Check out the SE3000 EVO on the Spider Farmer website here: www.spider-farmer.com/products/spider-farmer-upgraded-se3000-full-spectrum-led-grow-light/ USA(worldwide): spider-farmer.com Canada: spiderfarmer.ca Europe: spiderfarmer.eu UK: spiderfarmer.co.uk Australia: spiderfarmer.com.au Thailand: spiderfarmer-th.com Use code GEEKS at checkout to get 8% off your entire order!!
Just as an add in tip I’d always use four ratchets instead of dealing with the hanging wire, one big downfall to using the wires it’s that it takes roughly 1ft of space where as four ratchets you can get these types of bar lights roughly 4 inches from the top of your tent. Don’t get me wrong it’s not a big deal if you’re growing smaller plants but if you want a good sized plant to really fill out a tent then go with the four ratchets.
As I mentioned in the video I also do not normally use them, but this particular hanger only takes up 5.5", and while yes that is more than just ratcheting hangers will take up, it also means that you only have to adjust the 2 hangers instead of all 4. I also do not like when the hanging hardware takes up all that space, but I am ok with it in this instance.
@@TheHippieGeeks lol it literally takes the exact same amount of time to hang a light with four ratchets as it does two, you control one with each hand and I’ve done it tons of times and it’s never been slower it’s only slower if you pull each one individually which no one really does anymore so what your saying about the hanging speed really isn’t true at all when I easily do it in my 4x4 with a commercial grade light and I’m not a big person physically at all and it took me the exact same amount of time with four as it did with two. Like I said though if you don’t need that space and have small plants yeah it’s not a big deal but if the plant the person is growing averages 5 - 6 ft tall then yes it matters because your light can physically burn the plants and if you don’t have that extra room to give then you’ll come out with burnt product. Btw I wasn’t aiming my tip directly towards you but in general for any growers or anyone new to growing. Have a great week everyone, Namaste.
Hey Nan I bought the se3000 evo as well been using it a couple months it kicks out savage par I’m running it on he spiderfarmer 2.5x2.5 grow tent and max is 85% giving me 1000- 1150 ppms at approx 24 inches savage light lots more power than it’s pre decesors !!!!so plenty extra par there for adding co2 👍👍👍that I dont use as I’m just a homegrower so no point in an industrial setting yes add co2 but fir just in your house no point wasting money for little to no benefits the co2 u breath out is enough if just growing in your house tried and tested 👍👍👍
I like the options that squeezing this light into a smaller tent for sure. I am always a fan of squeezing the biggest light into the tent that you can, as long as if fits in the budget anyways =)
@ yes we’ll I dunno the aw 3000 evo is in spiderfarmer 2.5x2.5. But I have a 3x3 by ac infinity all in with the evo 4 in there it’s same as the se 3000 just by ac I infinity and it’s lights the 3x3 and flowers it no problem so it is well overpowered in the 2.5 x 2.5 for cannabis but I didn’t feel 200 wats was enough the sf 2000 was gonna b in the little tent but I feel u need 250 wats min for flowering anything decently so that’s y I got the se3000 and it was money well spent 👍I’m mid flower with 1 runtz muffin scrogged out filling the wee 2.5 and it’s banging really is can’t fault the new se3000evo it’s great and luv the digital dial for adjusting power % and comes ready built unlike the pre decesors working well for me here in freezing bloody Scotland lol but it’s great for flowering and dwc as it’s never hot hot here in fact in winter I switch back to cmh lamps in my veg room to get some heat in there the leds aren’t much use to help warm things up like the old hid systems are I can use them to heat the house and light the plants up at the same time 👍👍👍👍👍
Thank you very much for your review. One question to this part 2:30 : is it really that easy to remove the driver from the bars? I am a bit reluctant to press the tabs into the grooves. Because the tabs are slightly bent on the corners and seem to be made out of steel, while the light bar is made of aluminium, I am worried that I will never ever get the driver separated from the light bar again without damaging something. Maybe you can shed some light on this. Thank you.
I am not sure, as this is the only new one that I have gotten so far. We have a few more on the way though, so will let you all know once they get here =) Thank you for taking the time to watch the video!
Can you tell me about your experiences with the temperature development of the lamp? in comparison to the old se 3000 (Samsung LM 301B LEDs) Nice video ! Grettings from Germany
I haven't been able to test the heat differences, especially as I no longer have that older video. This one does get warm, but it doesn't seem to be too crazy.
You are showing a 36x36 area. But the light isn't covering that amount of area. So whats the use almost half the tent isn't being covered by the light.
Check out the SE3000 EVO on the Spider Farmer website here:
www.spider-farmer.com/products/spider-farmer-upgraded-se3000-full-spectrum-led-grow-light/
USA(worldwide): spider-farmer.com
Canada: spiderfarmer.ca
Europe: spiderfarmer.eu
UK: spiderfarmer.co.uk
Australia: spiderfarmer.com.au
Thailand: spiderfarmer-th.com
Use code GEEKS at checkout to get 8% off your entire order!!
Thanks for watching the video!
Thank you so much for explaining the driver mount. I was expecting it to have these orange Clips and I thought they were missing. But all good. Thanks
Yeah, it is a definite change from the old ones =)
Just as an add in tip I’d always use four ratchets instead of dealing with the hanging wire, one big downfall to using the wires it’s that it takes roughly 1ft of space where as four ratchets you can get these types of bar lights roughly 4 inches from the top of your tent. Don’t get me wrong it’s not a big deal if you’re growing smaller plants but if you want a good sized plant to really fill out a tent then go with the four ratchets.
