61MPH Drag Mini Bike Run!!!
Вставка
- Опубліковано 17 лют 2019
- Today we get to take the custom made drag mini bike with a Tillotson out for a pass! Let us know what you think of this Stage 4 engine and don't forget to like, subscribe and share.
Check us out on ROKU - bit.ly/30lHmaA
Events & Merch - bit.ly/33YbmtO
----------------------------------------------------------------------------------------------------------------------
Parts used in this build -
Parts Used
Ported & Milled Head - goo.gl/3Rzrta
196cc, Tillotson & Clone Stage 4 Kit - bit.ly/36Py5cJ
Predator Hemi 212 Stage 4 Kit - bit.ly/2S4Nfp0
Predator Non-Hemi 212 Stage 4 Kit - bit.ly/37OwBAs
3 Disk Race Clutch -bit.ly/2HXseYN
12 Tooth Sprocket - goo.gl/zFNuWD
212 Non Hemi Top Plate - bit.ly/2wayABr
Mini Bike Frame Parts -
Engine Plate - goo.gl/b9jgKj
Flip Engine Mount - goo.gl/ek2pWv
Pegs - amzn.to/2WAeqcL
Front Wheel - goo.gl/c9EpGV
Front Wheel Hub - goo.gl/3suuzE
Front Tire - goo.gl/owzBb6
Front Tube - goo.gl/UQnC3S
Rear Tire - goo.gl/jUUvuT
Rear Rim - goo.gl/1Ebgoa
Rear Wheel Hub - goo.gl/RKm9nn
Brake Disk - goo.gl/eqBa1V
Brake Disk Hub - goo.gl/4oHh3x
Sprocket - goo.gl/iv6Hmi
Sprocket Hub - goo.gl/t9kn1D
#35 Chain - goo.gl/my7MUN
5/8” Front Wheel Shaft - goo.gl/mg9QHg
1” Axle - goo.gl/4vqxkF
Axle Bearings - goo.gl/GPKbGY
1” Collars - goo.gl/VvMiyS
Lower Fork Collars - amzn.to/2CZEiph
Muffler - amzn.to/2CYb4Y6
----------------------------------------------------------------------------------------------------------------
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - goo.gl/V9dHPp
Everlast Welder - goo.gl/8DRgZe
𝑴𝒆𝒆𝒕 𝑼𝒑 - 𝑴𝒂𝒚 31 & 𝑱𝒖𝒏𝒆 1, 2019
Windrock Park Group Camp Area- FREE
555 Windrock Park Lane, Oliver Springs, TN 37840
All types of off-road vehicles are welcome. $$
Trails Mild to wild. Camping available - 865-435-1251
Lots of giveaways!!
For more information email MrsRBGkarts@gmail.com
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Google+ - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
-------------------------------------------------------------------------------------------------------------
Check Out Go Power Sports for all your Go kart needs!
goo.gl/OoWVDK
-------------------------------------------------------------------------------------------------------------
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #Fabrication #MiniBikes #GoKarts - Розваги
What I think... Come on man you guys are killin it. Every video is getting better and better. It's not always about one up'ing the last video it's about content, fab, and your creative process. From the first time I found your channel to now so much growth it's awesome. The shop, the builds, the production everything has consistently gotten better.
Oh my lord! That is awesome! That thing gets boy. Glad you decided to keep that one the small block frame. The big block one is gonna be sick, can’t wait to see it. Y’all boys are legends in my book, let her rip and take it easy. See ya on the next one
Wooohhoo! I love that Hell Kitten! Great build Red and friends. Keep it up.
Wow that's really cool. I can't wait to see the big block version. Props to the camera lady as well.
Outstanding build. You guys knocked it out of the park
That's awesome man.. Just getting into mini bikes again. Ya guys are doing great. Keep it up.
God bless
I hope this is one of those builds that never stops! Love it
AWESOME build!!Keep up the great work Mr Redbeard👍
Dude this thing had crazy acceleration. Awesome
Nice bike thanks again for the cool videos
Sweet bike!
Great video!! Very excited for more buggy vids!!
Also a fork brace will help with speed wobble. It goes from fork to fork keeps the fork legs working together.
That thing is bad ass keep building these bikes
Super cool bike. Love the torque that engine puts out. Dyno test could be fun
Nice sweet sound 🛠
that is a very sweet drag bike looks like a lot of fun to ride good show guys
That thing sounds wicked!!
Damn these are the types of videos i like to see from you... i wanna see you build one with the fastest motor you can build
Awesome bike! I have a built 212 hemi on a Baja warrior that just ran an 8.37 in the 1/8 at 56 mph. You don't have to have a super high top speed to get crazy times, it's all about the launch
Love it ! Want it ! Need it !
