Indeed however it has perfect water penetration and will light it very well remember its not about quantity rather quality 7500 kelvin in the plant version is more than plenty and according to Fluval tech the Led's are viable for at least 5 years but the lamp i used was an aquasky at 6500 at 12 watts for this application is perfect also its RGB
My aqua sky 2.0 is bricked.. airstone bublles got in light. it is not water tight. AND the software crashed during update... going for plant 3.0 to re test
@@CashNeeTick Ok you are correct i think this is on purpose as the main brightness is all the LEDS but individual colour is on a few LEDS i just tried this on all the lights in the room and only 1 out the 5 i have is slightly different but i wonder if you can use the program keys to achieve a brighter show perhaps
I am sorry it is something best seen on the up date as i personally don't use it having said that i have recently done a new video as a response to a question on said pro mode
hi, thanks for the video, but isn't the fluval nano lamp not very powerful? only 1000 lumens and 15 watts for 15 gallons? thanks a lot
Indeed however it has perfect water penetration and will light it very well remember its not about quantity rather quality 7500 kelvin in the plant version is more than plenty and according to Fluval tech the Led's are viable for at least 5 years but the lamp i used was an aquasky at 6500 at 12 watts for this application is perfect also its RGB
Spoke to fluval and have confirmed ip68 status
Good to know
Good to know
So after setting and saving the program for the timer. You just leave it in "auto"?
yes works a charm
My aqua sky 2.0 is bricked.. airstone bublles got in light. it is not water tight. AND the software crashed during update... going for plant 3.0 to re test
Damn sorry to hear that I never had issues with them I have moved said sponge filter mind you
how to turn off light when i press the off button only half light was off
Mine go fully out
great content 🖒
Thank you my friend
Dose this fit a fluval flex 52l??
it can be made to fit but not in original fixings
can get these for the flex 34L
Yes but you will need to measure
Does any one know why only the red Color on mine works ?
may have pressed the programmed button or have it on auto need to move all the sliders to the top on manual set
What is dynamic effect disabled
No other colors will work
@@Killer-bm9gu very strange are you using the remote or the app
Hello, i have the 123L but the colour rotate, is quite pale
Indeed i normally set it to a standard RGB Thanks for the comment
@@AQUAGUYUK how would i have it changing colours? Like deep colours tho
@@CashNeeTick are you using the app on your phone or remote control
@@AQUAGUYUK im using the phone, so bottom right corner is the colour change but the intensity of the RGB is very light
@@CashNeeTick Ok you are correct i think this is on purpose as the main brightness is all the LEDS but individual colour is on a few LEDS i just tried this on all the lights in the room and only 1 out the 5 i have is slightly different but i wonder if you can use the program keys to achieve a brighter show perhaps
didnt even show the pro mode.. thats what I was here for..
I am sorry it is something best seen on the up date as i personally don't use it having said that i have recently done a new video as a response to a question on said pro mode
Best download the app and check it out