Thank-you so much,I have a new fx maverick which was shooting all over the place,just followed this video and now put 100 pellets through the gun hitting center everytime, really great,thanks very much.
Great work as usual Jake, and very enlightening! It's good to know about the other portential causes of innacuracy, and/or pellet damage, as most of us tend to suspect a faulty mag, or misalinged pellet probe in the fist instance.
I am always looking forward to the next video because they are actually made to be informative and to add knowledge,this video is no exception. Keep the good work up guys 👍🏼👍🏼👍🏼
It's just something we do to all FX barrels sometimes it makes a big difference and sometimes very little it just depends on the port some are better than others 👍
Thanks for posting this! Anything that helps get the pellet into the bore without damage is a good thing! I've always wondered how much damage the pellet gets from being repeatedly bashed by the shuttle and scuffed around the inside of the magazine.
All depends on the mag to be honest, I have had mags that destroy pellets flattening the skirts and damaging the sides, but then other mags are perfect, I think its just how lucky you are. Thanks for watching.
Would be nice, although to be fair no rifle manufacturer really does that sort of thing outside the comp rifle makers, still a nice mod to do though. Thanks for watching.
Hi got a question for you av tried FB and the gun shop can't get an answer maybe you can help I got a brand new FX Crown mk2 177 the transfer port low med and hi doesn't turn is this because its sub 12 or should it turn ?? thanks for any help/ info Derek
Another great video thanks 👍🏻 I have just received an impact M3 sniper .22 (fac) and taken my first 50 shots today! Weather was appalling not a good testing at all! Still, I expected it to group slightly better than it did. I understand these kind of need running/settling in first but after that, what are the first things you would do to achieve greatest accuracy? Thanks.
Impacts are very strange rifles, they take a lot more bedding in that regular ones in my experience, first thing to do would be a proper barrel clean, next find a pellet / slug and tune the speed for the best results, after that if your still not happy a little barrel polish/ experiment with different liners. Thanks for watching
@@sub12airgunners Thanks for sharing your knowledge! I will put a few tins of pellets through first to settle things then see if cleaning has any affect. Thanks again.
Hi, I've bought a new transfer port for my Wildcat hoping to cut down the number of parts with the potential to move or expand differently so I bought the longer brass version that replaces the brass & steel with one peice, I presume there is an O ring to be fitted internally although on first viewing I can't see a recess for it, if there is how do you get it in position so deep inside ?
Nice vid Jeff, thanks. To inspect the pellet after loading maybe you only need to remove the mag but the rod could very easily damage head, don’t you think? Cheers and thanks again. John.
The rod can damage the head, but to be honest the main thing we are looking for is damage to the sides and skirt of the pellet, the head face is quite unimportant, in this test anyway, Thanks for watching
Excellent video. Just a quick question how easy is it to remove the transfer port with the loctite on the thread and do you put some back on when you reassemble? Keep up the great work.
Hi another great video, You transfer port hole in the barrel looks to be oval have you done that or is it a bought item? On my dream tac it is just a round hole. It look very restricted!!
If its a .22 then it will be very restricted, but this is the .177 port and its standard, they restrict the hole so you can swap between calibers without altering settings on the rifles in sub 12. Thanks for watching.
Hello again from a novice air gunner. I am going to install a adjustment for hammer spring in my Impact but when I try to pull out the C3 it feels spring loaded and just want to spring back in again. Is that something that is on sub 12 and in my case 10 joule? When I look at others doing the same thing they just pull the rod out. Is it something in the plenum to help with low power?
@@sub12airgunners So if I upgrade my Impact with power plenum and higher power I can take it away? is it ok to leave it in? I only have 2mm hole in the transfer port is it the same in sub 12`?
@@lassesarnhult9283you would leave it out when upgrading to the power plenum, its not needed. Yes the 2mm hole is standard for .22 sub 12 it allows you to swap between .177 and .22 without touching the power settings. Thanks for watching.
@@sub12airgunners i took it apart today and I realized there were no hammer weight. Is it so in sub 12 also? I was going to install slug power kit. Hmm Do you know what hammer weight to buy for an impact M3
Great video!!😁. That also makes a huge difference on any air rifle that's being pellet picky!!! Now to figure out a tool for the breach putting lol,,. Shrink the o ring on the way in and let go when ya pull it out👍. You'll make millions lol
They should be standard now, the new liners have it laser engraved on the side of the liner, older rifles won't have the markings but the newer liners have the superior markings on the barrel. Thanks for watching
Great video as usual, tho if we wanna be nitpicky, after all the work carefully polishing brass, it might not be the best idea to use a sharp steel tipped pin to push the inner o-ring in, or be very careful not to touch any polished brass at all. Every contact between steel and brass, brass loses. Maybe as a precaution use a wooden pick? For like shish kebab/shashlik. Yes splinters would be a B. But they can be cleaned out and you can touch the polished brass as much you want.
