Drag Mini Bike Build Ep1
Вставка
- Опубліковано 31 січ 2019
- Today we start the drag mini bike build. We are going to do a few frames so stay tuned! don't forget to like, comment and subscribe for more.
Engine Parts -
Ported & Milled Head - goo.gl/3Rzrta
196cc, Tillotson & Clone Stage 4 Kit - goo.gl/rpwj1d
Predator Hemi 212 Stage 4 Kit - goo.gl/Z95uc6
Predator Non-Hemi 212 Stage 4 Kit - goo.gl/xhnvHq
3 Disk Race Clutch - goo.gl/1U6DUq
12 Tooth Sprocket - goo.gl/zFNuWD
Top Plate - goo.gl/EHHzof
Catch Can - amzn.to/2CZFU2j
Bike Parts -
Engine Plate - goo.gl/b9jgKj
Flip Engine Mount - goo.gl/ek2pWv
Pegs - amzn.to/2WAeqcL
Front Wheel - goo.gl/c9EpGV
Front Wheel Hub - goo.gl/3suuzE
Front Tire - goo.gl/owzBb6
Front Tube - goo.gl/UQnC3S
Rear Tire - goo.gl/jUUvuT
Rear Rim - goo.gl/1Ebgoa
Rear Wheel Hub - goo.gl/RKm9nn
Brake Disk - goo.gl/eqBa1V
Brake Disk Hub - goo.gl/4oHh3x
Sprocket - goo.gl/iv6Hmi
Sprocket Hub - goo.gl/t9kn1D
#35 Chain - goo.gl/my7MUN
5/8” Front Wheel Shaft - goo.gl/mg9QHg
1” Axle - goo.gl/4vqxkF
Axle Bearings - goo.gl/GPKbGY
1” Collars - goo.gl/VvMiyS
Lower Fork Collars - amzn.to/2CZEiph
Muffler - amzn.to/2CYb4Y6
-----------------------------------------------------------------------------------------------------------
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - goo.gl/V9dHPp
Everlast Welder - goo.gl/8DRgZe
RBG Sticker packs $15 (Includes 4 stickers)
Paypal.me/redbeardsgarage include your name, address & what you're sending money for.
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Snap Chat - redbeardsgarage
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Google+ - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
-------------------------------------------------------------------------------------------------------------
Check Out Go Power Sports for all your Go kart needs!
goo.gl/OoWVDK
-------------------------------------------------------------------------------------------------------------
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RedBeardsGarage #RBGKarts - Розваги
I will have to say there's nothing better than Watching Two Brothers work together nothing better than brotherly love
I like the longer videos personally.
When ur wife giggles mine does too. Lol. We're ready to see the drag bike drag. Good luck.!
Ahh...left-handed..and creative genius. God Bless Brothers in Christ.
It's about dang time for a dragbike build
Somebody got the right idea for a build
I was not happy when this video ended lol. Love RBG!!!
That is beyond sketchy... I LOVE IT!!!
I like the long vids with lots of things done.
15-20 minutes is perfect
Awesome build
Brilliant as always !!!
Im actually a HUGE fan of the 25 minute videos, the details are much more in depth like i genuinely feel like i could tackle the same project and use the video as a tutorial where as the 15 minute videos some of the monor details that can make a big difference tend to get left out. But then again you tend to upload alot more often then most doing the q5 minute bits so idk man either way keep the great content guys
I l like that comment you weld the Grand Canyon sick build btw
you guys r soooooo coooool love your videos i wish i was half as smart as you are i would be happy but i can only do so much cuz im stuck in a power wheel chair
I’m ok with 20 min videos, get to see more. I’ll still watch if it you shortened. Love the build it looks like a good one in the works.
I like the longer videos
Cool build.
Never get bored watching your guys videos love watching wish they were longer
1:37 Woah there buddy 😏
This is gonna be badass
💪😎👍
Looking sweet man
The longer the video the better
Have so many projects it seems like lol, excited for this one mostly cause I'm into drag racin
This thing will be super cool. Btw, I'm all about the 20-25min videos, personally. I know- You can't please everyone. :)
you should build a 670 or equal drag mini bike, and call out Cars and cameras and the Green machine. would be good incentive for them to get it going again and a good show of your guys frame and engine skills.
I just love the opening when lonnie bust's his ass on the dirt..LOL
Ohhh here we go....... this is going to be great
Epic build
“I had it on cold fusion mode”😂😂😂
like the longer vids
After seeing you guys in action on other minibikes, im not so sure you need a drag bike? LOL!But ill be happy to watch at your expense lol.
God Bless, I like that! good to hear people say it these days. cool build, looking forward to seeing it done
I love the videos
She’s gonna glideee
I think u two should dual it out
I'm staying tuned on this one building my Nitro 50 drag mini now so I'm interested in seeing what all you guys do keep up the good work great videos
Love it so far 😍
Oh yeah, this is gonna be a fun one... nice work guys, looking forward to seeing it run.
More cold fusion!
When you get this done, you should have a minibike drag race. I have a dedicated drag only bike I’d like to run, but organized drag races are kinda uncommon.
Come on greg weres the safety glasses.your teaching kids my grandson brought this to my attention.
I use a 1" split lock collar to mark my cut line all the way around the tube
You are my favorite youtuer
New subscriber.......you guys should use a Kohler V-twin in that drag bike ....Midwest fabrication builds them for the mini tractor pulls , they pump out 160 h.p. @ 12k rpms............ARC Racing builds a pretty nasty Predator V-twin too......you should do an episode wearing Florsheim Zipper boots.....
