TeraFlex Install: 2-Door Nebo Roof Rack
Вставка
- Опубліковано 15 кві 2018
- teraflex.com/jk-2dr-nebo-roof...
The purpose-built TeraFlex JK NEBO ROOF RACK SYSTEM incorporates OEM aesthetics and styling with rugged performance to increase cargo carrying capacity for your adventures. The factory finished appearance makes it look at home in the city or off-road in a fully-loaded Rubicon. The low-profile streamlined design has been tuned to reduce air resistance and noise when unloaded.
This rack’s standard main rail kit is compatible with universal accessory mounts and accepts aftermarket crossbars from popular companies - including Thule or Yakima - to provide the widest range of mounting options on the market to carry equipment such as cycling, watersports, and snow sports equipment.
The aluminum extruded main rail utilizes the industry standard 10-series T-slot mounts that readily accept accessory mounting hardware to carry gear such as a shovel, axe, or recovery jack. The optional 4-Piece Cargo Slat Kit (sold separately # 4722052 / # 4722062) provides a platform to hold gear and allows direct mounting of popular sport equipment carriers without need for a load or crossbar.
FITS:
• JK Wrangler (2-door) hardtop models only
INCLUDES:
• Roof rack rails - pair
• Roof rack rail mounts - all 4
SPECIFICATIONS:
Height: 2-3/8” (from crown of hard top)
Width: 43” (between rails)
Length: XX” (between plastic caps)
FEATURES & BENEFITS:
• Sleek low-profile design for unobtrusive aesthetics & clean aerodynamics for a quiet ride
• Composite supports & trim parts are molded to match the subtle curvature of the hardtop
• Extruded aluminum construction for reduced weight
• Extra thick architectural grade UV resistant hard anodizing
• Fasteners coated to OEM specifications for superior corrosion/rust resistance
• Rack cargo load is fully supported by factory sport bar
• Unique easy-to-reach access holes allow for quick hardtop removal w/ only four (4) additional mounting fasteners to loosen
• Four (4) T-slot channels on main rail for a variety of mounting points
• Molded in hooks on slat mounts to secure light loads
• Each individual slat has four (4) 10-series T-slots & a wide center slot for mounting existing carriers & racks
• Static load rating of 850 lbs.
• Dynamic driving load rating of 200 lbs.
• Total Height added: 2-3/8” from the crown of the hardtop
• Total weight added for the main rail kit is 25 lbs. & 24 lbs. w/ the optional 4-Piece Cargo Slat Kit (# 4722052 or # 4722062)
• Hardtop can be hoisted & stored from the rail system
• Rubber gaskets & O-rings w/ shoulder bolts prevent leaking
• Silver finish
• Patent Pending
NOTE:
• Drilling required into factory hardtop.
• Optional 4-Piece Cargo Slat Kit (# 4722052 or # 4722062) sold separately for additional mounting options.
• The TeraFlex Nebo Rack is designed to accommodate the widest range of equipment carriers on the market. These equipment carriers can be attached to the main rails, the cross slats, or by mounting the carriers cross load bars to the main rails. This will provide a safe and secure mounting point that is as low profile as possible to reduce wind noise. Because the TeraFlex Nebo rack utilizes industry standard 10-series T-slots, equipment carrier compatibility is maximized with minimal adapter components required.
• Although it is a relatively easy process to attach these equipment carriers to the Nebo rack, there will still be some customizing that must take place. This is most commonly done through adapters provided by the equipment carrier manufacturer (Thule, Yakima, etc.).
• Please review the Nebo rack instruction file found below prior to purchasing or installing the rack. This will give you some insight into the different mounting configurations and adapters that may be required to mount specific equipment carriers to the Nebo rack.
INSTALL TIME: 7 Hours (complete kit w/ rails & slats) - Авто та транспорт
Installed on JK 2 door. Took about 7 hrs, including slat Kit. Looks great. I like that load goes directly onto sport bars. Low profile clears garage door. Slat ends allow for width adjustment. I did strip one of the slat rail nuts, which I will replace. Slot in top rail slats allows for accessories. Regarding $’s... buy once, cry once. Glad Teraflex figured out this design.
Finally!! I’ve been waiting for this to come out since I saw it on your guys website on the willys tank build 🙌🏼😭
Great rack. Wish they made some accessories for it though.
A wild Dennis appears 20:20 in his natural habitat.
wow how did you get tina fro bobs burgers to narrate?
Glad its available, but probably way too much work for me.
lol yea, probably a 2 day project cause im slow but ima think really hard about the price tag :P
My understanding is this is the only rack that can be used to lift the top off the Jeep. That is a major plus for me.
The same for JL Wrangler 2 doors ????
No, this will not work on the JL at all unfortunately.
Honestly I think I’d pay for a new roof piece with this thing preinstalled than go through all this...
Wanderlust073 that's just laziness talking
So the show a jl at first. Wtf. They need to make this for the jl
No thanks, never drill your top. I'll stick with my GOBI roof rack, thanks.
What! No Dennis? Lame!
No goofy jokes? Double lame!
Did the demonstrator at least have a stupid molestash? 🤯
If not, bring back Dennis!😡
The video is informative... I guess. 🤔