If your careful its not something to worry about, your not poking the brass just the o ring, you can use tooth pics or cocktail sticks if your worried, but I get them out with a sharp pointy thing and put them back with the same tool as long as your not putting excess pressure or trying to force it these no chance of slipping and even doing it for the camera is pretty easy. Thanks for watching.
Kind of bad QC leaving an expensive weapon to the customer in that state. But they know people like to do tweaks like this, taking the job off fx's shoulders.
Your channel is the only one that provides detailed advice to troubleshoot inaccuracy issues. thank you for that !
thanks for watching, glad it help people👍
Thank-you so much,I have a new fx maverick which was shooting all over the place,just followed this video and now put 100 pellets through the gun hitting center everytime, really great,thanks very much.
That's great glad you got it sorted and the vid helped 👍
Great work as usual Jake, and very enlightening! It's good to know about the other portential causes of innacuracy, and/or pellet damage, as most of us tend to suspect a faulty mag, or misalinged pellet probe in the fist instance.
Thanks Tony, yeah it can be a lot of different factors, thanks for watching.
Just about to fit a new transfer port on my M3 and had a look down it could not believe the burs. thanks for the vid.
yes some of them are shocking glad it helped 😁
It’s great getting your videos when I’m bored👍
Thanks glad you like them, Thanks for watching
When I done this to my crown and impact I could see the difference immediately, great video jake. 👍👍
Thanks Phil, its a surprisingly effective little mod. Thanks for watching
I am always looking forward to the next video because they are actually made to be informative and to add knowledge,this video is no exception. Keep the good work up guys
👍🏼👍🏼👍🏼
Thanks mate, glad to be of help. Thanks for watching.
Nice job. Would have been good to seen footage of the accuracy of pellets beforehand and after the polishing to see the difference.
It's just something we do to all FX barrels sometimes it makes a big difference and sometimes very little it just depends on the port some are better than others 👍
Good tips and explained well. Couldn't really see an issue with the steel and brass.
Thanks for watching
another brilliant video guys and this alone will solve a lot of peoples accuracy issues on there M3’s..👍
Thanks much appreciated, Thanks for watching
Thanks for posting this! Anything that helps get the pellet into the bore without damage is a good thing! I've always wondered how much damage the pellet gets from being repeatedly bashed by the shuttle and scuffed around the inside of the magazine.
All depends on the mag to be honest, I have had mags that destroy pellets flattening the skirts and damaging the sides, but then other mags are perfect, I think its just how lucky you are. Thanks for watching.
For a £1500 quid air rifle I would want this done at factory. Enlightening.
Would be nice, although to be fair no rifle manufacturer really does that sort of thing outside the comp rifle makers, still a nice mod to do though. Thanks for watching.
I had bad issues with accuracy due to this, polishing it does wonders.
Its the little things that add up, really does help on some rifles. Thanks for watching
Another great and informative video. Are you still making the brass FX reg pistons, if so can you let me know where I can get a couple.
Having issues removing the transfer port. Heated it up to loosen the glue but it just rotates in my vice. Any suggestions?
Im just wondering! When i load pellet and remove the liner, why is that the pellet skirt is sticking out of the liner.. all my fx airgun
Hi got a question for you av tried FB and the gun shop can't get an answer maybe you can help I got a brand new FX Crown mk2 177 the transfer port low med and hi doesn't turn is this because its sub 12 or should it turn ?? thanks for any help/ info Derek
Fantastically explained mate😊👌🇬🇧❤️
Glad you liked it
Another great video thanks 👍🏻
I have just received an impact M3 sniper .22 (fac) and taken my first 50 shots today! Weather was appalling not a good testing at all! Still, I expected it to group slightly better than it did.
I understand these kind of need running/settling in first but after that, what are the first things you would do to achieve greatest accuracy?
Thanks.
Impacts are very strange rifles, they take a lot more bedding in that regular ones in my experience, first thing to do would be a proper barrel clean, next find a pellet / slug and tune the speed for the best results, after that if your still not happy a little barrel polish/ experiment with different liners. Thanks for watching
@@sub12airgunners
Thanks for sharing your knowledge! I will put a few tins of pellets through first to settle things then see if cleaning has any affect.
Thanks again.
Hi,
I've bought a new transfer port for my Wildcat hoping to cut down the number of parts with the potential to move or expand differently so I bought the longer brass version that replaces the brass & steel with one peice, I presume there is an O ring to be fitted internally although on first viewing I can't see a recess for it, if there is how do you get it in position so deep inside ?
i think that these have a very slight taper so no need for the o ring 😀
I'm glad to hear it, Thanks.@@sub12airgunners
Hi
Great content. Do you work on other peoples guns ? 😊 thanks
We can't work of other people rifles unfortunately, Thanks for the interest though. Thanks for watching.
