How to replace the left rear abs speed sensor on a 2013 Volkswagen Passat vw code 00290

Поділитися
Вставка
  • Опубліковано 3 гру 2024

КОМЕНТАРІ • 22

  • @Ruso_Moose
    @Ruso_Moose 3 місяці тому +1

    Going to fix the speed wheel sensor then immediately drive the VW CC Sport straight into the St Johns River. Appreciate the video ✅

  • @michaelbujaki2462
    @michaelbujaki2462 5 місяців тому +1

    Thanks for showing us where it is.

  • @medicdr0idl
    @medicdr0idl 7 місяців тому +2

    Thanks for the video! Super helpful.
    I spent 30min wiggling my sensor with pliers but couldn’t get it out. Any advice there?

    • @RealityUniverse
      @RealityUniverse  7 місяців тому

      Spray some penetrating oil and keep wiggling it. a pair of vice grips, pull hard.

    • @snowball4416
      @snowball4416 3 місяці тому

      Same, nervous I’m gonna ruin the cable

    • @Burning_redbeard
      @Burning_redbeard 11 днів тому

      I used 2 flathead screwdrivers. 1 top side and one bottom and wiggled it out reasonably easy. Hand and pliers is almost impossible.

  • @DJCanes01
    @DJCanes01 21 день тому +1

    I replaced all 4 on my 2015 vw Passat TDI and all the lights are still on any ideas ?

    • @RealityUniverse
      @RealityUniverse  9 днів тому

      You probably need a scanner that can reset the lights.

  • @wmgardner87
    @wmgardner87 Рік тому +2

    Okay but do I have to remove the tire or can I get around that part?

    • @RealityUniverse
      @RealityUniverse  Рік тому +2

      I think you can get in there without taking off the tire but it’s much easier if you remove it so that when it doesn’t come out easily, you can wiggle it out

    • @michaelbujaki2462
      @michaelbujaki2462 5 місяців тому

      You might if you have a hoist.

  • @i.will.pulverize
    @i.will.pulverize 4 місяці тому +1

    Is the cheap sensor still working?

  • @jonjon9237
    @jonjon9237 Рік тому +1

    How do I know which sensors I need to change ?

    • @RealityUniverse
      @RealityUniverse  Рік тому +1

      A good scanner tells you which one is not working. They are cheap so just buy them all if you don’t have a scanner. The hardest part is to get it well lubricated with a penetrating oil so it comes out easily. You don’t want to break it ;)

  • @i.will.pulverize
    @i.will.pulverize 4 місяці тому

    I don't need any torx bits to do this?

    • @dwreck120981
      @dwreck120981 4 місяці тому

      Other videos I've seen say it's a torx 30 screw

  • @shikin7501
    @shikin7501 Рік тому

    After change speed sensor need to reset?

    • @RealityUniverse
      @RealityUniverse  Рік тому +1

      Yes you must reset with a scanner that works with abs, like this one ☝️www.amazon.com/dp/B07BS7PDC2/ref=cm_sw_r_as_gl_api_gl_i_K4Y1X36AKT4NY82QQ95G?linkCode=ml1&tag=janw.vanderba-20

    • @heyyaitsd1168
      @heyyaitsd1168 Рік тому +1

      @@RealityUniverse I have the same problem but you have to drive the car to see if it comes back on soon as I drove it came back on