Thank you for this information . You are the man . Just wish I could get my power plenum upgrade ,been trying for 8 months now . Loosing hope , wondering if it is real . Any thoughts ?
.in the past we used mos2 powder to get a dry hd lube at metal to metal parts in a springer gun ,rub it in the metal surface ,maybe its a good idea for the hammer system
Ernest Great UA-cam. Question: do you have a UA-cam showing how to get the hammer assembly out of the M3? Also what are the items we need to look for when removing and reinstalling the hammer assembly. I'm currently having ES issues on my M3 .22 700mm barrel. Thanks for your help.
Earnest, this won't void my warranty in any way will it? Utah was already trying to tell me they'd void my warranty if I converted my 35 to any other caliber without sending them the whole gun. Just looking to keep them off my ass. Thanks and awesome work! If anyone knows, please let me know. Thanks!
ernest, help. My power wheel fine adjustment hex screw at the side of the rifle moves while i shoot. I tune it to maximum (at max at the power wheel) and after a few magazines the hex screw has backed out again it seems. I didnt have good lighting for the chrony but accuracy was all over the place at 100 yards today.... i use the tiny hex wrench to set it to a very high setting and after 2 mags it has backed to a lower setting. I fear i have to use some kind of locking nut in the middle of the slider (in front of the power wheel towards the barrel). Is this a normal issue or is there something wrong with my rifle? I bought it used a few weeks ago... the threads seem fine because it is adjusting while i turn the screw. thanks for any input... stay safe.
the thread at the end of the rod - where it's threaded - broke off inside the part that hits the valve ball under the adjustment, my c3 bumper was completely missing and I guess it hammered it to death. Do you know where I could get these parts so I can start shooting again? :) FX Impact MK1
So how would you polish these parts? Stick them in the lathe, first polish with 2k/3k wet/dry paper and then final treatment with fine polishing compound?
Ha! Another funny practical joke Ernest! This one is almost as funny as the one about polishing the outside of your barrel liner to get better accuracy! I'm laughing so hard my side hurts just thinking about someone actually doing this! Ha ha ha!
Why is this a joke it doesn't work or what I'm new to pcp airguns I have a fx impact mk2 .. I get the polishing the outside of the barrel that ain't gonna do shit for accuracy or consistency ...I guess what I'm asking is ernest is just doing this for nothing or not nothing it looks clean ....but it doesn't make the air gun better or more consistent ... plz I won't to know ... help me out bro
Hi Ernest, i think you are in the end of the end of the optimisation of the hammerspring system. No lube or polish, Es goes up. Polish + Light lube, Es goes down. Too much Lube Es goes up again.. lol but nice and cool work here
@@chrisfigueroa3361 because it's some details that make small differences.. and after X number of shoot, you will have to do it again (dismount, polish, remount) so globaly it's a improvement but not really reliable.
i found that ballistol tends to get to thicken en gets greasy sticky ,its has also a barrel cleaning purpose .how will it effect o rings ? i,use instead the accid free gumfree sewing machine oil on small moving parts
@@rockyourfaceoff2 if oli contains esters.its tru .car engines depends on rubber seals and oil. No problem there and modern rubbers types are most oil resistent
@@peteralexben i have liquid silicone of different viscosity from RC shock oil bottles. I think I'll use that on everything. It's not aerosols so it contains 0 Petroleum Distillates to mess with anything.
Won’t it self polish over time to a certain degree , say a 1 year old impact should be fully worn in ??, and then give better stability with the FPS, thanks
Ernest Rowe u didn’t understand, I don’t mean a old impact that isn’t working correctly, I mean a good few month old impact would surly polish itself slightly as parts are used, but yea I do know what u mean polishing and wear is different
I do believe all fx products are super fine finished because MADE IN SWEDEN, it’s expensive to settle again your sweet spot you need to harmonize again hahahahaha
I think I did a pretty good job cuz mine looks shinier then your ernest jk but it is very shiny hope this works my gun was shooting very good already by doing this hope it shoots better ty buddy bsafe
@@rockyourfaceoff2 the same I didn't see or hear anything different i just know in my head that its shinny lol gun shoot good before and now so no harm done
After spending so much money on these guns they should be polished already from factory
These videos are very addictive, just got a .22 Impact and ready to tweak it, thanks Ernest
Show us how you polish these parts so we don’t mess them up!
Dc8cappie --> use 3M polishing clothes they don’t remove material just polish 800, 1200 and 3000 grit use hands, can’t mess it up!
@@ernestrowe5061 thanks for you valuble input and your awsome turtorials 👍 big up from sweden
Thank you for this information . You are the man . Just wish I could get my power plenum upgrade ,been trying for 8 months now . Loosing hope , wondering if it is real . Any thoughts ?
Thanks Ernest (airgun Master)
.in the past we used mos2 powder to get a dry hd lube at metal to metal parts in a springer gun ,rub it in the metal surface ,maybe its a good idea for the hammer system
Just got my polishing cloth 3m am about to polished to a mirror thanks buddy for the info brotha
Ernest Great UA-cam. Question: do you have a UA-cam showing how to get the hammer assembly out of the M3? Also what are the items we need to look for when removing and reinstalling the hammer assembly. I'm currently having ES issues on my M3 .22 700mm barrel. Thanks for your help.