Love the bike guys
hope you guys set up a friendly race with some of the other go power sports gang (ie cars and cameras). not for whose best, just a good time. really enjoy the cross over videos. you all have different talents. helps me decide what way i want my projects to go when i see your guys stuff side by side. thanks again for the great content. really enjoying the drag bikes. cant wait to see the big block ultralight.
I repowered a Coleman 200EX with a stock 420 (stage 1 no governor) and a 40 series TAV. It clocked 59 mph on my GPS. I can't wait for the big block drag bike build. It should be awesome!
loved it the torque convertor will make it a big difference great job
Awesome, that sucker is FAST
BE SAFE AND BE THE BEST
That's sick!
i think honestly this is the best engine you’ve built lol you’ve really stepped it up
If I can make a suggestion for the color of the drag bike, I think
Coca-Cola red would be an awesome color. Or fuchsia. Fuchsia is kind of a pink color and you know what they say about a man wearing pink. You better be a badass : D and that drag bike is definitely a badass!!!
Big block drag mini bike build? Harry and lloyd could make it to aspen pretty quick with that.
Brandon Floyd 💀😂😂😂😂
He ‘s scared to hold it open
Just put that same head and a22mm mikuni on my stage three 212,can't wait to try it out,sounds like im gonna see a big improvement
Awesome mini "Beast" does seam like if u get the gearing straightened out she will get mid evil on some Azzez whoooooo!🤘
The intro keeps getting better and better
Good Googa Mooga Love it..........
Love the new intro
Loved it
This might have been 2 years ago but dam when that bike hits the power ban it’s gone…. Wish I had you working on my mini bike….
I give ya’all ten stars for that build. !!!??? Nice.
That's awesome! It would be interesting to put a muffler on it and see how much it hurts top speed, if any.
Bring them to North Carolina in April! Huge mini bike drag race!!
Pretty sweet man.
love it it's so awesome
Bad ass bike
you guys should play with needle height and get a wide band. I struggled to tune my ruckus just right and the wide band made it simple. It sounds like fueling is off on the bottom end. Really nice build, keep them coming!
Cool mini. Its too cold in my garage to finish mine. Ill post it on my channel tho. Keep up the good content gentlemen!
Need to put one of those cheap tachs on there for sure. Then adjust the gearing and cutch once you get an idea of where the main powerband hits. Sick bike.
I have the same jacket that Lonnie has haha. Bet we got it at the same Walmart too. Love the mini bike.
17:33 sounds like the intro to Kickstart my heart! Haha
That`s very fun to watch but also a very slow drag build compared to a 2 stroke.... Got a Miarelli horizontal liquid cooled engine with 95cc Stage6 RT Bigbore making 32 Hp to the wheel (13inch) with a 36mm Airstriker carb. Powerband set to 12500 rpm going around 90mph on the 1/8 mile.
Make a video n show us this that u speek of
Also seen some very powerful Piaggio 2t when built properly
Video or it didn't happen
Ask Brandon Saylor from the Scooter Swap Shop about te DSSC in Germany and HK Scooterperformance (Hendrik Keller). HK previously set the new record for 70cc cylinders with 40+ hp. My engine was setup at their shop in 2017. Just look at Videos from the DSSC( Scooter-Attack) in Germany. Would like to show a Dyno sheet but cant put it in the comments somehow..
facebook.com/hk.scooter.performance/videos/492105961200196/ This is Dennis Kreft with 70cc engine from the HK Scooterperformance Team doing 6.464sec on the 150 meters(50meters less than an 1/8 mile which is 201 meters). And 127.69km/h = which is around 80mph with only 70cc
Great job!!!!!!!
Rad!!!!
Gone in the wind or someone might say lontreezyyy gone in breezyyy. Lol
Wicked! 👍
Sweet!!!
Heck Yes!!!!!!!!
I bet the nabors shit down both legs when that thing started, great build.
You should run 2 engines on the drag bike, you could run a centrifugal clutch on the first engine the a hand clutch on the second one. the centrifugal clutch on first engine would compensate for the engines not running at the exact same speeds.
Awesome
How cool is that.
WOO HOO!
Have you been waiting too
That’s a sick mini bike I want to ride one.
That's beasty I want one
I need me some of them green foot pegs 🤘🏻🐿🤘🏻
very nice
this is a cool build red beard fast
Bad Ass. Get it Chrome plated. Never seen anyone With a mini all chromed out yet !
Sweet..!!!
Badass 👍👍👍👍👍🤘
Effing sick
That thing is sweet! I’ve seen a nitrous kit on eBay for a 212... maybe check it out?
they've tested them before, but not on a built engine. would be interesting to see if it makes much difference.
