Replace Upper Control Arms - 2003 GMC Savana 3500 by
Вставка
- Опубліковано 20 сер 2024
- The tire shop pointed out that I needed upper control arms, so here is how I replaced them on my 2003 GMC Savana 3500 cargo van. A big thanks to Mike the @TheDisgruntledMechanic for providing a set of instructions before hand. Check out his channel using the link below.
Disgruntled Mechanic Channel: / @thedisgruntledmechanic
Upper Control Arms on Amazon:
Left: amzn.to/2CeGNoo
Right: amzn.to/2Cfs4cC
www.gettinjunkd...
Please comment, like, subscribe and share!
You can also fine me on Twitter & Instagram - @GettinJunkDone
Use this link to shop on Amazon, while supporting the channel!:
www.amazon.com...
Bugout Truck Build: • Bug Out Truck Build by...
Tool Reviews: • @GettinJunkDone Talks ...
#UpperControlArms #BallJoints #Replace
Hey everyone, thanks for watching and I hope this video helped! You might be interested in some of my other auto repair videos. You can find them by using the playlist link below.
ua-cam.com/play/PLHRSPnh4bEkx-mdi5iz9fX6w5DNxUnEV5.html
You totally showed me how to manage a dually front hub removal. Thanks! Had the wheel off and felt lost for a minute.
0
AND like u, I read instructions. And I look for badass videos like yours, sir. Thank you
Thanks brother! Right on!
Glad im replacing the the entire front end after seeing your video . I see that the upper control arm bolt is a pain with the spring installed. I won't have that issue if I pull it all out . Thanks
Great job!!!😊
Thanks for the shout out man!
You Got It! It was the least I could do after all this time!
@@GettinJunkDone Any time I can help just ask!!
Great job
Am in the same situation
I will do my on my van👍
Dude your bad ass. Im subbing
Thanks brother!
Just a tip for future use, there's a cut out on the other side of the shock/spring tower on the bolt that's easier to get out and you can put the upper control arm bolt that's tough to get out in from the other direction (nut on the spring side)and use an extension and swivel socket to put the nut back on through the cut out on the other side. That makes the alignment easier. Hope that makes sense.
Thank you because it is a mug to get out
Nice..job. Just finished my van. I dropped the shock....too many F-bombs with it up. Plus its almost 100F in the shop and my internal pressure regulator is set at low today 😤
Thanks for your video! I never did an upper control arm job and you gave me great Direction and insight , I'm going to have at it , have my curse words prepared
Thank u for not being a pro, none of us are pros and learning from a fellow non pro makes a difference in a big way.
Thanks for this. Getting ready to do one on my van also. I dread that one bolt though...lol
You'll get it!
The requirements of a home mechanic are dirty hands (no gloves) and four lettered words. Thanks for the video.
You damn rite!
What is the torque spec for the nuts? And did you have to replace the whole wishbone arm?
Thanks! Need to d my ‘05 Express 2500. clunking just started last week. Any other suggestions?
Clunking could be many different things. Hard to say.
you talk to dang much....and can you not afford gloves or do you choose not to wear them?
Chose not to wear them this time. I guess I should've checked with you first?
Thanks for watching!
instead of being rude maybe just offer a solution or advice. Talking to someone the way you talk will actually produce the opposite results.
@@JLE1177 this is a comment section not an advice/solution section. Lmao 🤣
@@garrettmersman Thats much better. Keep that up and you’ll find ppl are much nicer.