Why Your Vocals Sound Thin
Вставка
- Опубліковано 30 вер 2024
- A video on why your vocals sound thin, in any DAW i.e Pro tools, Logic, FL studio, Ableton, Cubase, Studio One etc. from your bedroom.
➡️ Visit Our Site For Goodies!: www.helpmedevv...
➡️ My Music Channel: @DevvonTerrell
➡️GET OUR EQ PLUGIN: cutt.ly/329lKtP
_________________________________________________________
▶ TEMPLATES (STOCK VERSIONS AVAILABLE)
➡️Pro Tools Template Download: cutt.ly/4fluyUY
➡️Logic Templates Download: cutt.ly/qfluoEp
➡️FL Studio Template Download: cutt.ly/4fluaAx
➡️Ableton Template Download: cutt.ly/tflufpi
➡️Studio One Template Download: cutt.ly/4fluaAx
➡️ Cubase Template Download: cutt.ly/uv2ok5Y
PRO TOOLS , ABLETON, LOGIC, FL STUDIO, CUBASE AND STUDIO ONE TEMPLATE AVAILABLE
_________________________________________________________
▶PRESETS
➡️Help Me Devvon Studiorack Presets Download: cutt.ly/Ng8wxPu
__________________________________________________________
▶ IMPORTANT TUTORIALS
➡️Getting Louder Masters: cutt.ly/l2M8Uvf
➡️Parallel Compression: cutt.ly/2sYt1hh
➡️Secret Mix Buss Technique: cutt.ly/Z29zKK4
➡️My Favorite EQ Plugin: cutt.ly/Y2M25uV
➡️Drake Type Vocals: • Mixing Vocals Like Dra...
➡️Equipment I Use: cutt.ly/Tyk5Ch0
_________________________________________________________
▶ PLUGINS I USE:
➡️Waves Studio Rack: cutt.ly/Qf8pmWl
➡️Waves Reel ADT cutt.ly/4yk527X
➡️CLA 1176 cutt.ly/ryk573b
➡️F6 cutt.ly/Kyk6rTA
➡️R Vox cutt.ly/3yk54Us
➡️Waves Doubler cutt.ly/oyk6wtb
➡️Waves NLS Channel cutt.ly/iyk6w0N
➡️Smack Attack: cutt.ly/SyvVrEQ
_________________________________________________________
▶ JOIN OUR COMMUNITY HERE:
➡️Our Discord: / discord
➡️Instagram: / helpmedevvon
➡️Twitter: / helpmedevvon
Email Me: helpmedevvon@gmail.com
#mixing #vocals #tutorial
Visit www.helpmedevvon.info for goodies!!
Does every frequency spectrum mid high low has to be same volume to have a fuller mix?
I would like to thank you Devvon.
Every single one of your videos is the formula. I have several questions I will ask a few.
What interface do you use?
What resolution are you recording at?
. Other than the Neve what else do you use on your mix buss?
I am currently using an Antelope orion synergy core and I am very dissatisfied with it. Primarily what I am missing with it is top in. I used to use ARME 800 and I loved it when I can pair mixes from the RME to the Antelope the Antelope sounds muffled same song same mix.
Do you do consultations?
Last question for now I am looking at the lynx Aurora.16 Ch AD/DA Or Apollo 16Ch hexa core.
I use a 16 channel passive Summing mixer powered by Neve 1272 with an API 2500 hardware on the mix bus.
The Antelope orion synergy core converters are not crisp it’s like 30% of the mix is covered with blankets.
If you do consultations send me an email with a cell number I will gladly pay you for your time and knowledge. Again I greatly appreciate as an older producer you taking the art form to another. level
great music and great engineering skills etc. Appreciate you
Khayree
Khayree1@protonmail.com
Which DAW do you use?
Please put out a course and Pro tools certification class
and SELL IT! So I can help fund this channel
i’m 80% of my way through a bachelors degree in audio production and this man teaches me way more than anyone else
I agree with all of this!
i was interested into getting a degree too, is it worthy ?
