Kc Turbos! 😉
Hey I like you post amazing I have a 6.0 and I want a exhaust like the one the you have and a loud turbo pls email me back with info were to get the turbo kit and a nice loud muffle
Link in description
I know this is trival, but they are bushings. Not bearings
Trivial*
Quoted directly from the KC Turbo website: "includes upgraded 360 degree thrust bearing, new thrust collar, new oil slinger, new piston rings, new journal bearings and sleeve, new compressor cover oring, new backing plate oring, and 4 extra backing plate bolts." I don't see anything about a bushing. What are you referring to? Just want to make sure I didn't miss something.
I see what your talking about ☠️
Nothing special is needed for loud whistle. just a stock 03-04 10 blade exhaust turbo and 03-04 pedestal with a straight pipe exhaust. Btw he left out the hardest part by far, reassembly of the exhaust housing.
Dude make one and sell it to me
Dm me on Instagram, I’d be willing to do that! @left_lane_cbull
OOOOOOOooooooo not much louder at all.
sausage fingers lamo
Pretty toast sees breath smh
prolly like 30 f in that shop lol
Great vid bro!! Love ur channel. Check mine out i got a 6.0.and 7.3
Nice. How come you didn't do an upgraded compressor wheel? Totally cool video if I sent you my Turbo and a new kid how much would you charge me to do the work?
So for the actual kc stage 1.5 turbo is it the same to rebuild it
Great video
I have a 97 7.3 powerstroke will this 10 blade work for it ??