Restoring a TaoTao 110cc Chinese ATV! Is it worth it? Let's find Out! Part 2
Вставка
- Опубліковано 20 лип 2020
- Today on Praska Boys Garage I continue the restoration process on a TaoTao ATA110 Chinese Atv. In Part 2 I continue where I left off getting the ATV completely disassembled and ready for Part 3 "PowderCoating" Make sure to subscribe so you will get all the updates and can follow along with me! Thanks for watching and we will see you on the next one!
Copyright Free Music used:
Adventures by A Himitsu ua-cam.com/channels/gFw.html...
There It Is by ZAYFALL / zayfallmusic
All Night by Ikson / ikson
JPB - High [NCS Release] • JPB - High | Trap | NC... - Авто та транспорт
Would love to see reassembly in real time! Glad ur back
I'll do my best but it's hard for me to talk on camera and it would slow me down so much in the shop! I'm working on it as this is still pretty new for me!
Just found your channel while looking at reviews of cheap 4 wheelers for my granddaughter, and man am I glad I did. Enjoying the hell out of your content, keep up the great work!
I'm glad you did too! Good timing, I'm right in the middle of this one! The reviews you find might not be the best do to a lot of people run into issues, but that's why I made this channel! Help keep the kids riding!
hey there wondered where you went thats the same qaud you helped me out on thanks again for that same color and everything
Yes that's right!!! I just pull up the emails to see the pictures again. I'm glad to be back and I think you'll like this one!
Your videos are inspirational man! Keep up the good work.
I appreciate that! Will do!
Awesome video! I was waiting for this!
Glad you liked it! More to come!
Finally got one uploaded before midnight. Well played!
Thanks man! UA-cam has this cool feature where you can delay it going public. It only took 10 videos later to learn that was a thing! I got it now!
Love the videos! Keep up the great content!
Thanks! Will do!
Keep em going on the regular basis man. Good job
I'm going to try my best! I'm a father of 4 and have a full time job, but the plan is to keep them coming! Thanks for subscribing and watching!
Your really good at what you do! Thanks for the content buddy
Thanks Leonard! Appreciate that!
Thank you for showing your failed attempts at things. Make me feel a bit better when it happens to me in the garage!
You bet! We all make mistakes and believe me, I make my fair share of them! Thanks for watching!
Nice video!
Glad you enjoyed it!
Since you said college, prob red and gold for Iowa state cyclones. However, you should make it red, white and blue. Make Chinese quad great again.
You're the first to guess ISU!
Nice work again. I did an AT110D but didn't take it fully apart like a box of Legos the way you did. I'm sure this is going to come together nice. I'm looking forward to seeing how you replace swing arm and spindle bushings. I had an interesting time getting replacements to fit on a 3050B last week. (Well worth it to tighten up front end slop though.)
Thank you! Honestly I haven't started the reassembly yet so it will be a game time decision on what I do with all the suspension. I'm starting on the engine this weekend I'm hoping to stay out of the bottom end but who knows, fingers crossed!
Like the new intro
Thanks! Fiverr for the win!
Appreciate your approach to working safely, really enjoy the videos and have a solid “go to” for when I do have questions about stuff. If you don’t have them already, some real time tear down and repair of individual sections would be cool to have as tutorials-brakes, rear end, tires, something not too extensive about wiring and common adjustments. Appreciate your work. #subscribed:)
Thanks man, and I really appreciate the feedback! Part 4 will be the motor getting rebuilt so that will be really detailed. I do plan to have more "How To" videos in the future. Any suggestions on what I should do first?
Praska Boy's Garage I’m a new rider at 45 but would suggest the first few things ( maintenance wise I haven’t reached this yet with mine ) that tend to fail on Chinese quads and I’d also suggest making the recommendations for any costs to be as budget friendly ( we are buying cheap so I assume that’s a given but can’t really direct you without researching it myself unfortunately ) as possible but still include DIY for those of us watching who intend to try our hand at the repair-keeping it simple will or should draw more people in. I would think covering the basics of why an engine wouldn’t run would be fuel, fire, oxygen, and compression. So if that makes sense to you, center the videos around those four individually of course and what could possibly be the issue for each from a troubleshooting perspective. If this, check that, if that, check this - you know, process of elimination. And from my previous comment, save the tutorials I requested for another time. I think everyone reaches those points but feel like it’s probably later on meaning if maintenance is done to keep it running then those things will eventually fail and be in need of repair. I have swapped out the rear end on mine, changed the suspension, changed the exhaust, had to fix the wiring, put in a new clutch, carburetor, ignition, added new lights and it had a performance coil and CDI box already on it so I wanted to learn how to do these repairs ( granted I had some help with them ) which led me to watching videos on YT but there’s a few more ideas for videos if they aren’t already something you have lined up. Damn I talk too much lol..
Finally!!!!! Love you dude!!!! No homo
Benjamin Joseph to be exact! Thanks man! Working on Part 3 right now!
Hey BJ u got a instagram
Yes
Videos getting better and better 👌👌
How long till part 3
Thanks David! Part 3 will be posted on either the 28th/29th!