@@The_BurningMan get it for status & networking
@@Jp-tl4gj lol no
@@TheSecondC2 you sleep
I learned a new thing today that was brilliant, it thickened the vocal up at the click of 1 button. Pressing the phase invert on the EQ made the vocal thicker, only slightly but enough to notice the difference.
Dope vid Devvon!
Very helpful. Thank you
EQ la voz y quitar algunas frecuencias que estén más altas y hagan sonar delgada a la voz, ya que nuestro cerebro se centra en las frecuencias más altas de volumen de la voz. Quitar algo de frecuencia sobre 3KHz para quitar esa delgadez de la voz 3:50, también sobre la zona de 700Hz un poco, la diferencia de con y sin EQ en 4:45. En 8:000 potencia la zona de 3KHz para que veas cómo afecta a la voz esa zona.
I’m looking into buying a MacBook Pro budget of 300 two 400. Any options
Hey how much would you charge me to make me a template of my very own . I am an upcoming artist and i need a template that i can just hope on the mic and record and my song will come out great
It's crazy how you've taught me almost everything I know. I'll keep continue to grow and improve myself. I'm forever thankful to you bro
Real talk
Bro this guy is real I really like him
Bruh, my stuff sounds 10 times better now with your tips than when I was recording before I heard of you!! I literally went and re-EQ'd and compressed some vocals on some old recordings I had did using tips I got from you and they just sound worlds better. thank you so much!!
Litterally was ready to buy a new microphone unitlll I heard this, thanks man
When i started mixing i used to cut too heavily at the low end of the vocals - i've found a mixture of low-mids cutting & the "mud" region of 200-400hz to be a better solution. as well as some multiband compression, subtle stereo imaging and a touch of waves doubler all help give vocals that full sound. nice video!
I need a “stay with me” T-shirt ASAP!!
Sir 🧐 wtf is a "T-shit"
He'll lead you to the promised land if you let him. #BlackAudioMoses
How to make vocals thinner?My vocals sound too thick.
Proper eqing sire
high pass on the lows or just lower the low end between 50-100hz hope this helps
He didn't mention this, but every track has a differnet build up of lower frequencies when the mix is on. What i personally do is use a low shelf and place it maybe about 400hz and just pull it down 5 to 6 db. Your vocals will sound very sharp, yet sill have richness. This should be followed by compression.
Watch the video in reverse 😶
Reverse everything he do or turn down everything he do by 50%
Help me Devvon is my favorite show on the internet. This man is a gift from god
I didn't even think I needed to watch this. Now I feel like I just had a revelation and I'm about to go re mix all my projects. Critical breakthrough every time. Thankful for you, bro.
i understand everything so precisely Devon this shit so under-rated, we need a mixer who does not just do other people's vocals, but YOUR OWN Vocals! we're not tryna make beats or produce, we tryna learn how to mix our own VOCALS!!!!!
it's kinda rare for a engineer to teach you how to do vocal mixing....because they're all focused on making beats
you really gotta look at the eq and listen to yourself. Its the only way to get a custom mix thats perfect for you.
bro what? do you know what an engineer is? their main purpose is to mix vocals. producers make beats
no dooode there's different type of Engineers in Music Production itself....let alone REAL Mechanical, Software, Electrical Engineers in real life...
the main purpose of an "Engineer" is to mix vocals....hella false my ninja
does a master engineer or acoustic engineer "main purpose"...is to mix "VOCALS"???? no i dont think so!
FIRST OF ALL
YOU SHOULD BE THE FIRST ONE to know how and stylistically mix your own vocals...
so you can at least have the English to talk to an engineer when you pay for their services you know what you want
SECOND if you want to keep the style of the beat PURE then send stem vocals to the Producer that MADE THAT BEAT ITSELF! then let HIM Mix YOUR VOCALS....to HIS OWN STYLE OF his beat instead of a third-party unless you know them and did your homework and have a significant amount of experience using mixing services of all sorts including your own
@@jasonchu4400 bro I had a stroke trying to read that
It's certainly not underrated
Says he wont use EQ then uses EQ lol
Every time he posts I’m always excited !
Every single time!!!!
no kiz
That means a lot!!