This is the answer to my question 😁😁😁 thank you sir! Kepp safe
AH HA!!!!! Thank you very much!!! Wished I'd have known that 2 years ago!!!! Would have saved a 1000 pellets!!!!
Earnest, this won't void my warranty in any way will it? Utah was already trying to tell me they'd void my warranty if I converted my 35 to any other caliber without sending them the whole gun. Just looking to keep them off my ass. Thanks and awesome work!
If anyone knows, please let me know. Thanks!
Have you tried any dry lube, e.g. MoS2?
Sir Ernie you main to say parts of fx airgun not polished it?
ernest, help. My power wheel fine adjustment hex screw at the side of the rifle moves while i shoot. I tune it to maximum (at max at the power wheel) and after a few magazines the hex screw has backed out again it seems. I didnt have good lighting for the chrony but accuracy was all over the place at 100 yards today.... i use the tiny hex wrench to set it to a very high setting and after 2 mags it has backed to a lower setting. I fear i have to use some kind of locking nut in the middle of the slider (in front of the power wheel towards the barrel). Is this a normal issue or is there something wrong with my rifle? I bought it used a few weeks ago... the threads seem fine because it is adjusting while i turn the screw. thanks for any input... stay safe.
the thread at the end of the rod - where it's threaded - broke off inside the part that hits the valve ball under the adjustment, my c3 bumper was completely missing and I guess it hammered it to death. Do you know where I could get these parts so I can start shooting again? :) FX Impact MK1
The best
When measuring the c1 where should the power wheel be set..
Measure the portion size with Vernier tosee as well.
So how would you polish these parts? Stick them in the lathe, first polish with 2k/3k wet/dry paper and then final treatment with fine polishing compound?
jgrimsta >>>>>3m fiber cloth 800, 1200, 3000 and 8000 grits for me
Thanks for the information. You could not give me dimensions from these deltals. if I may.
what do you use to polish with?
Can you do a video of this for Dreamline too?
Ha! Another funny practical joke Ernest! This one is almost as funny as the one about polishing the outside of your barrel liner to get better accuracy! I'm laughing so hard my side hurts just thinking about someone actually doing this! Ha ha ha!
Why is this a joke it doesn't work or what I'm new to pcp airguns I have a fx impact mk2 .. I get the polishing the outside of the barrel that ain't gonna do shit for accuracy or consistency ...I guess what I'm asking is ernest is just doing this for nothing or not nothing it looks clean ....but it doesn't make the air gun better or more consistent ... plz I won't to know ... help me out bro
Can you use hBn as lube on the spring and hammer?
Hi Ernest, i think you are in the end of the end of the optimisation of the hammerspring system. No lube or polish, Es goes up. Polish + Light lube, Es goes down. Too much Lube Es goes up again.. lol but nice and cool work here
Explain why
@@chrisfigueroa3361 because it's some details that make small differences.. and after X number of shoot, you will have to do it again (dismount, polish, remount) so globaly it's a improvement but not really reliable.
Hi Ernest those washer for hammer spring and hammer weight washer where can I get those from?
Sergeant Mao order from FXUSA
@@ernestrowe5061 hi brother I was trying order on FX and they can’t seem too figure what it is. Do you know the schematic diagram number too it.
Ernest rowe when you say polishing cloth 3000 grit is this the Same As wet and dry??
No, 3m cloth -- polish without removing material
Can you link what you use? I can't find it on searches. Thanks
@@craigwoodgate5213 --> www.ebay.com/itm/192522373650
i found that ballistol tends to get to thicken en gets greasy sticky ,its has also a barrel cleaning purpose .how will it effect o rings ? i,use instead the accid free gumfree sewing machine oil on small moving parts
I'm sure you already know this but oil decomposes rubber. Personally I like a light film of silicone. If I'm incorrect, someone let me know.
@@rockyourfaceoff2 if oli contains esters.its tru .car engines depends on rubber seals and oil. No problem there and modern rubbers types are most oil resistent
@@peteralexben well I guess I learned something today. Thank you
@@rockyourfaceoff2 dont use oil in the high pressure parts of een springer ,gasram .pneumatic or pcp there you use a little silicon oil
@@peteralexben i have liquid silicone of different viscosity from RC shock oil bottles. I think I'll use that on everything. It's not aerosols so it contains 0 Petroleum Distillates to mess with anything.
Where can I get 3m polish cloth
Won’t it self polish over time to a certain degree , say a 1 year old impact should be fully worn in ??, and then give better stability with the FPS, thanks
Polishing and worn out parts are not the same- you need to inspect !
Ernest Rowe u didn’t understand, I don’t mean a old impact that isn’t working correctly, I mean a good few month old impact would surly polish itself slightly as parts are used, but yea I do know what u mean polishing and wear is different
Greentruth420 - new,old and worn out this process improves ES
Measure carefully every part.
👍🙏🤦
😅
I do believe all fx products are super fine finished because MADE IN SWEDEN, it’s expensive to settle again your sweet spot you need to harmonize again hahahahaha
I think I did a pretty good job cuz mine looks shinier then your ernest jk but it is very shiny hope this works my gun was shooting very good already by doing this hope it shoots better ty buddy bsafe
Results after polish compared to before?
@@rockyourfaceoff2 the same I didn't see or hear anything different i just know in my head that its shinny lol gun shoot good before and now so no harm done
@@chrisfigueroa3361 thanks for letting me know! I may get to it once my warranty expires
😁😁😁😁
Show hos you policy