Це відео не доступне.
Перепрошуємо.
Plug & Play HDMI For PS1 & PS2! Should You Buy the LevelHike HD Video Cable for PlayStation 1 & 2
Вставка
- Опубліковано 13 сер 2020
- In this video, we unbox ad test out the LevelHike HD Cable designed for the Sony Playstation and Playstation 2.
You can't doubt the powerhouse that was the Sony Playstation 2, or its direct predecessor, the PS1. Both systems featured iconic games and experiences. One of the downfalls of these systems, at leat on current flat panel televisions, is the lack of any HDMI outputs on these systems. Sure, some Playstation 3s offered backwards compatibility, and PS Now lets you go back and replay some of the PS1 and PS2 libraries, but nothing beats playing on actual hardware. That's where the folks from LevelHike come into play with their HD Cable for the PS1 and PS2. This plug & play cable promises to give you a better image right through your tv.
Like other LevelHike cables, the Playstation edition has a dongle design versus being a hardwired cable. This means you can use whatever length HDMI cable you might need to connect your system to your television. I prefer this setup to the all-in-one cable setup design. There's also an included Micro USB cable for power, and a 4-foot long HDMI cable. Everything you need to connect it up is included for you.
Connecting the cable to my PS One was a bit of a challenge; man, that was a tight fit! Connecting to my PS2 Fat was not an issue at all, as it plugged right in without a struggle. I had thought initially that the connector on the LevelHike cable was too fight, but testing some other cables too, it's on the PS One itself.
I started my testing on the Playstation and Jet Moto 2. Ryan Schlemmer has wanted me to stream this for awhile and I thought this was the perfect opportunity to test this out. Well, uh it's a, um, ok racing game I guess. I didn't do that well to start but the controls felt connected and the colors looked decent.
From here I threw in WCW Nitro, which I didn't show in the game play footage because the game is so terrible. But, the visuals looked pretty sharp! The colors looked right, there wasn't any real lag or delay, and audio sounded good. But this is just such a terrible game, do NOT under any circumstances subject your PS1 to the torture rack that is WCW Nitro.
The final PS1 game I took on was Crash Bandicoot. This classic game is so good, it really is one of my favorites on the platform. This was the first game where I noticed, similar to LevelHike's other cables, the reds seemed to be oversaturated and rather hot. It didn't seem to be to the same level as the other cables, but it was definitely noticeable.
Next up was the PS2, and I am sorry to have to report that you cannot play DVDs through this cable. Much like other cables, you get a green filter over the display when playing DVDs, bummer. But what it did play without an issue was EA's FPS Black, an amazing title for the platform. I thought the visuals on this were really very good, a little bit of that 480i shimmer was present during game play however. But audio and video were both along the lines of what I expected, and Black is amazing. If you don't have it, get it, seriously.
Finally I threw in Ratchet & Clank: Size Matters, and once again things looked and sounded quite good. The reds didn't seem as oversaturated here as in the PS1, so perhaps the cable is optimized for the PS2 color pallet, I'm not sure. I was able to run through a lot of the first level in my test without any complaints.
Why it RoX:
Why it Rox:
- Plug & Play
- Budget Friendly
- Dongle design lets you use whatever length HDMI cable needed
- 4:3 & 16:9 switch
What Could Be Improved:
- 480i vs 480p leads to shimmering effects
- You really need to push hard to get the dongle plugged in on PS One
- Reds are over-saturated
Should You Buy One?
Both the PS1 and PS2 support component video right from the box, but going HDMI does streamline things into your TV. The 480i shimmer IS there, which could be distracting to some, but when you get to the PS2, the visuals are really pretty decent. Will this outdo an HDMI mod? Of course not. But for under $40, you get a quick and easy way to enjoy your Playstation on a modern TV. For me, I'll still likely use my Component Cables into a RetroTink for the PS2, but for PS1, this is good enough for me in a pinch.
#LevelHike #PlayStation #HDMI
The footage used in this review are used under the Fair Use laws, referenced below:
www.law.cornel...
Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.
