Remove Control Arm Bushings W/OUT a Hydraulic Press | Chevy El Camino Restoration
Вставка
- Опубліковано 1 чер 2024
- Is it possible to remove control arm bushings without a press? Find out how we do it in the Budget Build Garage. We'll show you 2 easy (and cheap) ways to remove control arm bushings and how to install bushings without a hydraulic press. If you are looking to replace control arm bushings, whether it be how to replace upper control arm bushings, or how to replace lower control arm bushings watch this video first and save yourself time and money. We show you exactly how to press the old ones out and press the new ones in with basic hand tools. This job is fast and easy. Watch now to learn how to press bushings without a press, and what you'll need to remove control arm bushings without a press.
List of items used in this video:
C-Clamp (6 inches): amzn.to/3uX1yhT
Full Thread Hex Tap Bolts: amzn.to/3v2mcx2
Nut and Washer Bundle: amzn.to/30kf69k
PB Blaster: amzn.to/3rmgiEN
If you're looking for an all-in-one kit to do this job I highly recommend this Ball Joint and U Joint Service Set: amzn.to/3ee2uZn
Get inexpensive bushings here: amzn.to/30kq4eI
Don't forget to like this video and subscribe to our channel.
To see the full build so far on the El Camino and more Tech Tips check out our other videos.
Be sure to Follow us on Instagram and Facebook.
Instagram:
/ budget_build_garage
Facebook:
/ budgetbuild.garage.3 - Авто та транспорт
Taylor, this was legit. I just spent $6 at the hardware store, and used a socket and tools from the house. After about a week of trying to source proper tools to rent at the parts store. The second method took me like 10 minutes to remove both sides. Thanks.
Spent $100 on tools with no success and used your two methods and succeeded in a few minutes. Thanks!!!!!
What I got from this is that with a long bolt, 2 washers, 2 sockets, and a nut I've got the ultimate bushing tool.
Indeed bro 😏👍
I ♥ subaru. I bought a control arm that came with a ball joint and brand new bushings prepressed today. For $110. And had it all replaced in like an hour and a half.
Thumbs up for the Monkey D Luffy poster in back ground...as well as the great tips.
You just saved me $75 on a bushing press. I take the wife out for dinner tonight with the extra coin in pocket. Thanks!
The one and only time I told my wife how much I saved repairing her car myself, $200 bucks was missing from my wallet the next day and my wife came home with a perm and some new shoes.
Now I just hire a mechanic to work on her car.
@@bartprice3439LMAO 🤣🤣🤣🤣🤣🤣
I've been married 30 years. Acquiesce...kinda...
Try this. "Hey, would you make me a sammich? Hand her $100 (small town) Then you can go shopping.".
LOOK BEFORE YOU SUGGEST NAILS.
NEVER SAY GET YOUR HAIR DONE.
I can eat, get the house to myself. I wash parts in the dish washer and dry brass in the oven. I hate washing parts and waiting for brass to dry. It's worth the $100.
*If you're married, ask her, some how ya both pay.
I know you're all princes. Me, I'm an azzhole and know it.
She earned that $100 many times over. And she watches Law An Order, 48 hours, Live P.D. Sleeping with both eyes closed is real sleeping.
Loaner tools at Advance Auto, Autozone or O’Reilly’s Auto Parts. It’s Free!
Harbor freight sells the entire press kit for 25.00
Thanks for posting. I'm helping a guy who has only marginally less mechanical skills than I do, matched only by the lack of bucks in his pocket.
We now have a decent idea of what we are getting into.
It seems straight forward enough but wish us luck.
I think you guys will get it done just fine. Good luck!
Another tip for you: Always set the moving part of the "press" against the side of the part you want to move. In the first example you had the clamp "reversed". I can't explain the physics but it does make a difference as the force is directly applied to the direction of movement.
Thanks Taylor For This Top Tip , For Those Who Have Been Caught Short . Or can Not Afford Exspensive Tools .
Peace and Love
Thank you kindly for displaying your expertise and skill. This is a much needed skill/method for a diy'er like myself.
Stay dirty and efficient...
Thanks mate Got a bunch of bushings to remove, highly appreciate your video! Gonna help me tackle the job
this was helpful thanks.
I was able to get a bushing out of my rear lower arm without even removing the control arm
Cool. I have a Volvo 850 turbo that needs new bushings. Cheaper than new parts. Thanks.
I like that second idea definitely inventive I've always used a bench vice and sockets then added heat as necessary
Nice I need my bushings to my vehicle. Was dreading buying the whole control arm for 150 bux each but now I'm just spending 70 bux for both. Thanx guys.
Very slick! Definitely thinking outside the box. Thanks.
Thanks for the ideas. I'm almost at this point with my old Trans Am; I have the bushings but dealing with new wheel seals and brake plates now. I was going to bring the control arms to a shop to use a press, but I have everything needed to do it myself. Keep up the videos !! Stay safe.
NICE JOB!!! YOU'VE SHOWN ALOT OF PEOPLE A VERY EASY AND INEXPENSIVE WAY TOO GET AROUND THAT ISSUE. MY HATS OFF TOO YOU. I'VE SEEN ALOT OF INDIVIDUALS ON UA-cam WHO HAVE NO CLUE ABOUT WHAT THEY ARE SHOWING PEOPLE. A FEW CAN'T EVEN READ THE DIRECTIONS ON HOW TOO USE TOOLS THEY BUY. AND THEN THEY SAY THE TOOL IS JUNK AND THROW THE TOOL AWAY. SO TOO YOU I SAY KEEP IT UP....
