How to Rebuild your CVT Clutch - Polaris RZR Turbo S XPT RS1 - Plus Tricks and Tips!
Вставка
- Опубліковано 20 кві 2021
- How to rebuild and replace the wearables in your CVT clutch system on your Polaris RZR. Tricks and Tips to help you along the way.
👕Merch: shop.talentlessoffroad.com
📕 Facebook: / talentlessoffroad
📲 Instagram: / talentlessoffroad
🏍 David Allen Racing: www.davidallenracingmotorspor...
🏁Gatekeeper Designs: / gatekeeperdesig
🚒 The Heroes Operation: theheroesoperation.org/
🤟 Glove Dryer: www.neverlimitedproducts.com/ - Авто та транспорт
If you have any helpful tricks or tips, comment them below.
Great video man 💯👍
Thanks for the video. Gonna help me out a lot
Awesome video man. Made my life easy rebuilding mine. 👍🏻
Thanks for this video. This is exactly what I needed to know
Hope it helped.
Nice detailed video my friend!
Thank you!
Dude I just subscribed ...thought I was already ...good job brother.
Better late then never, lol.
Cat is going to be down a bit longer than planned, but new upgrades will make it worth the wait.
I don't have a clutch, but is nice to know how to rebuild one.
It will come in handy when you buy a RS1 or Turbo S!
Good information
Hopefully it helps someone.
To Be Fairrrrr
Any trick to getting the center of the helix to line up so it's even all the way around and centered on the shaft?
Tap it lightly until it's close, than put the inner sheave on first. Should go right on. Then put your outer on, in the correct orientation.
My belt is rubbing on the edge of the bearing towards the drivers side. Distance between primary and secondary spindles are 10.5 inches bang on
The center to center distance may be what they say it should be but that doesn't mean the shafts are actually parallel.
@@TALENTLESSOFFROAD Found the issue. The gearbox was too far to the passenger side by 4mm. Moved it back now all good
So what do you do if you take the secondary apart without marking them not realizing they were balanced?
If you haven't put them back together yet. Line up the marks left by the belt removal tool on the inner sheave to the holes for the tool on the outer sheave. Should line you back up.
Hey where did you get that aping compressor ??
Spring
Team Clutch Compression Tool from Holz racing products.
What happens if those sliders break while out on a ride?
It won't shift properly and may stick a bit.