BulkMan 3D/QueenBee Pro/WorkBee - X axis Building, X&Y Mating, Squaring
Вставка
- Опубліковано 9 бер 2021
- BulkMan 3D/QueenBee Pro/WorkBee - Building X Axis, X&Y Mating, Squaring
In this episode we are going to put together the X Axis, Mount the Y Axis beams, and marry the X and Y to each other. We will finish up with squaring the machine and prepping it for the Z axis.
#Slammerthehawk
stuckeyworx.com/Slammer_The_H...
Please like our page at:
stuckeyworx.com/FaceBook
UA-cam:
stuckeyworx.com/UA-cam
Etsy Shop:
stuckeyworx.com/Etsy_Shop
BulkMan3D Site:
stuckeyworx.com/BulkMan3D_Web...
QueenBee Pro Assembly PDF:
stuckeyworx.com/QueenBee_Pro_PDF
******If you are setting up the full QueenBee Pro Kit the mechanical portion of this build will be the same for you for any size kit you have. You can find all the electrical and programing videos on my WorkBee series. The programing and wiring are the same for both the WorkBee and the QueenBee Mach3 kits of any size. If you have either kit in GRBL most of everything will be the same besides the operating system. I have provided the list bellow for your convenience:
-DIY CNC BulkMan 3D/Workbee Unboxing - Series episode 1
• DIY CNC BulkMan 3D/Wor...
-BulkMan 3D/WorkBee CNC Series episode 2
• Bulkman 3D/WorkBee/Que...
-BulkMan 3D/WorkBee CNC Series episode 3
• Bulkman 3D/WorkBee/Que...
-BulkMan 3D/WorkBee CNC - Series episode 4
• Bulkman 3D/WorkBee/Que...
-WorkBee CNC master control box for Mach 3 setup - Series episode 5
• Bulkman 3D/WorkBee/Que...
-DIY CNC BulkMan 3D/Workbee - Control box setup and wiring - Series episode 6
• Bulkman 3D/WorkBee/Que...
-DIY CNC BulkMan 3D/Workbee - Spindle Wiring - Series episode 7
• Bulkman 3D/WorkBee/Que...
-Motor wiring, Drag chain setup, Spindle hookup - Series episode 8
• Motor wiring, Drag cha...
-Mach3 Setup for Bulkman 3D/Workbee CNC - Series episode 9
• Bulkman 3D/WorkBee/Que...
-Spindle Wiring, Inverter Programing & Mach3. Blukman 3D/Workbee CNC - Series episode 10
• Blukman 3D/Workbee/Que...
-Bulkman 3D/Workbee CNC setup in shop, waste board prep & first project
• Bulkman 3D/WorkBee/Que...
-What the heck is Tramming? Basic CNC Tramming...
• What the heck is Tramm...
-Bulk Man 3D-Workbee CNC Updates, Settings and meeting Slammer
• Bulk Man 3D-WorkBee/Qu...
**Exclusive Stuckey Worx only discounts for BulkMan 3D**
I am pleased to announce the following discounts I have arranged for for all of my viewers. While these discounts are not as much as holiday specials, it is something. We all know every little bit counts. Please enjoy and check back often for the updated discounts when these expire on June 30, 2021.
Codes are different for each sales channel and are not stackable.
Official Website (Bulkman3d.com):
Coupon Code: stuckeyworx0321
Use the coupon code at the checkout for a discount to apply.
AliExpress (www.aliexpress.com/store/1752067)
Coupon Code: 1RAFP5LMOAUP
Use the coupon code at the checkout for a discount to apply.
Ebay: stuckeyworx.com/BulkMan3D_Eba...
You must click through using the above Coupon Link for the discount to apply. If you do not navigate to eBay through this link the discount will not apply.
If you have any questions regarding coupon codes contact the representative on the sales channel you are shopping on (OW, eBay, AE), or you can contact the sales department at sales@bulkman3d.com
Credits:
This film is sponsored by Bulkman 3D. All rights and permissions have been granted by Bulkman 3D to use trademarks, company descriptions, and marketing materials in the making of this film. All agreements made between Stuckey Worx and Bulkman 3D for the making of this film are executed in accordance with the laws of the State of Florida at the time of its making. Any enquiries for Bulkman 3D products and services should be directed to Bulkman 3D directly.
Music:
Takin' Out the Trash by Heuristics Inc. (c) copyright 2008 Licensed under a Creative Commons Attribution license. dig.ccmixter.org/files/heurist... - Наука та технологія
Thanks for making these videos. I'll buy me the plates kit from Aliexpress and have them shipped to Brazil. I'll have to buy all of the extrusions as well as the rails over here otherwise the shipping costs are ridiculous. Hopefully in the next few weeks I'll be watching the videos WHILE trying to assemble mine.
You the man!!! Excellent job. Appreciate the instructional videos.