Stop yelling.
Thats awesome definitely going to have to give the bolt method a try one day
Clever. I'm gonna use the bolt method for my bushings on the jeep. Thanks, keep up the vids
I'm also here researching bushing replacement on my Jeep XJ. Lol. Hope it went well for you.
That was a great and useful way of doing things much easier, great video thanks!!
thanks for sharing your talent. now I know how to replace my arm bushing of my triton.
Both are easy methods. Thank you for your video.
Thanks a lot for the tip. Awesome solution. Best of luck
When installing the bushing, it's important that you only apply force on the outer steel sleeve of the bushing; Pressing in on the inner sleeve of the bushing may result in it becoming torn from the rubber, thus destroying the bushing.
True, I wouldn't use a socket to drive the bushing through on installation. You need something flat that will cover the entire outer surface to spread the force. Using large washers on each side rather than the socket would work better and potentially cause less damage.
Use a 1 1/4" socket it only pushes on the metal lip not the center like a washer will
Cool Video dear, I learned those two methods and I will do them with my car at home, thank you, happy future.
This is really educational for me thank you very much.
Quality-content. You deserve more views and more subs.
I knock them out with an air chisel, freeze the new ones, and tap them in . Easiest way i found in 60 years lol
I used All Thread 2 Washer's and Nuts.
And Sockets
And a Impact...
Takes Them Off Fast and Easy.
And Installs Them the Same...👍
keep up the good job .great videos.
Thanks guys. I appreciate you
Great tip Pal, love the positivity
Good idea, I will give it a try
Awesome idea never thought of that thanks
Nice tips young guy :-) I will try the second method removing the bushing from my C3 corvette; whish me good luck
Thanks for the helpful tips.
mate so simple you made it, i was stressing how i fix bush of mine car, great, make a video on wheel bearing replace as well
Great tips, cheers team, will be using it on the front swing arm on my Citroen this afternoon. Taylor is hot too, always helps with a great video... :-)
Thanks for sharing. 💯
great video thanks a lot from DOWNUNDER you do not always need to buy expensive tools also
Easier? I don't know about that, the first bushing almost came out by it self hahaha excellent tip mate thanks
Excellent vid - thanks!
Thanks your video is 100% helpful trumps up
My 64 Galaxie is a handful 😆 . Broke one of my lower control arms. Where the bigger bushing goes in. I used a press but it was bent a bit. Seemed to be straight but blew the steel out when trying to press in new. So i ordered a better press tool.
Thanks for this awesome video. This will save me some cash. Sam, Zambia.
Nice one friend big ideas
Very helpful great video
Don't remember how I did my bushings on my 67 Pontiac because it was so long ago but that's a good idea I have a 72 SSL Camino I haven't done the bushings yet.
Thank you. Great tips
Nice One Piece poster!
Good information. Thank you.
Great video bro
good video.... very clear.... teaching
great video guys thx on this
Great video thaks for sharing all this stuff.
Glad you liked it.
Great video! I noticed your shirt. I grew up in Escondido and knew Ed Grangetto!
yep been there done that. sure beats a large press in the garage. but there is a time and place you just need the muscle. Thanks
Wow Genius 🤔 thinking.Good Job
Saving $$$
Well done, kid! well thought!
Very good job 👌 easily 👍👍
You are smart man thanks from Iraq
great work
Dude if I had known that second trick 🤦🏼 welp, I’m subscribing.
great vid.
Thank you
Fantastic, thanks
Thank for your info
excellent!
💯 for the burnout
You doing good job
You’re the man.
Thanks Buddy, i use with C Clamp for this methode & piece a pipe (thickness +/- 4mm, diameter 3.5 inch) other side for pusher i use socket wrench 14mm, its work.....good option for u video.
I like keeping some random pieces of pipe around for stuff like this. It comes in handy.
Budget Build Garage, yes taylor i agree for that.
awesome love it thanks
A little imagination when without the proper tools. Just my style. Good Job !
Very Good idea
good gooder producer keep producer.. non producers keep non producing.. keep producing bro
great job never seen that thanks
Nice trick! 👌
Well done.
Nice video
Cool, Thanks man!
Thanks for the tips.
No problem. Happy to help.
great tip saves buying a press thanks
Thanks your sharing sir...
thank you so much about the tip on inserting a bolt so the control arm does not flex
No problem. Just wear safety glasses in case it flies out.
Great video bro.
Thanks man.
U iz za best, thnx
Helpful
what a briliant way to put in bushes. i did note that bolt to stop it from squashing . do you have the bolt in for putting them in also ?
Wow. It works.
i like ur style
Thanks
I just like how a garage has stuff to do this job in 15 sec but charge you 500 bucks to do what can be done for 2 dollars.
Love the wanted poster in the back. #KingofthePirates
THAT GUY AT :34 JUST POCKETED SOME OF YOUR TOOLS!!!!!
good job.
Took me like four days to do upper n lower bushings. Used the rental tools. They sucked. I need to get my hands on that bolt n spacer kit.
I wish my c1500 front lca bushings responded like yours. I am looking for a torch and some dynamite at the moment...
Never on the history of bushes did a bush push so easily.
Verry idea good auto machanic