Agreed ^^
That little joker hauls ass 🤘
Thing tools! I have a alky flat head Briggs I've gotten up to 57mph. Gets a little scary at those speeds hahah
I just got 58 on a bt200x with ghost motor with stock intake and carb. 10t on the front 45 on the rear. and swinging those huge 19" mud tires. you should be gettting a few more smiles per hour
Crazy top speed! Gearing will need adjustment for dragging.
Assuming that the weather isn't miserable here tomorrow... I should be getting my first mini bike
(Used Baja warrior) there will be videos on my channel... From the pictures I saw it needs a paint job I'm going to replace the motor (not really looking to put any time or money in a used non running Chinese clone engine) overall the bike doesn't look bad but I'll check more thoroughly when I actually see it (I'll most likely buy it as long as the front suspension works and the frame isn't damaged or severely rusted... I backed out of the mini bike deal I decided since I'm only 200 short I'll save for a bit longer and just buy a new Coleman CT 200 u ex ...
I like how loud it is.
If i had one for around the area here then id be fine with topping out at fifty but id want it to accelerate way quick than the one in the video.
So id give up some top speed to have way better take off
I've been trying to build a gx240. It used to be a gear reduction motor so I swapped shaft and the side cover. But I'm finding that the billit flywheel I'm never gonna be able to afford. Have you ever attempted to pour a cast aluminum yourself. I really want this motor built but the flywheel price is killing it. I can't even find a used one. Love your channel.
The vid isn’t in order but still love your channel keep up the amazing builds
hey guys i love the videos and i want to see where u got the shocks because we made a mini bike with a cr 85 on it and we need shocks on it but we dont know where or what ones to buy
Whoa that sounds so fucking cool Ong dude hiwed it echo so far like a fatty pipe or something crazy
Bahahaha, what an awesome bike boys!
That is BA. I would like to see you guys fabricate a mini Fish Tail exhaust tip and throw it on something just to see how outrageous it sounds.
Wouldn't a rounder rear tire make it less sketchy? With the squared one it bounches on the hard edges of the tire. I know drag bikes use square tires at the back for traction but they are usually deflated and the torque will round the tire at higher speeds anyway.
Setting up damper so its as far out from steering bolt as you can get away with will make it more effective as it will have more leverage
I would put rear foot pegs on it as well. Will feel more comfortable with tucking and also be more aerodynamic. Front ones should stay for cruising.
YEE YEE!!
I'd be going WITH the traffic at all times!
Same unles it's a pedal bike
Especially testing a new bike. Imagine getting the wobbles with the car going 60 miles an hour coming straight at you. It’s just crazy.
I want to build one to put on a sps swamp runner. Any tips or advice? Also I need to keep the bolt hole pattern on the rear cover to mount the sps kit to it. Thanks guys.
it’s cold?! lol you gotta come up here to michigan!!
Hey red beard what you mean about the faulty ignition pull? Whatever y’all done I seen y’all went from 47 to 60. Thanks
Redbeard you guys should build a stage 4 670cc dragbike lol that would be cool
God bless spread his word!
Was watching a live stream when this popped up. I swore it said bikini bike. 🤣🤣🤣🤣🤣
Hey Red Beard awesome video. My son and I built a stage 4 hemi 212cc with 1.2 rollers 44c comet converter on a bt200x. We are having issues and cannot get past 3500 rpm according to my gps speed, tire size and gearing, 5.00 ratio,19" tire, 6700 rpm cam. I tried a new coil I had from the original bt200x engine and the same thing.
Ours gets to 3500rpm fast with power, then feels like it gets stuck at that rpm and will not build any more power.
Is that the same issue you had?
I'm not running a fuel pump.
Should I be using one?
Would love your input, thanks.
Update: We had a gearing issue that is now resolved. The gearing combined with other variables would not let the engine get into the powerband. With trial and error we figured it out and created a monster. Will be adding videos on Jordan Hernandez you tube channel.
Haha the sound when lowering the bike sounds like iron man
Im dead he said hell kitten😂😂😂
That mini bike is fast
You should put a 4 stroke dirt bike motor on a mini bike
Right he should have put like a 125cc with 4 speed
@@michaelangelod5008 I personallly think that a CRF 450 would suit this thing way better than just a 125. Though it might be a hair to fast.
@@michaelangelod5008 no 125 4 stroke Have no power, probably a 150 or 230
I put a warrior 350 engine in one.... Haven't fully tested it yet though, but it should be quick
2 stroke bud
Maybe adjust the clutch to wear it engages at a higher engine RPM!?
I love the drag bike have you guys seen the golf cart that does a hundred and 80 miles an hour with the race golf cart and have you seen the drag bike that goes 102 miles an hour they're both on UA-cam check them out love you videos keep them good keep them coming
Two speed with a bottle would have been sick