Love the videos! I recently dug into trying to get our daughters 2007 ATA110/B1 (thinking it’s a B1) running again. Bad gas was the main issue, but it needed a few other parts as well. I’ve been acquiring parts from VMC online and have it running well without the throttle cable installed. As soon as I put the factory 30” throttle cable on it raises the sleeve in the carburetor and I’m unable to adjust it to a low enough RPM for idling. Could you possibly offer some insight on this? Thanks!
Thanks! That issue happens all the time. Check out the last video of this project: ua-cam.com/video/4_e44WZ6VC8/v-deo.html and start @ 3:10 That should help you out!
I was disappointed when the end of the video came. Great videos man.
Hopefully disappointed part 3 wasn't out yet! Not that you didn't like the content! Thanks for watching Tom!
@@PraskaBoysGarage no way, love the content. I feel kind of at home watching you work!
@@tomclark3592 Thanks brother! Part 3 coming Wednesday!
Another knowledge packed vid. Thanks, I've been learning a lot....I know you mainly concentrate on the Chinese ATVs, but do you ever rebuild these motorbikes from tractor supply like a coleman, or a massimo? Great vid.
I do all the time, but usually just in my free time when I am not filming for UA-cam. I started the channel to focus on youth powersports since there wasn't a lot of good information out there, but soon I will start to branch out!
Red and white 😍😍
Red and white is my favorite..but not this time :(
Praska Boy's Garage whatever it will be im sure itll look awsome love your videos man good work 👍
Hey could you tell me how to hook up a Chinese atv solenoid. Does the starter and positive go on the same circuit and the negative go on it’s own circuit
Great video! I'm guessing red body and white frame or green body and yellow frame.
Close!
black& yellow
BJ, in a prior video you did a rebuild and gave away the quad. In that video, you stripped and repainted the plastics. I just picked up 2 Coolster 150ccs and plan on doing the same thing to the plastics. Are you able to tell me the stripper and paint products you used for that rebuild? I would appreciate it.
For decals I used goo gone adhesive remover and I used Klean-Strip Aerosol TO strip the paint and you can purchase from a local home store like Home Depot. Here is a link: www.homedepot.com/p/Klean-Strip-16-oz-Premium-Stripper-Aerosol-CA-Formula-EKPS302SC/311799645
@@PraskaBoysGarage Thank you very much for the quick response. I have to say, I really enjoy your videos. They are entertaining and informative. They were instrumental in helping me fix my nephew's 125D...rewire, new carb, new air filter, new starter. It had been sitting for 2 years and after watching your videos, I got the courage to mess with it. Worked like a dream. He was extremely excited when it was fixed. Thank you!
Black and yellow in a Wiz Khalifa voice 🤣
Haha, not for this one, but I did a "BumbleBee" build for my son last summer! It's a cool color combo for sure!
Hey I was wondering what’s the typical chain size for the 50-110cc atv ? I can’t find a straight answer???
I've used #428 on the majority of my builds. This one included! That's pretty much standard for these Chinese atvs.
Praska Boy's Garage Awesome thanks bud !! What’s the normal link length??Great job on the informal content !!!
@@tyronewaughtal1179 It's usually a bit longer than 3ft. I just order the chain at 10ft at a time. Thanks for the support, I appreciate you watching!
That rear rack is china quality
Do this utilize the Baja ATV parts ?
Some parts will be similar like the motor, wiring and controls. The body and plastics will be different.
Praska Boy's Garage Thank You, I go to a local salvage yard that has tons of new part for those particular bikes. If you ever need anything please let me know.
Great job but with your skills why not do this 2 something with high resell value when your done. I get its more of a hobby respect for that.
I do the same on name brand, I just haven't filmed it for UA-cam. We own several name brand power sports but I felt that UA-cam has a lack of good information available on these Chinese ATVs. Since they are mostly DIY repairs I wanted to start the channel here. I will soon start changing it up and show rebuilds on the name brand.
Got to love mass produce junk, but there usally close
The E22 motor is a clone for sure! Good thing the parts a cheap cause this one needs everything!
@@PraskaBoysGarage its funny how different they are. I just finished making a 125 out of 2 atvs, exact same year and model but there are differences. Out here they rust out. A 2010 will be half gone just from the salt air
Salty Monkey I did a lot of research years ago on them and China has a ton of manufacturers for these atvs but they all use the same parts to make them. Where are you that you get rust that bad?
Out on the eastern coast of Canada
Hey sup guys, I got an atv 110cc to restore, made it run and move but before spending any money on it I want to make sure I can get a registration on it, the problem is that the guys who have it to me doesn't have any title or registration because when he bought it he didn't title it, if you guys now something about what to do please reply back
Oh by the way I live in California if that helps
Hey Patrick! I also got your email and sent you a response! Thanks for watching!
I have a Tao Tao 250 rhino and can’t find parts anywheres
eBay and Amazon are great starting points. What are you looking for specifically?
Praska Boy's Garage seat mainly
Praska Boy's Garage also I need help it won’t start after fuse blown and we replaced it
You're handsome, me love you long time
Love you to brother! Thanks for watching man!
Ga bulldogs
Sorry but that's a negative!