How to Paint Brake Calipers Fast and Easy
Вставка
- Опубліковано 19 вер 2014
- Paint your brake calipers to keep them looking good and rust free. This video will give you the outline of what you would need to do to paint your own brake calipers. I go over the tools and supplies you will need, the different steps it will take to get a good finish and you can see what the results look like.
Here is the spray paint I used (It comes in other colors too): www.amazon.com/gp/product/B003...
Paint Your Brake Drums:
• How to paint brake dru...
How to change Front and Rear Brake Pads and Rotors: • How to Change Front an...
How to bleed/flush your Brakes: • How to do a Complete B...
Paint Your Brakes: • How to paint brake dru...
Drum Brake Replacement: • How to Change Drum Bra... Wheel Cylinder Replacement: • How to Replace a Wheel... Chrysler
How to Replace a Brake Caliper: • How to Replace a Brake...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: ua-cam.com/users/subscription_c...
-UA-cam Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. - Авто та транспорт
3:35 me whenever there's a minor inconvenience
i like this one
LMFAOOOO. This the one
This comment is gold
MADE ME LOL SO HARD LOL
Hahaha nice
Remember black paint doesn't increase whp, if you want +5 whp per corner you will need to use red paint.
+bbsp but it's a 2 pistons caliber : D
lol
+bbsp FLD fan right here
+bbsp You forgot that besides the red paint you also need a Brembo sticker!
With a white pinstripe, and a brembo sticker
Me: “I want to paint my brake calipers, let me look it up on UA-cam, I’m sure Chris has a video about it.”
Chris: *Has a video about it*
Haha an old one. I should redo this
@@chrisfix Please do!
ChrisFix please I’m going out to make my car look better than ever
Just did this.
Dude me too
It's unbelievable how fast you use sandpaper.
That's years of experience for you
And painting at 5:55
It's almost as if it's sped up..!
@@Kamal_AL-Hinai Nah dude, he is running a 200 shot of nitrous into his hands, hence it looks sped up ;)
He drank NOS
that paint... that's the strangest tint of red i've ever seen
Havnar do you realize how long it took for me to realize what this meant. 😂😂😂
HeyImSLY lol
@@HeyImSLY Very dark red. You need a computer monitor mounted on a $999 Apple monitor stand to see it (haha).
ikr 😁. I said to myself "that's lot work to paint caliper red" and he paints it black. 🤔
@@Joseph-eh4rs Black is the new red?
Dude you always make everything look mad easy, I was so pumped after watching some of your vids, very first bolt took me 40 minutes to get it off. holy smokes Chris,,,, my wife is still laughing,
man preach, took me like 4+ hours for brakes and rotors was worth it though.
Use a breaker bar you get way better leverage
I feel this! I replaced my CV Axle, part shop guy told me I'd be done in 2 hours. Took me like 14 instead lmao
Or then you use brute force on the guiding pin on your MR2 SW20 (probably original 23yo guiding pins in rear) without actually using WD-40 and waiting a couple of days). So running to shops. Ending getting some part from this shop, another from another. Waiting for parts from Germany. 1.5 years later you figure out how, now you think you have all parts you want, how you will go about the Job... And wait for right time...life with project cars. :)
Just whack the rachet with a hammer
3:37 "before I touch this caliper again..."
*touches caliper again*
LOL
This entire comment is literally how I thought of this in my head.
Stolen comment
Literally exactly what went through my head lmfao
You're the Bob Ross of cars
YaBoi Squacks that’s gotta be the best comment I’ve seen on his videos. Kudos
Just a happy little bottle of warm wooder.. right over there :) You see it? Theeeere it is.. just a fine little mist over there, havin' a good time.
He doesn't paint cars tho 0_o
he he he he
LOL..great comment. Bob Ross is the shit.
That high speed sanding was so satisfying...
+1
that's the only reason it was "fast" :)
I WAS GONNA SAY THE EXACT THING LMFAO
man, I HATE sanding, I'll try and find chemicals to do most of the work for me
Supdawggx Supdawgerr me too lol 😂
Great vid, Chris. If you paint your calipers a bright color like blue or red, it's best to paint them silver first. Makes the color pop and uses much less coats of actual color.
Really is that so?
@@942doc1 Yea, it's easier for a color to pop more when it's applied on a lighter color. If you spray, for example, red over black, it's going to take more coats to be as bright as red over white
Wouldn't grey primer do this same thing?
This was back when you could buy rubbing alcohol.
Go to a Dollar Tree
r/woosh
I was just thinking this!
And gloves LOL
It’s always the best beverages
Thank you Chris! Just in the past few weeks watching some of your videos. I've learned a lot of tricks for all my vehicles. Cleaning my inner windshields have become a breeze. Especially on my 89 Trans Am. And I have finally been able to step over to the wild side and wrap or hand paint my interior and trim on my exteriors. Thank you so much...💙💙
Haha before I touch this caliper again [touches caliper] I'll have to change these gloves.
I saw that too lol
"Before I touch this caliper again..."
*touches caliper*
^2ex
ChaotiX "Touching" to hear..
