Escalade handles (smooth painted body with chrome pulls) from that era compliment the chrome GMC door trim nicely. I had a set on my white '05 Silverado for a few years. If you can still find them, they are a direct swap for the black textured Silverado/Sierra handles.
My 06 Yukon with 146K miles leaks a little from the pan gasket. The rear main seal appears fine. Because it is 4x4 it is not enough to drop the front axel. A majority of my oil leak was coming from the oil cooler block off plate.
Definitely enjoying the Sierra content!! Clifford is looking good, any chance we could get a Larry update? Hasn’t had much screen time as of late…?!? Keep it in high gear, just loving the videos!!👍
When the sunroof arms broke in my 2005 avalanche, I couldn’t find any parts either. I ended up in the junkyard dropping headliners, pulled one with good arms, and swapped the whole assembly.
You should be getting an email from GMC about your new truck being in transit. When you do it will get to the dealership the next day… mine was made in Fort Wayne Too. Just a heads up . I’m buying my new Sierra AT4 tomorrow…
I 2nd this. Definitely change the wires. The coil packs you don’t need to unless you are throwing a code for them. O2 sensors are probably definitely most likely bad if ur plugs were. I didn’t have a code for mine and they were bad and I noticed a big difference changing them (they were shot)
Went to Jacks? You must be in 'Bama. I just put plugs and wires on my sierra, but the service engine light is still on. The rear main appears to be leaking too.
How are your rear exhaust manifold bolts on both sides? These are prone to break. Tic..tic..tic.. until warmed up. This would be a great future video. Check Chomper too!
Video suggestion maybe finish grinding the wheels. I don’t know what to call it lol. Driver side looks sick with the silver lip on the edge of the wheel
When do you? Do your oil changes on your 5.3 l? I normally don't change it until 4500 miles. But my engine light came on telling me to change my oil at about 4000.?
With almost 200k miles you should have replaced the plug wires as well. Also I think it’s funny that you made the comment about getting better fuel economy but you are driving around with 12 wides 😂
I have a 2012 CC Z71 and there is no way I can get my mits on the oil filter like you did when you tightened yours up. I've tried multiple times and always end up with a slow leak. I finally started to buy the K&N filters just so I can snug it down using the nut they weld onto the end.
Because 2 of any other generation would require a truck load of money, pun intended. 😁 Seriously, the truck market is insane right now. This gen is really the only one being slept on right now and still somewhat "affordable".
@@sanabria49er Good deal for you. Score! 👍👍👍 These cost him about half that, each, is all I'm saying. 😎 From what I've gathered this is obviously not his full-time gig so he's got to make do with what he gets from the channel, above and beyond his other expenses.
I’m gonna be hitting 90k miles on my F150 fairly soon, and maybe I should changed the spark plugs too. I could possibly wait until it’s 100k and do it, but I dunno.
Im so glad you did that cause every old chevy needs this and no one realizes it except you and i apparently
Escalade handles (smooth painted body with chrome pulls) from that era compliment the chrome GMC door trim nicely. I had a set on my white '05 Silverado for a few years. If you can still find them, they are a direct swap for the black textured Silverado/Sierra handles.
i’ve been looking for mine for a year can’t find any
My 06 Yukon with 146K miles leaks a little from the pan gasket. The rear main seal appears fine. Because it is 4x4 it is not enough to drop the front axel. A majority of my oil leak was coming from the oil cooler block off plate.
Been needing to do a quick tune up on my f150 too, finally getting around to it this weekend! Loving the content!
Definitely enjoying the Sierra content!! Clifford is looking good, any chance we could get a Larry update? Hasn’t had much screen time as of late…?!?
Keep it in high gear, just loving the videos!!👍
Definitely need to lube your oil filter o-ring(Not optional).
That engine bay is really clean for 200k miles
He had just bought from a used car dealership😂 That's why. The top end looked clean and he to clean the bottom end himself lol
Gotta throw the first set of tail lights you put on chomper on Clifford and the clears, will clean it up for sure
I recommend getting a K,N oil filter with a wrench off on the end
When the sunroof arms broke in my 2005 avalanche, I couldn’t find any parts either. I ended up in the junkyard dropping headliners, pulled one with good arms, and swapped the whole assembly.
Thanks for another video. Y'all inspire me with my colorado. STAY WELL FRANKIE L.I.
Trucks real clean I need whoever cleaned that engine bay to do mine on my obs 😭
This is my favorite truck GMC Sierra 4 door Read color
Was looking for tune up video then ran across yours. I got the same truck, same color, got it yesterday.
love seeing your videos in my feed keep the grind going man
Love the blooper at 4:22. I think I need an adult after watching that.
Dude you should totally lift it and put old school mud grapplers on it like you did on Larry, love your videos 😎👍
So excited for my shirt man. Can’t wait
Love the truck it would look nice with the red taillights you took off Chomper.
Damn y’all dealing with bees already in the South!! 12:00-12:14 look like a bee was harassing the camera 😂😂
You should be getting an email from GMC about your new truck being in transit. When you do it will get to the dealership the next day… mine was made in Fort Wayne Too. Just a heads up . I’m buying my new Sierra AT4 tomorrow…
Should change wires when you change plugs. Should clean 02 sensor when doing air filter also.
I 2nd this. Definitely change the wires. The coil packs you don’t need to unless you are throwing a code for them.
O2 sensors are probably definitely most likely bad if ur plugs were. I didn’t have a code for mine and they were bad and I noticed a big difference changing them (they were shot)
Went to Jacks? You must be in 'Bama. I just put plugs and wires on my sierra, but the service engine light is still on. The rear main appears to be leaking too.