As I mentioned in the video I also do not normally use them, but this particular hanger only takes up 5.5", and while yes that is more than just ratcheting hangers will take up, it also means that you only have to adjust the 2 hangers instead of all 4. I also do not like when the hanging hardware takes up all that space, but I am ok with it in this instance.
@@TheHippieGeeks lol it literally takes the exact same amount of time to hang a light with four ratchets as it does two, you control one with each hand and I’ve done it tons of times and it’s never been slower it’s only slower if you pull each one individually which no one really does anymore so what your saying about the hanging speed really isn’t true at all when I easily do it in my 4x4 with a commercial grade light and I’m not a big person physically at all and it took me the exact same amount of time with four as it did with two. Like I said though if you don’t need that space and have small plants yeah it’s not a big deal but if the plant the person is growing averages 5 - 6 ft tall then yes it matters because your light can physically burn the plants and if you don’t have that extra room to give then you’ll come out with burnt product. Btw I wasn’t aiming my tip directly towards you but in general for any growers or anyone new to growing. Have a great week everyone, Namaste.
Yeah when you use 4 adjustable hangers the light is a pain in the a33 to hand straight and level
This is a pretty nice little light!
I really like it! Thanks for watching =)
I love my spider farmer lights!
They have worked out well for us the last several years for sure, and I really like the direction they seem to be going with the newer version =)
Top 4 Lightproducer
@@fluffi8161 which are your top four?
Keep up the good work
Will do, thanks for watching another one!
Hey Nan I bought the se3000 evo as well been using it a couple months it kicks out savage par I’m running it on he spiderfarmer 2.5x2.5 grow tent and max is 85% giving me 1000- 1150 ppms at approx 24 inches savage light lots more power than it’s pre decesors !!!!so plenty extra par there for adding co2 👍👍👍that I dont use as I’m just a homegrower so no point in an industrial setting yes add co2 but fir just in your house no point wasting money for little to no benefits the co2 u breath out is enough if just growing in your house tried and tested 👍👍👍
I like the options that squeezing this light into a smaller tent for sure. I am always a fan of squeezing the biggest light into the tent that you can, as long as if fits in the budget anyways =)
@ yes we’ll I dunno the aw 3000 evo is in spiderfarmer 2.5x2.5. But I have a 3x3 by ac infinity all in with the evo 4 in there it’s same as the se 3000 just by ac I infinity and it’s lights the 3x3 and flowers it no problem so it is well overpowered in the 2.5 x 2.5 for cannabis but I didn’t feel 200 wats was enough the sf 2000 was gonna b in the little tent but I feel u need 250 wats min for flowering anything decently so that’s y I got the se3000 and it was money well spent 👍I’m mid flower with 1 runtz muffin scrogged out filling the wee 2.5 and it’s banging really is can’t fault the new se3000evo it’s great and luv the digital dial for adjusting power % and comes ready built unlike the pre decesors working well for me here in freezing bloody Scotland lol but it’s great for flowering and dwc as it’s never hot hot here in fact in winter I switch back to cmh lamps in my veg room to get some heat in there the leds aren’t much use to help warm things up like the old hid systems are I can use them to heat the house and light the plants up at the same time 👍👍👍👍👍
I like the digital readout,,
I also like it, makes it easy to set the right light level. Thanks for watching!
Very cool🎉
Thank you, and thanks for watching the video!
Thank you very much for your review. One question to this part 2:30 : is it really that easy to remove the driver from the bars? I am a bit reluctant to press the tabs into the grooves. Because the tabs are slightly bent on the corners and seem to be made out of steel, while the light bar is made of aluminium, I am worried that I will never ever get the driver separated from the light bar again without damaging something. Maybe you can shed some light on this. Thank you.
Are you going to check out any larger lights inside of a 3x3? I am not sure what light to get for my next grow.
I am hoping to be able to check out the SE5000 in this tent in the future =) Thanks for watching!
Does it feel as sturdy as the old versions?
It does fees very sturdy, even though it is a lot lighter now.
Would it be easier to hang with four hangers instead?
It would work with that as well, but I just went with the included hanger this time.
Cool!
Thanks for taking the time to watch the video!
Are all of the bar grow lights being shipped like this now?
I am not sure, as this is the only new one that I have gotten so far. We have a few more on the way though, so will let you all know once they get here =) Thank you for taking the time to watch the video!
I would put that on the back porch 🤣
That would be pretty bright =) Thanks for watching!
You forgot to mention the spider farmer app?
Slave is for daisy chain, AUTO is for the app
Can you tell me about your experiences with the temperature development of the lamp? in comparison to the old se 3000 (Samsung LM 301B LEDs)
Nice video ! Grettings from Germany
I haven't been able to test the heat differences, especially as I no longer have that older video. This one does get warm, but it doesn't seem to be too crazy.
You are showing a 36x36 area.
But the light isn't covering that amount of area.
So whats the use almost half the tent isn't being covered by the light.
Don’t forget about the APP !!!
I thought that you had to have the unreleased controller to use the app with the lights?
@@TheHippieGeeksno
Modo auto is the app
The light has wifi and Bluetooth and you can set times in the app and also has a sunrise and sunset function
@@rbnpt I can't get the app to find the light? It's on auto mode?
@@rbnpt Have you done this without the additional controller?