How to Fix Yamaha AV Receiver NO HDMI Sound Problem
Вставка
- Опубліковано 24 чер 2023
- Easy to follow tricks on how to fix your Yamaha AV Receiver not outputting any sound when connected with HDMI cable.
↓↓Amazon links↓↓
►Replacement Remote Control for many Yamaha Receivers: amzn.to/3TBhjrx
►Yamaha WXC-50 MusicCast: amzn.to/3FEQvRw
●RECEIVER USED IN THE VIDEO:
►RX-V385 5.1-Channel 4K: amzn.to/3yS5jIP
The Amazon links above are affiliate, which means that I may get a small commission from them if you decide to buy something on their website. This is to support this channel :)
Don't forget to like and subscribe if this was useful to you! - Навчання та стиль
I am from India and I watched your video to setup my Yamaha with LED, very helpful thanks. Internet is full of waste of time videos. Yours precisely to the point. Thanks
damn after an hour of trying to figure this out, you solved my problem < 30 seconds in. Thanks!!!!
I have an RX-V379 and it is experiencing the same problem, can't fix it
Thanks mate. Great explanation. Just in time for the last 30 mins of Top Gun Maverick!
Very systematic explanation ❤❤
Thank you sir! Savedme a lot of pain and suffering
Thank you so much, I almost tust my receiver on the trash after trying almost everything, everything is back to normal and even better ,explained every step as simple as possible thanks again
It worked!! Thanks!!
Thank you. Unfortunately cant get sound on Y-RX-A880 from Beovision Eclipse/LG 55"/.Neither HDMI-ARC/superior cable/, npr other HDMI ,nor Optical...((. Other direction /FROM Yamaha/ works, at least Yamaha screen menu...
Thank you so much, it worked at the first try.
Hey Thank U Thank U so much for this video tutorial helped me a great deal... I was sad for a moment 😢 ,PeaceLove&GodBless
mine was the hdmi cable.
😑
a hint was the red led hdmi arc flicks on/off. and no display on screen.
cable looked good aswell
Let me ask you a question first of all me and you have the same type of receiver if you put the optical cable inside and there's no RED light coming from the optical cable that's connected to the receiver that means the optical is not working on the receiver correct ???? I did everything you said and I'm still not getting no sound there's no red light coming from my receiver does this mean I have to take my receiver back to the store I don't think the optical is working at all because when I had my other receiver and I plugged the optical into the receiver from the television it work this receiver it don't
not totally sure but there should be a red light only on the outgoing side of the optical, so if I'm right there should be no light on the receiving side of the sound
My remote controller wont work, and i cannot go setup menu. Seems like i can only search radio channels with it. My tv remote controlls sound yamaha av receiver. can you help me with that one..😁
My issue is diff. My Yamaha a2a stopped out putting Dolby Atmos. It worked for months now it just stopped
How to connect mic ?
My problem is my sound (Via HDMI) cuts out sporadically about every minute or so, for about 5 seconds. Then it will happen again. However, sometimes the problem will not happen for several days. It seems to happen more when I switch to something like Netflix.
My ps5 seemed to be on while the tv was using UA-cam (not from the ps5) so I turned it off and the Yamaha speaker just stopped making noise. Everything is functioning but it won’t work for neither the tv or ps5. I’m confused on what happened because it was and is still completely fine, other then the no volume
I have a very similar issue. Have you found a solution?
Thank you, Ive been beating myself over the head for 1hr. I needed to turn on "SIMPLINK" 🤦♂
I got a 2010 RS-300 integrated subwoofer speakers
My Yamaha HTR 2064 having very low sound all 5 speakers except wofferr!!!!
What's the exact problem?
Kindly guide....
Thanks for sharing information
India.
Hi, can I change my hdmi control without a remote?
You can't
TY for asking this. I've been wondering why I felt like my settings control was limited. Need to find my remote.....
You can use the mobile application. I also don't have a remote I'm using the Yamaha mobile application for the receivers
i have yamaha avr 861
My receiver is 5 months and it’s making no sound
But beeping continually
I did a hard factory reset
Still nothing.
This is extremely frustrating
Using the optical cable limits sound modes. Thanks but that is not a preferred solution.
Thinks the H/P is on ffs