@@sub12airgunners shame. You seem the type of person I would 100% trust to do a top job! Take care 👍
What diameter size that tranfer port.?
Nice vid Jeff, thanks. To inspect the pellet after loading maybe you only need to remove the mag but the rod could very easily damage head, don’t you think?
Cheers and thanks again.
John.
The rod can damage the head, but to be honest the main thing we are looking for is damage to the sides and skirt of the pellet, the head face is quite unimportant, in this test anyway, Thanks for watching
@@sub12airgunners Yep, agreed, thanks.
Excellent video. Just a quick question how easy is it to remove the transfer port with the loctite on the thread and do you put some back on when you reassemble? Keep up the great work.
Ps forgot to mention my pellets are very jerky when they are pushed in.
Hi another great video, You transfer port hole in the barrel looks to be oval have you done that or is it a bought item? On my dream tac it is just a round hole. It look very restricted!!
If its a .22 then it will be very restricted, but this is the .177 port and its standard, they restrict the hole so you can swap between calibers without altering settings on the rifles in sub 12. Thanks for watching.
Just when i thought i have done all the mods on my FX guns you show us this mate lol
Thanks, always little ways to improve the rifles, makes a big difference. Thanks for watching.
Hello again from a novice air gunner. I am going to install a adjustment for hammer spring in my Impact but when I try to pull out the C3 it feels spring loaded and just want to spring back in again. Is that something that is on sub 12 and in my case 10 joule? When I look at others doing the same thing they just pull the rod out. Is it something in the plenum to help with low power?
Yeah the low power models have a valve return spring in the plenum, so its spring loaded. On the fac models they don't have this. Thanks for watching.
@@sub12airgunners So if I upgrade my Impact with power plenum and higher power I can take it away? is it ok to leave it in? I only have 2mm hole in the transfer port is it the same in sub 12`?
@@lassesarnhult9283you would leave it out when upgrading to the power plenum, its not needed. Yes the 2mm hole is standard for .22 sub 12 it allows you to swap between .177 and .22 without touching the power settings. Thanks for watching.
@@sub12airgunners i took it apart today and I realized there were no hammer weight. Is it so in sub 12 also? I was going to install slug power kit. Hmm Do you know what hammer weight to buy for an impact M3
@@sub12airgunners I need help. What size is it for the hex key to get the pellet probe out? 1mm to small and 1.5 to big on my impact M3
Great video!!😁. That also makes a huge difference on any air rifle that's being pellet picky!!! Now to figure out a tool for the breach putting lol,,. Shrink the o ring on the way in and let go when ya pull it out👍. You'll make millions lol
Thanks every little helps, Thanks for watching
FX Smooth Twist X Superior Liners are not standard for all models, some use STX in .177. I wonder why.
They should be standard now, the new liners have it laser engraved on the side of the liner, older rifles won't have the markings but the newer liners have the superior markings on the barrel. Thanks for watching
Thanks, FX need to update their website.
@@Jknox They are probably just getting rid of all the old liners first, then when they run out it will be updated. Thanks for watching
What is the size on your transfer port?
from memory it's 3.4 x 4.8😁
What caliber is it?
Great video as usual, tho if we wanna be nitpicky, after all the work carefully polishing brass, it might not be the best idea to use a sharp steel tipped pin to push the inner o-ring in, or be very careful not to touch any polished brass at all.
Every contact between steel and brass, brass loses.
Maybe as a precaution use a wooden pick? For like shish kebab/shashlik.
Yes splinters would be a B.
But they can be cleaned out and you can touch the polished brass as much you want.
plastic knitting needle works a treat 😀 👍
If your careful its not something to worry about, your not poking the brass just the o ring, you can use tooth pics or cocktail sticks if your worried, but I get them out with a sharp pointy thing and put them back with the same tool as long as your not putting excess pressure or trying to force it these no chance of slipping and even doing it for the camera is pretty easy. Thanks for watching.
@@marcdavis2840 yeah that sounds perfect for the the task hehe
@@sub12airgunners and no thank you, getting me all inspired to get back into pellet rifles and tuning them 😋
i was doing well, right up to the point you said undo the jam nut. this is not going to go well
Attention to detail 😀
thank you, we try to address all the simple thing first all the little bits add up 😀
Kind of bad QC leaving an expensive weapon to the customer in that state.
But they know people like to do tweaks like this, taking the job off fx's shoulders.
yes i agree 👍
Awesome tip thanks for sharing bsafe buddy
No problem thanks for watching
👍🏻👍🏻
Приветствую. Огонь. Всех благ
Thanks for watching
😁👌