Flex Plate - Old school transmission on Hemi Swap 1972 Cuda

Links on items we used to build our Hemi Engine Skid:
1. Bouchillon 727 Flex plate - www.bouchillonperformance.com...
2. ARP 147-2902 - Flex plate bolts for Hemi www.amazon.com/dp/B006ZLFQ8E/...
3. HF slide hammer tool - www.harborfreight.com/slide-h...
Check us out and see what products we can offer you:
sublimeparts.com
In this video, Blake breaks down what you’ll need to do to get the old school transmission ready to be mated to the Hemi. This works for Hemi Swaps on many older transmissions like the 727, 904, and 46RH. We did make a mistake and used the wrong torque for the flywheel. But we got it back together in good shape to get the transmission installed.
Thanks for your support!
Guys, we are SUPER pumped about finishing the research and design on the new 11 and up Car Hemi QuickRun (formerly QuickHemi) standalone engine harness. We did our best to make them fully plug and play and the easiest to use. Notice how very few connectors are actually needed for it to work and the make up wires to hook up the battery, ground, and fuel pump and you are off to the races!
Thanks for being here with us. You don't know how much you guys mean to us in this incredibly crazy journey we are putting ourselves through LOL! Let's roll baby!
Join uss we go on our journey to Hemi Swap the World. Support us at our store below! We are constantly trying to innovate and add products that would help the Hemi community. Thanks guys!
sublimeparts.com/collections/all
CHECK OUT OUR GOOD FRIENDS AT:
Talking Mopars www.talkingmopars.com/
Big Blocks Garage / bigblocksga. .
Jonny Mopar / jon.defries.5

[@kennethcoble269]

another time saver is to get the bolt pattern matched up on torque convertor and mark it before installing it on the crankshaft . keeps from having to turn the flywheel to match up the bolt pattern to torque convertor

[@TheKenworthys]

I had problems getting that pilot bushing out with a puller... I used the "stuff it with bread" method and it actually worked. Thank you for this series of videos... helps me a great deal.

[@jjmonty8090]

Thnks for the new update!!

[@JuanDominguez-nw8rq]

Nice video well explained, Blake I have a question I'm tuning a 727 tranny on my swap with electronic gas pedal how / what I have to do to hook up my tranny shift linkage?

[@Jeepuschrist98]

Dumb question is any tuning required when removing the clutch pack/manual assembly and swapping in the 727. Anything else needed to run the 727 like kickdown? I have a 392 in my garage trying to work out some kinks.

[@derickhorne713]

I have the 46RE so would that work for that transmission? Not sure if it is the same as the 46RH as stated in the video.

[@claytonhaske]

Yes

[@improvisewitme]

What if you swap out the cam in one of these. Can your ECM still function? Thanks in advance.

[@SUBLIMEparts]

Yes, we the ECM can be tuned for an aftermarket camshaft, no problem. We do them often

[@jgsworkshop9795]

Gentlemen, need a dodge ecm skim delete. How do I get ahold you?

[@SUBLIMEparts]

You can contact [e-mail]

[@tomdamon7208]

I can't understand a word you are saying . You are garbled .

[@SUBLIMEparts]

Yeah, this was filmed a long time ago before our audio improved. We had a specialist attempt to fix it but this is as good as we can get it. We did not want to let that stop us from sharing the info