(Pub. L. 94-553, title I, § 101, Oct. 19, 1976, 90 Stat. 2546; Pub. L. 101-650, title VI, § 607, Dec. 1, 1990, 104 Stat. 5132; Pub. L. 102-492, Oct. 24, 1992, 106 Stat. 3145.)
Order the LevelHike from Stone Age Gamer by visiting stoneagegamer.com/levelhike-cable-compatible-with-hdmi-for-playstation-1-2.html
Use Promo Code THISROX for $10 off any Stone Age Gamer order $25 or more until September 30, 2020!
Join this channel to get access to perks:
ua-cam.com/channels/znAOWQLsiCAMNRq9fzQJpw.htmljoin
Follow Us on Social Media!
Instagram - @RoXolidProductionsGK
Twitter - @RoXolidStudios
Facebook - facebook.com/RoXolidProductions/
Get early access to our videos and support RoXolid Productions for as low as a dollar a month through our Patreon page, www.patreon.com/RoXolid
Looking for some RoXolid Merch? Check out our T-Spring store for shirts and swag at teespring.com/roxolid-productions-official-s
Would you like to have your products featured on RoXolid Productions? Do you have Questions? Comments? Email us at RoXolidMail@Gmail.com!!
Do you want to send products, donations or gifts for us to feature on the channel? Send all items to:
RoXolid Productions
411 E Water Street
Farmer City, IL 61842
PS1 and PS2 both have great games and are essential. But PS1 is for that special 90s feel and atmosphere. And for that sweet FMV games era. There are some pretty nice ones.
Had to come revisit this video because I'm buying an HDMI cable this week. Also Jet moto is definitely in my top of all games. Hard to master since as you saw the bikes are very loose and turns etc take crazy skill to master.
Which one is the best? I just found all of my childhood games and would decent picture without spending a ton.
Just got a PS2 today from winning a UA-cam contest. Saw this cable on Amazon and was curious if there were any reviews. I just subbed yesterday and today this popped up when I did a search. Thanks for the info. 🎉👍👾
Congratulations and thanks!
PS2 was my childhood console, and Just got my hands on a CiB Fat PS2, finding out these kinds of cables exist is really cool!
Great video man, might just have to pick one of these up
Yes Black is awesome. I have it on the Xbox.... it's backwards compatible with the XBOX one and it upscales Very nicely on that.
It's so good
I also have Black on the xbox one X, great game. PlayStation 2 was probably my fav of the first two consoles.
Did they upscale or remaster it for the Xbox One?
Ps2 was my favorite system
Such a great system
@@RoXolid i even still have my old Ps2 and a Ps2 silver version but the disk drive doesn't work
You can get replacement drives
@@RoXolid i don't know if there is for the silver Ps2 i have because i was using it for backup games since thrift stores sold games that weren't working good
Should be but not positive
I like both PS1 and PS2, but I like the PS2 the best since it plays both PS1 and PS2 games
Hey! What would you suggest without breaking the bank? This? the Pound cable? mclassic? I'm lost at this point tbh
All of these all-in-1 cables are similar, basically an AV2HDMI adapter built into a case. For the money the RetroTink Classic using Composite or S-Video is decent, otherwise if you have Component Cables the RetroTink2X Multiformat is about $120 on their website.
@@RoXolid Thanks for the quick response, I do have component cables but the RetroTink2X Multiformat isn't even listed on the website anymore and the 2x pro isn't available (well the store is closed at this point) I'll wait I guess!
Does it still function when you play a ps1 game on the PS2? I had this issue before where ps1 games would not work when played using the PS2.
I have a tip for all the people that still love a crt, to hook on your old systems.
Buy a (used) plasma tv from around 2007 and up. Especially a Panasonic or Pioneer one. They have the best picture quality.
Go for a model with (at least) real 100hz panel (no flickering).
But the biggest thing is:
They come with HDMI, component, rgb-scart (in Europe), composite, rf, vga, dvi etc connections build in!
U don't need extra devices to scale or whatever. It comes with the best picture quality from the factory.
You can also change the aspect ratio to 16:9, 14:9, 4:3, zoom 1x/2x/3x, auto, etc.