Show man
I have already seen this cause I follow Greg on Instagram...you should too!
#SMALLENGINENATION
Spending a little time making a frame jig is worth it beings your making more then one and a dampener would be advised at the speeds you want to achieve!
First comment. Looking forward to this build
Iv been waiting for this
hey redbeard, on your ultra lite drag mini bike you should use some sort of mixed metal to get the best strength to weight ratio. just a thought though idk if you can even weld the stuff lol
You going to be the one riding the super light frame bike? Might want to think twice about the thin wall tubing.
I’m hoping someone will build a Bonneville Salt flats fastest mini bike 😁
Hey RB are u guys gonna build it for the 1/8 mile or 1/4 and what is your mph goals. Another thing is are u gonna run a torque converter? If so are u gonna install different stall springs and weights in the driven pulley?
Fourth yesss
*cough* c&c vs rbg *cough*
customvideo454 no I just want to see them race. Not trying to start a rivalry at all.
How is that starting a rivialary thats what you do when you build something fast you race, it would be cool just to see who could build the faster motor and lightest frame
dustin Davidson EXACTLY. If it’s a drag bike then it should be in a DRAG RACE
unemployable ikr
@customvideo454 In general, I do agree with the root of your point. The comment section of all the youtube cart/bike builders is rife with "fans" talking trash on C&C, RBG, and a bunch of others... for literally no reason. Common complaint I read is "so and so copied such and such's build they just did." K. Who the F cares if two channels built the exact same bike/kart? GUARANTEE you they did it differently, probably used different parts, and a different approach.... and I enjoy watching ALL OF THEM.
That said... it would be fun to see C&C and RBG do a build off. I mean - They kinda did at the Texas swap meet, and that was quite fun to watch!
Next Monday..... welding the grand canyon shut
I literally started build my own today I'm use a pocket rocket frame with a predator 212 with a torque converter and a 6in wide racing kart wheel
hope you get a stearing dampener for it. going over 80 is sketchy
This^^
I have 2 on mine... very important
Both my street bike's have them. Had a buddy loose his life because of a death shake. He had no sabalizer on his busa.
@@bryanroupe8646 sorry to hear about that bub
I wouldn't even contemplate it for a build like this. Completely unnecessary.
For 'bling' purposes, sure.
That rear wheel held onto the axle tube only by the keyway?
Good idea? I guess we'll see.
Tan version of the Ernest P Worrell shoes lol
How do you like the portable bandsaw from Harbor freight ?
didn't know you were a lefty until today. me too.
We make a good team broskie
Fricken awesome bud 🤘🏻👍🤘🏻
Hey quick question where did you get the frane
"OWWW, hot in my ear!" lol
what steel do you use
Im building one with a Wisconsin engine and a jr dragster slick
what type of welder are you using?
Where can I order the triple tree plates?
Are you gonna put a 40 series on it
That rim and tire combo in your parts list are completely different sizes .... I’d edit it for the right sizes
Brandon may need a new hood if he cant see much while mig welding.
Why not use Chrome Moly tubing?
Plis
How do I make or where do I find rear axle spacers
Use some 1 pipe to slide over the axle
Where did you find that tube notcher?
He made it
Are you putting nitrous on it ????
Mini drag week?
those are freestyle pegs.
I have an all organic 6" jack shaft tube. Anyone wanna see?
I mean 5:02
RBG is there no Merch store?
Wats up Red
First view
carbon fiber frame rails
If u sell it let me know what u want im in indiana
Indiana born and raised
Nice im in nwi close to lake michigan
Same bout 45 from south bend
I'm in Michigan
Helio poner treduction lspañis
How do you become a patreon supporter?
check out Detroit hood TV ,great mini-bike racing
Me crying inside that they cut up a shiny new axle
I would rather have long videos
FIRST
How can there be so many first when the definition clearly says, "coming before all others in time or order". Does that not mean only ONE can be first??? Yet, there are so many claiming it.
@@nzzs203 as a master of the oof I declare this comment a high quality sleeper oof as it is a important comment in an environment of laughter and jokes - oof
Shout out plz notification bell is on
Me too!!!
@@marksshop3029 mine is for you and red beard
Cutting and Grinding with No safety Glasses on! BIG No No Otherwise cool project
Guys put some fucking safety glasses on Jesus!
Edit At least he's got them on top of his head
Get a new chop saw blade
You [ just like Cars and Cameras ] have mentioned that we 'get bored' with longer clips. Ask Joe Rogan's audience...
or Bad Obsession Motorsports.
That is old thinking, or some crap that YT is feeding you through 'analytics'.
Sooo,It's going to be black with pink lace accents in the paint,so it's in 'drag'?Those frilly dangle things in the handlegrips?I kid of course.This will be Butch...or something else rugged,and fast as heck,once you drop a smaller sprocket on the tire.30 Tooth/?,with the output a 12t should get you 60mph,at least,with that small diameter tire.
R B don't go and Shorten the videos. They're perfect length!. I really don't think all of us subscribers get bored through a 30 min video. That's a really shity idea. What will happen is now we just get left hanging until next time. Well now IDK if I will all ways come back to RED BEARDS GARAGE. CMON DON'T do it. At least just entertain not doing it. PLEASE. THANKS your friend WRENCH