Pause lol but yeah, me too.. but pause 😂
@@emsanchez85 not even pause worthy 🙈🤣
First To Comment Here, Keep Going Uncle Devvon, Mad Respect And Love From South Africa🇿🇦
Also from SA
SZ😄
Also from SA..
Video didn’t help bypass and active in the way of screen 🤦🏾♂️
Bro you just helped me understand wtf wtf. Thank you. Btw nice beard on that face
Dam that song has way too much talking lmao. That dude got too much on his mind
My guy didn’t even flinch when he boosted that frequency. 8:29
This is extremely helpful
This is great. I have no damn idea why I never thought about this... My vocals sometimes have that thin / tinny sound, depending on the song. I'm certain this is the issue.
Yes this will help a lot!!
It’d be dope if you could do a tutorial video recording a full song start to finish using one of your templates. I’m pretty new to the whole recording thing but so far your videos have been helpful, purchased a couple templates of yours to help start my recordings. Keep up the good work tho bro, appreciate what you’re doing!
Do you have or can you make MODERN DipSet / Jim Jones / Juelz Santana vocal chains / templates
I have always wanted to learn how to correctly create a wide vocal sound effect (haas effect) where I would duplicate a vocal track and pan one hard left and the other hard right.. That part is easy, but when I would play it back in mono I would always get some phase cancellation going on.. Have you made a video about this in the past? If so, where would I go to watch it..? If not, would you be able to make one? Thanks and I really appreciate what your doing here. Keep it up! :)
Record two independant takes instead .
That headphone wire is f***ing wit my OCD. I want to reach inside my monitor, grad his headphones and turn them around. Great video.
Cool so after I subtract the eq do I used another eq yo bring it back up?
✨PeRcepTIon✨
My rule of thumb is to keep it natural as possible, today's mixing styles sound more "thinny" due to the preferred brightness and modern microphones, once you start tweaking excessively and cutting or boosting too much you, kill dynamics and ultimately killing the integrity of the human voice , me personally I just rid of unnecessary sub lows and then tame the lows ,(usually with a eq cut at 3 or 500hz and multiband compression to control the low end ) boost at the top and then compress and automate ,the d-ess just a tad .that way the vocal is consistent and balanced across the board
I like your approach!
@@HelpMeDevvon aye man I learned a lot from you and Leslie Braithwaite lol
you literally helped with the problem i been having for months thank you
Interesting how i see this now, i did that to a vocal today. Its a good trick for real✌🇯🇲
this tip as just save my mix...it made my whole song come to life...thank you sooo much, continue posting a lot of these tips,.. u r amazing ❤🔥❤🔥❤🔥
Lord Have mercy HE IS SUCH A GREAT TEACHERRRR!! Thank you!!!!
He says "no Eq'ing" "it's going to be like voodoo" and proceeds to do the most basic eq techniques....useless.
The real answer is room treatment.
You still think the Neumann TLM 103 is the best bang for your buck? You still use it? Is the shockmount worth paying 150 euro more?
The LF cut wasn't necessary since the low end was already attenuated
What about low mid high frequency buss fode vocals and stereo imaging for how implemented.
Its a must and none of you show the reality of this situation which is how real engineers mix why isnt this been shown it must me you dont wnat to or dont know how to facts why isnt this shown to the public 🤔 it taught in music schools you have all the gear you want there no other way. Talk about please Devon ps....i been subscribed and like all you videos 🔥🔥🔥🔥⚓️💯⚓️🔥
Dear brother, how much is the price to make a full song? mixing and mastering.... PLEASE ANSWER ME
I make metal but that original vocal take is great. Nice melodies and flow.
Wtf men......
try to find another room with good acoustic treatment.....
1tone of plugins for nothing....
Much appreciated devvon 🙏 I always run into problems of vocals sounding thin after I've mixed them especially after I apply the C4 then everything goes wrong they start sound thinned out and a little bit distorted it's just too much
Brothers my song is good but after exporting the song music loud and main vocal seams lower in sound. What to do?
this is longtime problem for me. today i will understood . thank you very much Devvon. Wish to success your all things
Devvon, would you record a video about Izotope Nectar 3 and how would you use it with other plugins? I would be so happy. :)
WOW, again, thanks man..