And u can still use your brand new 4k/8k tv for everything else (ps4/ps5/Xbox etc).
My 2019 and 2015 Flat Panel LCDs all have Component, Composite, and VGA. The problem is getting those hooked up when you have so many wall-mounted Televisions now. You also have people routing cables in-walls to hide them (I do this in my living room).
A lot of people want to stream their gameplay out, thus HDMI into their existing capture card is required.
@@HammyHavoc Understood, but for streaming you're better off with something like the RetroTink 2X and Component cables instead.
@@RoXolid Is the OSSC better than the RetroTink 2X? If so, may as well go the whole hog in terms of bang for buck. I think there's a good demographic of casual streamers out there though for who the value of the LevelHike is going to be pretty spot-on.
@@HammyHavoc Depends. The OSSC works great for all my Sega Systems and my TG16, but on Nintendo Systems there are timing issues that cause the screen to blank out from time to time. The RetroTink just works, even if it doesn't line multiply quite as much.
I have the hyperkin, and just bought the levelhike.
The hyperkin have less color and contrast accuracy, but has a more accurate aspect ratio, it firs the screen without even adjusting anything.
The levelhike is more color and contrast accurate, but the aspect ratio is off, the top and bottom overlap the screen, and in my case i cant change the TV format because im using an hdmi splitter.
I have also notice that games that support over 30 HZ has delay.
Somehow missed this one my friend. Checking it out now.
all good, I'm thinking more and more people are going to be missing more and more videos because UA-cam no longer sends out the email notifications
tested this cable alot on PS1 now it might be best option for multi resolution games it syncs in less 1/2 sec when going from 240p to a 480i menu. I could not even read text with composite this adapter made everything clear easy to read. I do wish it was 480p instead of 720p then TVs could scale image @ a whole #
Like the adapter fixed the problem of resyncing resolution changes? I thought that was a TV/monitor issue. I'm having issues with my hyperkin and my 4k TV losing signal after going through menus
I'm a little confused here, is this just for connecting or does it help with the HDTV resolution problem. The HDTV stretches PS1 games so the appear so blurry they are really unplayable, does this help with that issue?
A wireless PS-2 and PS3 controller in one excellent gamepad ROX this is pure joy to my ears 👌👍 awesome review Dude , ,this company's Brawler64 gamepad both
Tried this converter on ps1 to my 4k uhd LG tv and its pretty dam good its not 100% perfect but its close. Its not too tight a fit with my psone slim. For the money you pay its well worth getting. Love how you can go 4.3 old tvs so it's pretty cool. It feels durable and well made. Crash bandicoot 3 looks great and tomb raider 4 looks accurate colours back I the day.
Glad i got this for old classic ps1 games on 4k tv.
it is ok for the money, but people need to temper their expectations.
What is the best hdmi for casual gamers
If you like Black, and the destructable maps.. have you played the original Red Faction??? That game blew my mind as a kid
Not that I recall
@@RoXolid It was the first game I ever played that had nearly completely destructible battlefields. You could grab a rocket launcher and tunnel through parts of the game. it was really fun
@@RetroSetJoe That sounds awesome!
That's a PlayStation Mini in your thumbnail dude :P
Shhhhhh, don't ruin the magic, LOL
And credit for being the first person in over 2 years to catch that!
Levelhike vs OEM component cables vs Generic component cables, that would a great comparison brother. Cheers !!!
Will this work if I’m trying to play ps1 games on my PS2? I currently have an adapter, but when I load up a ps1 game it will show no signal right after the ps symbol
Those adapters don't upscale PS1 games to a resolution that modern TVs support.
That's why PS1 games don't play on those adapters.
That's completely inaccurate. I show PS1 games playing through this cable in this video
Yes, but you don't show playing a PS2 system with a PS1 game. Could you do a video showing you testing this theory?? See if it would work and answering a viewers question. Have a nice day! ,😁@@RoXolid
What are you, some sort of monster, playing in 16:9? Haha. Nice video and makes me want to purchase! I'm sick to death of the resolution switching issue, I don't mind taking the quality hit if it means I can avoid it.
