BulkMan/QueenBee Pro Y-Axis Rail Assemblies Part #1

QueenBee Pro Y Axis Rail Assemblies Part #1
In this two-part episode we are going to cover how to put together both Y axis rail systems. We will detail how to install the linear bearings, the side rails, the install of the grease zerks, the installation and tensioning of the lead screws, as well as the Y axis end plates and the X Axis gantry side plates.
Part #2 Link: • BulkMan/QueenBee Pro Y...
#Slammerthehawk
stuckeyworx.com/Slammer_The_H...
Please like our page at:
stuckeyworx.com/FaceBook
UA-cam:
stuckeyworx.com/UA-cam
Etsy Shop:
stuckeyworx.com/Etsy_Shop
BulkMan3D Site:
stuckeyworx.com/BulkMan3D_Web...
QueenBee Pro Assembly PDF:
stuckeyworx.com/QueenBee_Pro_PDF
**Exclusive Stuckey Worx only discounts for BulkMan 3D**
I am pleased to announce the following discounts I have arranged for for all of my viewers. While these discounts are not as much as holiday specials, it is something. We all know every little bit counts. Please enjoy and check back often for the updated discounts when these expire on June 30, 2021.
Codes are different for each sales channel and are not stackable.
Official Website (Bulkman3d.com):
Coupon Code: stuckeyworx0321
Use the coupon code at the checkout for a discount to apply.
AliExpress (www.aliexpress.com/store/1752067)
Coupon Code: 1RAFP5LMOAUP
Use the coupon code at the checkout for a discount to apply.
eBay (www.ebaystores.com/bulkman3d)
Coupon Link: ebay.us/V2cgPN
You must click through using the above Coupon Link for the discount to apply. If you do not navigate to eBay through this link the discount will not apply.
If you have any questions regarding coupon codes contact the representative on the sales channel you are shopping on (OW, eBay, AE), or you can contact the sales department at [e-mail]
******If you are setting up the full QueenBee Pro Kit the mechanical portion of this build will be the same for you for any size kit you have. You can find all the electrical and programing videos on my WorkBee series. The programing and wiring are the same for both the WorkBee and the QueenBee Mach3 kits of any size. If you have either kit in GRBL most of everything will be the same besides the operating system. I have provided the list bellow for your convenience:
-DIY CNC BulkMan 3D/Workbee Unboxing - Series episode 1
• DIY CNC BulkMan 3D/Wor...
-BulkMan 3D/WorkBee CNC Series episode 2
• Bulkman 3D/WorkBee/Que...
-BulkMan 3D/WorkBee CNC Series episode 3
• Bulkman 3D/WorkBee/Que...
-BulkMan 3D/WorkBee CNC - Series episode 4
• Bulkman 3D/WorkBee/Que...
-WorkBee CNC master control box for Mach 3 setup - Series episode 5
• Bulkman 3D/WorkBee/Que...
-DIY CNC BulkMan 3D/Workbee - Control box setup and wiring - Series episode 6
• Bulkman 3D/WorkBee/Que...
-DIY CNC BulkMan 3D/Workbee - Spindle Wiring - Series episode 7
• Bulkman 3D/WorkBee/Que...
-Motor wiring, Drag chain setup, Spindle hookup - Series episode 8
• Motor wiring, Drag cha...
-Mach3 Setup for Bulkman 3D/Workbee CNC - Series episode 9
• Bulkman 3D/WorkBee/Que...
-Spindle Wiring, Inverter Programing & Mach3. Blukman 3D/Workbee CNC - Series episode 10
• Blukman 3D/Workbee/Que...
-Bulkman 3D/Workbee CNC setup in shop, waste board prep & first project
• Bulkman 3D/WorkBee/Que...
-What the heck is Tramming? Basic CNC Tramming...
• What the heck is Tramm...
-Bulk Man 3D-Workbee CNC Updates, Settings and meeting Slammer
• Bulk Man 3D-WorkBee/Qu...
Credits:
This film is sponsored by Bulkman 3D. All rights and permissions have been granted by Bulkman 3D to use trademarks, company descriptions, and marketing materials in the making of this film. All agreements made between Stuckey Worx and Bulkman 3D for the making of this film are executed in accordance with the laws of the State of Florida at the time of its making. Any enquiries for Bulkman 3D products and services should be directed to Bulkman 3D directly.
Music:
Takin' Out the Trash by Heuristics Inc. (c) copyright 2008 Licensed under a Creative Commons Attribution license. dig.ccmixter.org/files/heurist...

[@TheHrunted]

Bee towards the front! Really though, I guarantee when my kit gets here in a month, I'll remember that detail clear as a bell. Great series! I really appreciate the step by step video guide. Just reading through the instructions made the build seem pretty daunting.

[@IceCreams62]

Before to mount the linear blocks it is a good practice to clean them up from the manufacturing residues using IPA and then grease them. A lot of work but very necessary in my opinion

[@702marine]

They were cleaned. It’s not going to be working in the cleanest environment anyways. That is what the rubber “sweepers” are for that are attached to the bearings. Good maintenance is a worthwhile practice, but some things are unavoidable...

[@Noah.Little]

@@702marine I have the same kit, thanks for the video! Do you know where I can get a grease gun that fits those micro Zerk fittings? I tried putting a fuel line on it and filling it by pressure but I can't get any past that ball. So for now I'm just wiping down the rails with grease each day and hoping the bearings pick up enough to survive.

[@702marine]

You know I haven’t looked yet. I was expecting it to be something I would need to dig for so I just haven’t taken that on yet. I would imagine putting some grease on the rail will work but I wouldn’t think it would be necessary to put it on the entire rail. It just needs to pick it up once.

[@graveurgraveur2691]

Thanks!

[@markfromwestcoastwoodcraft7633]

Will you be covering the Electronic installation and Mach3 config. as part part of this build video series?

[@702marine]

All of that is exactly the same as the WorkBee. All those videos are linked here. If you do all of those electronics and programming like that you will be all set.

[@markfromwestcoastwoodcraft7633]

@@702marine thanks, great content, very thorough.

[@edgar9651]

Is there a reason why you have that huge American flag in the background while you review a sponsored Chinese product?

[@702marine]

Wake up to 2021, everything is from China. You make the best you can out of what’s available. I am a proud American that has served and shed blood for this nation. If you don’t like that or the fact that I have put this together to help others better themselves you can feel free to GO SOMEWHERE ELSE!!

[@cnc3d]

That's not entirely true. The QueenBee upgrade was originally made by us in Australia. :)
A good video by the way.

[@CiaranWhelan]

@@cnc3d good catch