If you have to boost after cutting then why not just initially boost so you don't have to boost
I have a question, whenever I monitor myself in a daw through software monitoring, it sounds funny (like talking into a fan) but when I use my direct monitoring on my interface its sound clean but if I use lets say a EQ the input info, will not show in the EQ when I use direct monitoring. I just want to know is this funny sound when monitoring through software is normal? and is there a way to see feedback in a mixing plugin while using direct monitoring? I don't have room treatment, my monitors are turn all the way down and I use headphone to prevent feedback from the mic and monitors.
I needed this video! I been trying to figure this out for a minute. 🙏🏽 thanks
You're a good teacher, since I star to watch your video I saw evolution on my mix
Thank you!!!
Damnnn bro that analogy before the eq part about loudness and perception made my mind click!!🔥🔥🙏🏻
I know this works because the bypass gave me a migraine (Cut it up to tell the difference)
Another banger 🐐🔥
yo not even a disrespectful comment was just wondering why u use a high retune speed you have such a amazing voice. is it just for the effect?
Hey Man. What kind of Headphones do you use?
Still left u hanging in 2024 😅
EUREKA !!!!! 🍾🏝🔥💯
so basically you cut some of what we hear as the loudest section of the frequency spectrum, it being the lower mid or high part, then we boost up so that it all sounds louder and cohesive now that the loudest part is more unified with the other ends of the EQ?
Can you do a video on how to prevent clicks and pops in vocals in protools, I even turned my buffer settings to 1024 and I monitor through uad console and I’m still getting click noises in the vocal
You should try RX 8 Izotope it has alot of useful noise reduction plugins including a mouth de-click plugin that i use alot
I’ve been doing eq wrong this whole time. 😂 literally the opposite
How come there’s no videos on UA-cam about tin can sounding vocals like the mic sounded fine the other day and now it sounds like there a bunch of reverb and it’s thin This is the closest I found to the correct description someone help!
you've got a good way about you Devvon!
I might not be meant for music because my Brain pays more attention to the quiet sounds and People at that 😂
How did he know my vocals was so thin huh?
fr lol
Брат, мъни тоо губер
Thank you so much for the great video! I love the concept of subtractive EQ!! I had a question though, I’m having trouble hearing/ feeling the difference when you would bypass, how can I train my ear to pick up on this? Or is it a hardware issue and I just need to upgrade?
Absolutely love this video, step by step I could follow everything you explained. The best videos I've watched Thumbs up. P.S. and thank you for the knowledge.
Any chance I could get you to fix a mix I messed up on one of my songs?
that raw vocal was crazy bro 😂 i think your cap that there isn’t anything on it😂
shout out to u for all this info fr
yoooo vroooo wanna collab HML
now we need a tutorial on your
lighting its crazyyyy good
How do your RAW vocals sound like that
Drop the link to this song if it's been released, Issa banger bruh damn
man the cheapest good quality mic you know
Thank you Davon! You helped me.
This is a comment. Liked & Subbed too. Thanks man. :)
BRO THE SUBSCRIBE BUTTON GLOWS WHEN HE SAY IT
man i was vibing to the singing more than the information😂😂
Awesome Thanks Bro 🎉❤❤❤
Man thank you, amazing tutorial definitely appreciated brother 👍🏾
dat boy sounded like michael jackson
wassup with you nice beard 😦😦
With all due respect that is an equalizer tutorial
You are a great teacher bro ... this is definitely your calling
that lighting is 🔥
Awesome mate, love it, cheers
We need a Drake template for Logic!!!
You remind me so much of Chance the Rapper
Thanks for doing these. I can never learn enough!
What’s the best vocal warmer?
Thank you. You made this concept easy to grasp. You' re engaging and that's the sign of a great teacher.
Are you able make your pre-sets for Reaper DAW
which camera do you use to record it?
make song with the Weeknd plz
so i was my own problem afterall, damn
cutting some freq ur busting the ones u dont touch....
How to get big vocals like juicewrld his vocals just sounds so wide and full and I’ve been trying to replicate it mind you I have a ssl 2+ preamp and a Rode NT1 and AT4040
Stacking performances make it more full or should I just boost certain frequencies