I hear you. If you have Component inputs on your TV you can use the HD Retrovision Genesis Cables + the PS1 adapter and have very good video quality.
I just got one, using a 4K monitor, hooked it up, powered it via the PS2 USB port, changed the video settings to RGB. But, there are some moving, horizontal static lines that pass over the video consistently. I tried a basic PS2 to HDMI adapter that outputs 480 and that works fine. I know the monitor isn't the issue as I've used 720 resolution on other consoles like PS3.
Sounds like a bad ground
@@RoXolid What's that mean? 👀
Those cables are like those AV2HDMI adapters, often they are not grounded will which can lead to Video and audio noise
@@RoXolid Is the solution to replace it? Like they're faulty?
Would you recommend this Levelhike or HD Retrovision for the PS2?? I like that the Levelhike can be switched to 4:3. Idk if HD Retrovision can do so or not
AMAZING. thanks 4 this review!👍👍👍
Thanks for checking it out!!
Just got mine for my ps1. I had to plug in the microUSB cable for it to work. I can also attest to the very tight fit. I didn't think it was going to fit at first
That seems pretty typical
My screen is green, I can see there's a setting in the ps2 to change that but what about ps1?
Just got one of these cables and can get audio but tv displays invalid format
I have a unique question for you. Can you play your PS2 system with PS1 games with this levelhike adapter??
Considering the Levelhike adaptor uses an RGB output signal, most likely works
Awesome set up!! Great work!! Thank you!!
Thanks, I appreciate it!
Interesting. The Hyperkin one I bought doesn't seem to blow up the reds. I think it was revised because it has some things I didn't see in UA-cam reviews. They also seem to have revised the Genesis cable. Idk. I agree on Jet Moto. I tried to like that game as a kid. There's a following for it though. I think someone finished a version that never released. Oh and yeah Black is amazing!!!!
I agree
The picture quality is fine enough for the price, but I can't play with noticeable lag. You said "no real problems" with latency, but was there _some_ issues? I'd like to know for sure.
These cables will introduce some amount of lag and latency, but it was something I did not notice as I played. For me, it did not hamper my gameplay, but your mileage may vary.
@@RoXolid Thanks for the quick answer! Really appreciate it.
I can't find actual latency tests for this cable so you can't really be sure how it performs against something like RAD2X/RetroTINK. I don't want lag at the same level as something like a Pound cable would produce.
@@Moshugaani This is 100% NOT as responsive as the Rad2X and RetroTink, those are VASTLY superior in every way. If you're even considering those or this cable, go with the Rad2X or RetroTInk, you'll be much happier.
@@RoXolid This video by RetroRGB says that LevelHike's SNES cable introduces approx 85 milliseconds or 5 frames of latency: ua-cam.com/video/7VOsOuQ5mhM/v-deo.html
Would you say it's true with the PS2 cable as well, or is there a difference?
I would say the main portion of the converter is likely the same from system to system. I know Bob, I respect him, as such I would say his assessment is accurate and similar for this cable.
I see that you plugged the LevelHike to both PS1 & Ps2 to test, but how good does PS1 games run & look off the PS2 console?
I generally don't play PS1 games in the PS2 as the emulation isn't completely accurate.
@@RoXolid I thought only the ps3 is using emulation for ps1 games. The ps2 is equipped with ps1 hardware. And I tested it with all of these things. Ps1 games on a ps2 is exactly the same quality as playing on a ps1. If you're playing ps1 discs on a ps3, it looks "different". The sound is also a little off compare to the ps1/ps2 hardware. (especially the volume between music and sound fx ).
The very first ps3 (launch model) is backward compatible with ps1 AND ps2 discs. And this model has also the ps2 hardware build in -but it uses HDMI as output-. That's why it looks Amazingly good if you play ps2 games on it.
I can't remember if it's also equipped with ps1 hardware. I have this model but it's in the box right now. I will test it out asap
Whether you are using software or hardware, it's emulating the original system. That being said, check out My Life in Gaming, they have a whole video dedicated to the PS2 that is awesome.
Why don't people just buy a small LCD Sony Bravia with component inputs?