What’s your setup on wheels and tires plz?? And did you do leveling kit or lift
Most definitely color match those headlights and grille 💪🏻
Can you do a video of how your trimmed on comper
How are your rear exhaust manifold bolts on both sides?
These are prone to break.
Tic..tic..tic.. until warmed up.
This would be a great future video.
Check Chomper too!
"Sorry that was probably weird" 🤣
Video suggestion maybe finish grinding the wheels. I don’t know what to call it lol. Driver side looks sick with the silver lip on the edge of the wheel
What size r those rims and tires sir ?
Can’t get a shirt big boy here I need 2x love the trucks especially Clifford and chomper
What happened to the truck Where is it you still have it
When do you?
Do your oil changes on your 5.3 l? I normally don't change it until 4500 miles. But my engine light came on telling me to change my oil at about 4000.?
That engine bay is too clean, How did you go about detailing the engine bay? or did you get it already like that?
You definitely ran the crap out of that red light when you got into town. 😮
The tall ac delco oil filter part number is PF61E. I like them suppose to be better for filtration.
With almost 200k miles you should have replaced the plug wires as well. Also I think it’s funny that you made the comment about getting better fuel economy but you are driving around with 12 wides 😂
What do you use to clean the plastic on your engine?
Love the vids boss🤘🏼
Pick n pull for the sunroof stuff possibly
Lmc truck has hard to find parts..late but.some info...great looking truck also
I have a 2012 CC Z71 and there is no way I can get my mits on the oil filter like you did when you tightened yours up. I've tried multiple times and always end up with a slow leak. I finally started to buy the K&N filters just so I can snug it down using the nut they weld onto the end.
Did you have to change the spark wires
You could probably go to the auto wrecker and find some sunroof parts
wow wow wow I’m the the og clifford 👀👀 haha
I wish pa trucks looked this good underneath
Is it windy there too or just in Oregon
Kinda upsetting you don’t have shirts for big fellas like me 😢😂
Was your master cylinder dry or was the fluid just really clear?
Wanna see what a tuner would do with this truck I've got a 99 nbs and in thinking of buying a tuner but I'm iffy on it
What exhaust are going to put on it coll video I like that truck
Your truck runs hot
Clifford needs welds for sure !
Turn the keys up Just for a little lean take flares off and some headlights
Hey man can you make a video on how to get better Mpg on them older trucks 👍 great looking truck
are you gonna finish the last wheel!
Any update on the Volant intake? Very curious 🤔
Try going to a junkyard to find the sun roof parts you need
Naw it would look even firee lifted bro but its whatever you want tho 🔥💯
Are you going to put an exhaust on Clifford
6 inch lift with 37s or drop kit with 24 inch snowflakes.
I came here just for the number 8 plug!!
Love the trucks but why do you have 2 from the same generation?
If I had the money I’d have many
Because 2 of any other generation would require a truck load of money, pun intended. 😁
Seriously, the truck market is insane right now. This gen is really the only one being slept on right now and still somewhat "affordable".
@@Carl_Jr definitely just picked up an 05 for 13k with 105k miles
@@sanabria49er Good deal for you. Score! 👍👍👍
These cost him about half that, each, is all I'm saying. 😎
From what I've gathered this is obviously not his full-time gig so he's got to make do with what he gets from the channel, above and beyond his other expenses.
I’m gonna be hitting 90k miles on my F150 fairly soon, and maybe I should changed the spark plugs too. I could possibly wait until it’s 100k and do it, but I dunno.
Just bought a truck that says the last oil change was at 195k, now it’s at 240k so ima change my oil and filter in the morning
Who owns the red high country that you made a video on?
You know your in Alabama when you eating jacks
1:05 Chase just recorded himself breaking the law.. lol
The video is using green screens for entertainment purposes only no laws were broken.
@@meganhall7795 ohhhh that makes sense
😉
Man, 5.3s LOVE iridium spark plugs imo...
You need to do a single no muffler no resonator no duel
What would glasspacks sound like on that truck?🫣🫣😳
The last plug on the passenger side is a nightmare to get out
I can smell all that brake clean through the phone
ay its name is officially clifford
Good looking truck bro, I enjoy all of you content, when’s your new one gonna land at the dealership??
Keys and shocks, with stock wheels and 35” mud grapplers / q78s.
Or.
Showoff lift / powder coat and old school 14x welds on 33” mud grapps.
Nobody’s gonna say anything about how he ran the red light lmao
It made me cringe a bit. I would at least make an effort to slow down a bit and take time to look 😂
What year is the truck?
Awesome
What kinda mpg do you get in chomper
I found some arms for the sunroof on EBay
Like what I see so far, please lift Clifford so he can live up to his name. Clifford the big red
Nice!!!
Man love the content but really finish sanding the rim on the wheels of Clifford
The side steps😭😭😭😭
Those plugs are always a hassle
Lift it 6 inches, with some wide 35 bfgs
You are lucky you live down there and not up in nd and mn man
Throw the clears on
Definitely need to throw the smoked heads in there and it would make the truck
Do a Cateye swap
Cold air intake led tailgate light bar led lincse plate light
Those rims look like you got whitewall tires. Lol
Anyone else notice the brand new injection rails
@4:20ish.... that was probably weird...lol
take the fender flares off.. make her look clean..
4:19
Can we hear a no cats and a muffler on this one please
probably should run conventional oil considering the age of the truck
why?
Dual battery!!