I would love to get this handlebar but I feel like it will be easier to win the lottery. There are always showing out of stock. Did you purchase it directly from their website?
@@gmen1305 For sure they've become a victim of their success - I recently requested a 36cm wide bar to test - still waiting to hear back. If you can get them, they are good! I'd recommend messaging on instagram and getting the inside scoop on when they might become available again - worked for me first time round
This bar is dope! So your bar is 380 wide 100 length. On the EXS website the model is showing the length starting AFTER the bend of the steerer. What is the ACTUAL measure of the bar, measuring from the center of top tube to the start of the reach? Thanks for the vid boss!
nEis job :-) i live in Germany and are curious on buying the same handlebar... How much did you pay in total ie. including taxes? How much was the tax.
Hi JH Cycles, my front brake hose comes out of the top of my fork, do you remember if there is a hole that goes from the round section that clamps onto the fork through to the handlebar hoods? (I couldnt tell in the video.) Thanks
I think that you could get that to work, there are holes on the underside of the bars - send some pics to EXS on their insta and ask - they’re super helpful
Yeah there are holes under the bars so it seems it will be ok with di2/etap atleast where you only have the brake cables to worry about. Brakecable+shiftcable would probably be a tight fit.
New video coming soon (today or tomorrow) with the bars on the bike. I. Can also confirm it shipped with a go pro fitting attachment but I’m not currently using that
I would love to get this handlebar but I feel like it will be easier to win the lottery. There are always showing out of stock. Did you purchase it directly from their website?
@@germandiazblanco7852 I did - I messaged them on Instagram and they let me know when it was coming back into stock - they were really helpful
Ditto - I have emailed them several times over several months & still waiting - my concern now will be the quality of the bars if/when back in stock
@@gmen1305 For sure they've become a victim of their success - I recently requested a 36cm wide bar to test - still waiting to hear back. If you can get them, they are good! I'd recommend messaging on instagram and getting the inside scoop on when they might become available again - worked for me first time round
I know this is a couple months old, but I just ordered some. They are back in stock if you're still looking.
This bar is dope! So your bar is 380 wide 100 length. On the EXS website the model is showing the length starting AFTER the bend of the steerer. What is the ACTUAL measure of the bar, measuring from the center of top tube to the start of the reach?
Thanks for the vid boss!
The bars are in the shop ready for the build but once they’re on I’ll have a look for you
@@JH_Cycles Can u also tell me once you got it, many thanks!
Hey, I just uploaded a short to the channel so you can see how they measure, hopefully that was what you wanted to see?
@@JH_Cycles Thanks so much. Measure as you would expect - helped a great deal!
No problem - I'll do a review after a few hundred km's@@HarderSoundsChannel
nEis job :-) i live in Germany and are curious on buying the same handlebar... How much did you pay in total ie. including taxes? How much was the tax.
I just paid the retail price, all the taxes were included to the UK
Hi there
I just wanted to know how the handlebars were holding up and do you recommend them?
All good - comparing long term to other integrated bars I’ve had from canyon, roval and other Chinese brands these are just as good. Rock solid.
Hi JH Cycles, my front brake hose comes out of the top of my fork, do you remember if there is a hole that goes from the round section that clamps onto the fork through to the handlebar hoods? (I couldnt tell in the video.) Thanks
I think that you could get that to work, there are holes on the underside of the bars - send some pics to EXS on their insta and ask - they’re super helpful
Is it any good for a Rim Brale bike? or the cable outings are way to internal integration focused?
Yes I think this would work OK but would of course depend on the cable routing - where there’s a will there is always a way
Yeah there are holes under the bars so it seems it will be ok with di2/etap atleast where you only have the brake cables to worry about. Brakecable+shiftcable would probably be a tight fit.
Does anyone know wether Camapa EPS-Cabels fit through?
Sorry - no idea…been about 10 years since I had campy groupsets
Have you installed this on the bike? If so how are they? Also does the outfront mount have an option to add a GoPro mount at the bottom?
The bike is being built this Friday, I'll do an update video! The bars are at the shop now ready for the build but I'll get back to you soon on that
New video coming soon (today or tomorrow) with the bars on the bike. I. Can also confirm it shipped with a go pro fitting attachment but I’m not currently using that
@@JH_Cycles ah fantastic! Looking forward to the video.
Ello! Do you happen to have the diameter for the bar end plugs? Looking to weight weenie them.
Hi, I’m away at the moment but they’re standard - used the same pair of carbon plugs on my last 3 builds
@@JH_Cycles Thanks! Which ones are you using, just so i can reference to the ones I've got?
An eBay special - no brand and weigh about 4g - carbon for the win! @@empyreanw0w0w
My only concern is how noodley they are going to be
I'd drop them a message on Instagram - that's how I connected them and they're super helpful and respond quickly - I'm sure they can advise better