Because I want a bigger TV
Will this play PS1 games on the newer HDTV monitors? I have a HDMI dongle from someone else that will play PS2 games but the moment I put in PS1 games the 240i resolution is too low for the newer monitors to display, All you get is the dreaded black screen/“no signal detected”.
I’ve been looking for a solution (that doesn’t involve composite AV cables since that looks horrible) and so far it’s been rather difficult to come by.
Yes.
Wow, I just got mine, and I'm honestly worried about forcing it in. I wrote the seller today, asking them if this is normal. Thanks to you I see it is. Do you think that will damage the connector? Also my PS1 was not the slim.
i have a Tomee s-video cable and the fit is the same, most 3rd party cables have the same issue, i did used my s-video cable for a couple of years without any problems.
hi , if i have a PAL console , will this cable work with a North american TV (LG oled 65")?
Not sure but I don't think these work with PAL systems
Did you have to set your PS1 to 4:3 to get the sound to work correctly? I did so asking if that's what you had to do for the sound to work on your PS1.
I honestly don't recall it's been so long since I tested this and I haven't used it in a couple of years. But I'd be curious why an aspect ratio switch would affect anything on the sound
Hello, i got the levelhike cable for ps2 after watching this video. But the picture is very small, on my 55ich tv how can i fix this ?
I think it has a 4:3 /16:9 switch, check to make sure that's set right. Beyond that, no idea, sorry
@@RoXolid it is on 4:3. Just found a setting on my tv, sony bravia, widescreen mode, and when it is on normal you get a small screen, and when you select full screen, i get a bigger picture. There are now only black bars left and right.
I got the same hdmi adapter but my tv makes a hissing noise with this setup. It isn’t too loud but I can hear it at times. I contacted the manufacturer but they said it’s “normal and won’t mess up tv speakers” idk if I should take their word for it. And my tv is definitely not the issue because it’s an LG C1 that works well with everything else.
I've not heard of this issue, sorry
great vid, any thoughts on the pound cable?
Yeah, the Pound cables are.. Well not great. Poor audio and visuals
@@RoXolid oh really, was about to order one. guess i'll try the levelhike
When I have this cable connected to my PS2 it works flawlessly but whenever I put it on my PS1. It works just fine booting up a game and just being in the menu screen. However, like when I go to start the game the screen just turns black and then like every few seconds the TV tries to regain signal and it shows a picture for like a brief second. I noticed by switching the aspect ratio on the cable itself seems to fix that issue. I noticed you mentioned something similar with you capture card (I have my LevelHike cable connected to an HDMI switcher). Did you ever find a solution where you don’t have to manually change that setting or having to disconnect the cable every time? 😅
I have not, sorry
Hello! I have a levelHike but whats wierd is that it seems to work fine on my pc monitor but on mu sony hdtv i get only sound, no image at all..any idea what might be wrong?
I tried changing ps2 setting also.
Did you switch to YpBpR output?
hey man, did you fix this?
Finally a cheaper cable that uses RGB for PS1 id personally rather not play at anything else ! BUT levelhike should have just used 480p modern TVs scale just fine & ALL TV support 480p its DVD resolution. I wish I knew why Levelhike used 720p at least 1080p would have been an whole # integer scale of 240p which is PS1's resolution. I get black bars on top & bottom of my TV when in original 4:3 mode. There is a little noise in both audio & video line I guess its expected at this price & not really noticeable from couch a RAD2x is not in stock where I live & twice the price
What you can also do is HD retrovision does offer an adapter where you can use model two Sega Genesis component video cables with the PS1. I recently got my hands on one of these adapters, they're out of stock for a long time.
Thanks.
Is this cable slightly better than the Hyperkin cable? I currently own a Hyperkin cable
There's not a significant difference to justify you buying another cable
was it able to usb power via the ps2, or would you need an actual ac adapter for your usb?
I honestly don't remember, I think it was powered from the system but not 100% sure
I feel like if you combined this cheap adapter with an mclassic it’s a perfect combo
Oh no, you need to see it via Component HD Retrovision Cables, going through a RetroTink or OSSC, so sharp!
I ordered my ossc yesterday after selling my retrotink. I’ll let you know how the setup changes. Got almost everything perfect.
