EZSET Electronic Deadbolt Programming Instructions
Вставка
- Опубліковано 9 лип 2024
- In this video, I've demonstrated how to program the EZSET Keypad Deadbolt. Whether you have a brand new or pre-owned EZSET Electronic Deadbolt, you can follow my instructions in this video to program the lock.
The programming steps in this video include, resetting the lock, changing the default Programming Code, adding/deleting User Codes, and enabling/disabling auto-lock.
So, even though you don't have the programming manual for your EZSET Keypad Lock, the instructions in this video got you covered.
Timecodes
0:00 Intro
0:06 Restoring Factory Default Settings (Reset)
1:10 Door Handing Identification Process
1:52 Changing the Default Programming Code
2:41 Deleting the Default User Code
3:36 Adding User Codes
4:28 Deleting a Single User Code
5:19 Deleting All User Codes at Once
5:38 Enabling/Disabling Auto-Lock
6:57 Mute/Unmute the Lock
7:52 Conclusion
Buddy here did the most excellent job showing and steps to this new lock I just put in hats off to you every other site I looked at was a complete failure thank you again
You're welcome!
I don't know how you only got a few likes when you've been so thorough with the entire setup. I hope your channel grows and that God blesses you and your loved ones!
Bless you too! Thank you for the support!
Well done! The instructions are super clear and no nonsense. Best setup video!
Glad it helped!
This was very helpful thank you
You're welcome.
Awsome video, thanks for your help 👍🏻
@@Livinginthebush69 You're welcome!
Thanks you
You're welcome!
Mine won’t even beep… fresh batteries n all
Is it possible to get a physical key made for this lock?
As far as I know, you can't get a physical key made for this lock. The lock comes with a physical key and the only way you can get another key is to rekey the deadbolt.
@@SmartTechVille that’s what I thought. Thanks for all the help. God bless.
@@shahzada3197 Glad to be of help!
I reset it but the pc 0000 wont open door? Am i missing something
Hi there,
Default PC -- 0000 can only be used to program the lock. You can open the door with the default UC -- 1234.
Make sure to change the default PC and delete the default UC to ensure security.
Doesn't works for me
@@maillette2012 Hi there,
I'm sorry to hear that. Could you please provide more details on what specifically didn't work for you? That way, I can assist you better. Thank you!
Edit: This is the full programming video, you should watch from the beginning. If the reset is successful, it will restore the factory default settings, so you now have 0000 as the default Programming Code and 1234 as the default User Code.
The next programming step is to change the default Programming Code, then delete the default User Code and add new User Codes. You can find all of these in the video -- follow carefully.
So when I do the door handing process I keep getting 3 red beeps. I can't get past this step.
Hi there,
This usually happens if the lock is not installed correctly. If you have just installed the lock, remove the interior assembly and reinstall it - make sure the latch bolt is retracted while installing it, and the thumb turn in the vertical position.
Also, reset the lock before performing the door handing detection.
@SmartTechVille I was thinking that was the case. My husband God Bless him isn't very handy. So I won't tell him that, don't want to hurt his feelings. 😆 thank you for answering.
What if you forget the programming code? We just moved in and I only got one user code from the seller
@@shahzada3197 Hi again,
I've responded to your comment in the other video. You'll need to reset the lock -- then use the default Programming Code, which is 0000 to reprogram the lock.
I've demonstrated how to that in this video. Try watching from the beginning to the end.
@@SmartTechVillethank you so much sir.