You are doing a super good job by showing how to mount that cnc and keep on cncing
Hey! I'm very thankful for your videos! I'm in the market for a CNC and I think you're videos have sold me on the Queen bee!
Great video series, I only have the X left to assemble and install for my upgrade to the queen bee 🐝. I was pleased to see how complete the upgrade kit is. I'm hoping to get way more rigidity and it all seems pretty beefy and stiff. I'm also hopping for it to bee a little quieter with less vibration so I don't driver my neighbors insane. Lolol
Great videos, Plenty of details !
Just bought one 1000x1000 from Bulkman3D
Excellent videos! So much easier to understand than the instructions that`s coming from Bulkman. When will you be finishing/uploading the video from the Z-axis?
Where's the update? I'm still wondering how to get the two Y axis beams straight and when to tighten them down.
How come no one is showing the proper way to grease the rails? I have been trying to figure out what grease gun to do both types of fittings. I have found one that will work for the smaller fittings but the other grease nipples are larger and there is no information on it. :(
The dimensions on the websites selling these kits don’t clarify which number is width (gantry) and which is the length (front to back). The workbee main site is the same way. Weird how that was missed. Are the kits reversible or something? I don’t see how they could be
Don't know why bulkman removed the lower HGR15 linear guide in the latest design
Superb! I am seriously thinking of upgrading my Ooznest Workbee.
You can do that with this kit no problem... I’m pretty darn happy with it!
Thanks!
Did you ever so the Z axis video? Don't seem to have any grease nipples on my z carriages, and the holes look to be blanked off so was wondering if these ones are differe t and the PDF is wrong again?
Great video, I am curious if this machine has any backlash with those screw blocks. would like to see how those are setup to reduce backlash. wish they used ballscrews to go with the linear rails.
Hey Dennis thanks for the time and effort you are putting in to teach those of us new to CNC, how to go about building our machines once they arrive. Just a quick question, can you give me any details on your version of the "hockey puck", the 3d printed nut and brass insert, used to get tension on the lead screws.... searched thinga verse but no success.... Thanks in advance. From one Vet to another, thank you again. Subbed and following.
Have question.
If the X Gantry is at the Y=0 position (near to operator standing at the front of the machine), does the spindle stick out of the table? Wondering if i can make a vertical clap at the front of the table so i can machine fancy wood end joints (eg. dovetail)
fantastic Set of videos. I have just ordered my 1510 and will be watching closely. Can you provide some details about your spoil board the spacings etc of the threaded inserts? Thanks in advance Regards Mick
Thank you... I had them spaced out 10cm each. I honestly don’t really use them. They don’t effect things negatively though. If I actually put a system together to better utilize them I’m sure they would work fantastically..
I wanted to see which engines it occupies please ... measurements and which model because there are many and I don't know which one is going to have good torque ... thanks and good work friend
Thanks for all the advice it's been very helpful in getting me setup with my cnc. Any idea when you will be putting the next queenbee video up.
He said its the same as the workbee videos
@@ianmanners3605 so there is no follow-up? Would of been nice to see if its worth doing. value, rigidity, actual work bed size after upgrade as I believe it's smaller than bulkman suggest on the X and how to maintain etc. Would be amazing if you could make one please.
I have built mine and the frame itself measures just over 1000x1000. The work area itsself is maybe 10cm smaller because the space it needs on the gantry mounts in relation to the spindle, its never reaching the perimeter. Hardest part for me was setting up the tension in the screws.
Would recommend getting some kind of bellows to cover the rails.
Hey there, i too have the "PRO" kit - i'm having a bit of trouble getting the waste board & "Y" axis squared up. As you already know, the instructions from bulkman SUCK, and is missing 1 step. My question is- what is the cross measurement from motor / bearing plate to motor / bearing plate?
hello! I get a new workbee with novusun interface.I set all parameters,and ports software(Mach3) is show the working. But axis do nothing. Please help me
i just tried using you coupon code for Bulkman 3d and it has expired. really was looking forward to getting a discount and giving you credit for the sale also.
30 bucks off a $2200 kit. Bulkman is kind tight, eh?
I mean if you don’t want the $30 feel free to send it to me...
The instructions say to use 55mm screws (for the x axis nut blocks) but you need to use them for the motors. Instructions are wrong. 45mm ones are the correct ones IIRC.
There are other 55mm screws so not an issue. I have everything laid out and accounted for. The screws for the motors on the 2-Y axis and X axis call for 60mm not 55mm. The screws for the motor on the Z axis calls for 55mm. These are the screws that were intended for the nut blocks. They might be somewhat long but they do not cause any issues.
@@702marine that's weird - we must have a slightly different kit. My screws for fitting the linear rails were the "version 1" ones. Maybe they simplified in version 2 by replacing the 45mm screws with 55mm.
Could be... I started with the WorkBee 2.2 version...