@@RoXolid I got everything in my setup running on rgb and hd retrovision cables except my dreamcast which I have an akura for, my ps2 and my n64 are the only thing I’m still working on, n64 needs an rgb mod and I’m just waiting on items. Are there any good surge protectors you recommend looking to get 10 consoles plugged in at once without melting my outlets.
What capture card do you use? I also have this hdmi but I can’t record his game screen
I've used 3 different ones. I started with an EZ Cap 284, but it doesn't do 60FPS. I then got an ElGato HD60S for streaming, but I didn't like that I always had to have my computer, with its loud fan, running to record footage. I currently use a Happauge PVR 60 Pro and it's decent, but the recorded black levels are a bit soft. It does do 60FPS though.
Have you tried this cable on the PS2 with the Mclassic, any difference?
I have not, I currently use Component cables with my RetroTink Multiformat with my PS2
I just bought this o got a replacement both I got have no signal I wonder if I'm setting it up wrong or if it's just another defective cable any ideas I don't have an extra capture card just this cable I heard I didn't need a capture card for it to work any tips?
It should be plug and play, you plug it into your system, connect your TV and you should be good to go. What system are you trying to connect? PlayStation 1, PS ONE, PS2 or PS2 slim
@@RoXolid it was the PS2 and I figured it out the usb cord just didn't read when it was plugged into my tv so had to plug it into the ps2 sadly the ps2 I just recently was given as a gift i can't really play well because the controller port for controller one is way to lose so the controller keeps falling out or Just the system cant fond the controller so constantly plugging in a controller is kinda messing up my gaming experience but my ps1 works fine eventually I'll get a working ps2 the controller port is the only issue with the ps2 that I'm aware of and I'm not the type that can fix electronics especially saudering then my friend is decent at fixing electronics but not saudering so it's probably cheaper just to buy a working ps2 without any issues
it is possible but only when wired to sync on green to get 480p via RGB ill have test it more to see before id use it for PS2
Gotcha
hi, the levelhike or the hyperkin in terms of image quality?
I thought the Levelhike was better myself
Hey guys! Really appreciate the content! I recently bought a PS2 slim on ebay, its having this issue where on startup it works great, however everytime I try to change games and restart the console, I get a no signal on the tv and have to wait 2-3 hours before it starts up fine again. I purchased an hdmi converter and have changed the video settings in system configuration. Wondering if anyone else has had this problem, or if my console is faulty. Thanks!!
That almost sounds like an overheating issue. I've not experienced it myself, have you cleaned the laser lense? Also, try standing the PS2 on it's side and see if you still have the issue.
A lot of ps2 games are using different resolutions too. Like 240p, 480i, 480p, 720p. Sometimes it even changes during gameplay (between the menu -or pause screen- and the actual game).
A lot of (newer) tv's have problems with this.
Ps1 games 240p.
Test it with a couple of different games.
A lot of games support 480p instead of 480i (most common for ps2). Only with component cables (or other cables that uses this signal instead of RGB) u can use 480p.
Games that support this, have the option on start-up, or on the video menu in the game. And others I have to press Triangle + X (hold) while the game is loading in the beginning.
2:50 this cable immediately loses my attention upon not being compatible with "the yipper" *(YPbPr)*
I already have the RAD2x & PS1 HD Retrovision for the 5th generation console, and while I have the PStwo HD Retrovision, I still await a more direct HDMI solution for the 6th gen console
I like both consoles, they each have at least one game I would play on original console, although I use the PStwo more as a karaoke machine because there's a library of _Karaoke Revolution_ & _SingStar_ games
You have definitely progressed beyond this cable, I would concur
ps2 is the best i am thinking getting one of those i have VGA to HDMI and HDMI to VGA I am glad they make them
Go HD Retrovision Component cables into a RetroTink2x Multiformat and call it a day
Can it display PS1 games on PS2? I have a PS2 to HDMI device and there's no signal for PS1 games after the PS1 startup logo
I'm 99% sure it does
@@RoXolid According to one website, it does work with PS1 games on PS2, so that’s good
Can I connect the usb cable to the TV? It's 5v
This is not connecting my PS1 to my monitor 😭😭😭 someone help me
Depending on the monitor resolution this may or may not work. Try setting the monitor to 720P or 1080P
Just bought this from Amazon today for my fat PS2
Very cool!
Me too! I have been trying so hard for the past year to get Scarface and GTA Vice City Stories to look good and get rid of the jagged edges I'm just now hearing about this and I got mine coming in the mail soon, today I went to our local antique store and picked up Sly Cooper 2 in Ratchet deadlocked I'm praying this works and makes it look better in 1223 when you're standing there I can kind of see a little Jagged edges on the bridge behind ratchet but if you have seen what Scarface looks like with component cables then that looks a hell of a lot better and I bought cyclone cables component cables to hdmi converter for my 55inch roku tv and it looks AWFUL.... LIKE so hard to look at awful lol, I'm praying this works!
These work decently, but if you really want great looks go with Component video cables and a RetroTink, looks AMAZING!
@@RoXolid if I go the retrotink route would you recommend the mclassic as well or kacio component adapter ..?
I'm going to be very blunt here...
Ahem...
Nothing against you, getting this out of the way....
Ahem...
KACIO STEALS IP FROM OTHER COMPANIES, AVOID AT ALL COST AND DO NOT REWARD THEIR TERRIBLE BUSINESS PRACTICES!
That is all :)
How does it visually compare to the retrotink 5X?
Not even close, the RetroTink is vastly superior
I have the UK version of this and have a problem
With the audio. Their is a high pitch sound constantly. Has anyone had this issue either UK or other country’s?
This is the only one I have found that lets you play PS1 games on PS2 and the audio is the only thing holding it back for me.
I have not had that issue, have you reached out to LevelHike?
Yeah I actually got a reply today.(it’s what I get for being impatient haha) It seems the US has an updated version that is not in stock for the
@@walshywalshification Sounds good
Had the same issue with mine for the Genesis.
I bought the Level Mike for Ps1/PS2. The screen was flashing and lost signal.
I would contact them for a replacement
Does anyone know what USB cable this upscaler uses, is it the standard USB-C? I don't know if Amazon are including either an HDMI cable or USB-C cable (I've got spares of both) in the order. There's nothing on the page to indicate one way or the other. Stone Age Gamer seem to indicate that the cables are included, but they're out of stock themselves. I've already ordered it from Amazon.
Micro USB
@@RoXolid but is a Micro-USB a USB-C cable, or something entirely different?
@@Nightopian1982 Micro USB is just that, Micro USB, completely different than USB-C. It pre-dates USB-C.
@@RoXolid is it USB male to Micro-B required?
@@RoXolid yeah I've just found that out. I've ordered a USB 2.0 A-Male to Micro-B cable from Amazon now anyway, so I hope it's the right one. It looks like the same connection as the one into the Levelhike HD upscaler.
Is the 16:9 mode real widescreen, or is it like a stretched image?
Stretched
You can get the real widescreen in some games that are compatible with 16:9
Are there any difference between this and the Pound HD link cable?
They are pretty similar, one is a little brighter than the other, I can't remember which though.
The aspect ratio switch. With Pound you're stuck on stretched widescreen.
I thought the picture could be better, way to dark to. Honestly rox im going to get the kaico adapter, which uses a component signal
Stay away from Kaico, they steal/copy other company's design and rebadge them!
Really? Well whatever you might call it, its still one of the best choices. Ive seen the dreamcast version, which works flawlessly, im also considering those high end component cables from hd retrovision. I honestly wish chimeric systems made one for the PS2, as i have one for my modded x box. They make the best hdmi adapter on the market, go check it out if you have an original x box
Yes, they were so blatant in their copying on the RetroTink 2x that they even copied typos! And unlike the OSSC which is designed around open source software, the RetroTink was a ground-up design by Mike Chi. See more at www-retrotink-com.cdn.ampproject.org/v/s/www.retrotink.com/amp/retrotink-2x-cloned
Does this work on the og PS1? (Not the PS One)
It works in PSOne
Black crush big time.
I'll have to check it out
Black is not as good as it's been made out to be. It gets pretty dull. And the PG13 feel doesn't help either.
PS1 will always be the favorite
Is it better than pound and hyperkin?
Similar to Hyperkin but better than pound
How do these compare to the generic HDMI adapters?
They are better, but they don't compare to things like a RetroTink for example.
@@RoXolid Thanks. Is it noticeably better than the cheap adapters? As in, is it worth getting one if you already have the cheap adapter?
@@jaymonster81 I would say so. They are grounded much better and don't have the Audio interference and issues that I've noticed with those garbage AV2HDMI Adapters
@@RoXolid I meant the PS2 to HDMI adapter dongle. Would you still have the same opinion?
@@jaymonster81 Like these:
www.amazon.com/Converter-Adapter-Monitor-Supports-Display/dp/B07FCYLVVY/ref=sr_1_3?crid=VJIA4CCZ6YSV&keywords=ps2+to+hdmi&qid=1643237135&sprefix=ps2+to+hdmi%2Caps%2C92&sr=8-3
I've never tried them but I've never heard good things about them. Lots of lag, interference, and latency
Can you show gameplay with scarface the world is yours thru these cables ?
I don't own it, sorry.
@@RoXolid just curious , thanks anyway. I have the game and will upload gameplay when I get my cable in the mail
Gotcha!
@@RoXolid what tv are you playing on?
I have a 65" 2015 Samsung 4K
Does this work when you play ps1 games on ps2?
Yes it does
Amazing ty
You're welcome
I haven't played Jet Moto
I hadn't either until this
Is the tv 1080p,or 4k?
The TV I play on is 4K but the capture is 1080P
Are these cables better than POUND HDMI cables?
I think the LevelHike are a bit of a better quality
@@RoXolid wow thank you for responding really fast do you think you can do some video comparing different HDMI cables for the original Xbox
I'm not an Xbox expert so I'm really not the right person to do that, sorry
@@RoXolid that's fine I do thank you for responding back real quick enjoy your content have a good day
Thanks for watching! The best I can say is that I've done videos on multiple cables, watch them back to back maybe? Also, check out the video I did on the Xbox thru the Retrotink 5X, you won't believe how good it looks!
At $30 on Amazon, I feel ok with trying this out considering I got a $25 gift card to spend... can't make my gen1 ps2 worse right 🤷♂️
Correct, it's not going to magically make your PS1 games look like a PS4/5, but it will look decent
@@RoXolid im primarily gonna be playing ps2 games, but even then, just need a more convenient way to hook up than RCA...
@@svpracer98 This will definitely do that for you. Also, if your TV Has component video inputs, the HD Retrovision cables would actually provide a better quality image:
castlemaniagames.com/products/hd-retrovision-ps2-3?ref=RoXolid
@@RoXolid unfortunately I don't have component avaliable, thus the search for something hdmi compatible. After seeing your review and a few others, I'm convinced this will suit my needs... the problem with most of the other "converters" is they kept upscale the image/ aspect ratio, which I didn't want.
Thanks!
Of course. One final option would be to go with something like the Component cables and a RetroTink 2X Multiformat, that would be a beautiful option as well.
Will it let me play PS1 games on the ps2 console without losing signal?
I've not had an issue
Does this fit on a ps2 slim?
It does
@@RoXolid good thanks I’m gonna use it with my Mclassic cable I’m sure it wouldn’t do too much yet games would look much clearer and pretty smooth in the monitor
That's true
Ps2 slim dvd video compatible?
It is, but you can't play DVD back with this cable on any variant.
@@RoXolid But why don't these adapters allow you to use the ps2 as a dvd player? I bought the one ranging from "Component to hdmi" easycel but it also works only with games! will they only transmit the rgb signal ????
They did this for piracy reasons, which I mean, is a reason. Not a good one but it is
@@RoXolid thanks!!! Salut dall' italia ✌
Salut! ua-cam.com/video/kruUG_XgBsc/v-deo.html
PS2 was a great system... but I always have been a bigger PS1 fan
I'm the exact opposite, I like the PS1 okay, but I much preferred the PS2