3DFX what?
he means touch it with anything after the rubbing alcohol
*almost 1 year later
Thanks Chris. I learn a lot from your videos. I have started doing my own maintenance lately thanks to your videos. They are very detailed and simple. God bless!
You made it look so easy.
I think I will give this a go.
Just replaced calipers , so not really rusty yet. Seems like a good time.
Thank- you- sir.!
A drill with a wire wheel works good for sanding them off quickly
I was thinking the same thing or a wire wheel on a dremel
I used wire brush on my dremel to remove 12 years of brake dust buildup. Now it looks like a newly cast alluminium caliper. Best result :)
I should probs make a video, this soloution is way better. Unfortunatley every other tutorial video copied chris fixes idea.
Or an electric sander...
@@edg6779 I'm sure ikut works a lot better, but a Dremel is not a common hand tool.
I don't have a car... But I'm gonna watch these videos still so I know how to do this stuff... And it's cool.
Alex B e
NOOOOBBB
Paul Goforth8
You might not have a car, but you could buy calipers and paint them. Just buy ones that you could add to your future car.
that's like getting a girlfriend but deciding you're only going to beat your meat
Thanks so much, this is exactly what I needed. I went like one extra level though when painting them and separated mounting bracket and piston. I masked everything I could and used lubricant as masking on piston seal. It turned out amazing! Also I used same 2000 degree paint but flat aluminum three coats
What you mean lubricant
Funny my dad had me doing this fix when I was in elementary. 40+ ago. Thanks Chris! It's crazy how many subs you have now.that is awesome. Keep up the good work .
i think this is the first one i've ever seen that's not red
+metoob Hart #ImDifferent
Try camo
I'm going blue
@@loganatorexit I have metalic blue super gloss
@@Sephirth0000 sounds sweet
You make some wonderful videos. I love the quality and effort you put in. They are very detailed and I enjoy all of them. It can be about something so boring but when I watch it from you I actually learn something and like it too. Keep it up, you have been a reason I am becoming so intrested in cars
2014: Hey... this is Chris Fix.
2020: HEY THIS IS CHRIS FIX AND TODAY WE'RE GOING TO DO
lol I wasn't as excited to film back then as I was now!
When you are motivated and enjoy teaching others it is reflected in your videos and your voice.
@@chrisfix sure you wasn't without the UA-cam cash
youtube creator morph in real time
Love your videos, I didn’t have the patience to hand sand mine, I just covered everything including the car and sand blasted them, worked perfectly.
i don't understand how he moved so fast when sanding. It took me 5 hours to get all the rust off.
Practice!
5 hours? Lol, you got a brake caliper left?
I just started working on my own vehicles, but wire brushes for drills is a nice time saver! $10-20 for a variety of shapes... (everyone should already have a basic drill... seriously!) and you’re larger areas will be done in no time! Those tight corners will need some TLC but that should save you a great deal of time working those larger areas.
If you watch it at 2x speed he does it 2 times faster
@@droge192 maybe a naked woman doing it.
Just painted my break calipers and I'm amazing at how easy Chris makes everything look
I love everything you do man, I'm not great at car stuff but you make it all look very easy. Thanks heaps Chris 👍
Hiya Chris, love how you speed up the boring parts of the job ( prep ) If only life was like that! I would have loads of time on my hands but I suppose I would soon get bored.
I like your style. straight forward and down to earth. as well as you make use of simple materials for "get the job done" projects that turn out above par. I used stone grinding bits, and went over the top. it's nice and all but unnecessary.
Kenneth O'Donnell Thanks a lot! That is exactly what I try to do! Glad you liked the video!
ChrisFix hi.
how did you put them back? did you have to bleed the brakes and push the pistons back?
ChrisFix Chris what do you think if I sink the whole caliper in a container with rust remover?
When i painted my calipers I used high temp primer before I painted
I felt like the color came out good and did not have to do as many coats
Another ChrisFix video that has inspired me to do more mods on my car.
I think it’s cool to walk up to my car when it’s parked and to see the painted calipers.
I wish I could see them on the freeway too but I’ll have to hope that other drivers notice and appreciate.
There are only two UA-cam channels I view regularly. Yours and Goonzquad. You are the best young man. Patient, smart and a gift for making things and KEEPING things simple. I've saved about ten of your videos for future use and can hardly wait to get started. I watched your video and downloaded your checklist on inspecting/buying a used car. Following your script, I found and bought a 2004 Volvo S40 t5 and can't wait to begin personalization of my car and will calling upon your skills. Thank you so much for a great channel. Enjoy your day.
I'm glad to hear all of that! Thanks a lot!
mine are red and i got like 1.21 gigawatts more power
1.21 GIGAWATTS??? 1.21 GIGAWATTS???
@@chrisfix nah he has an tesla or something like that
Cool, Marty Mcfly
Great Scott!
I only got 0.5 gigglewatts, what did I do wrong
Killer video tutorial Chris!
Thank you for sharing and showing everything in detail.
Nice way to do the before and after with the new rotors. Definitely. Makes a drastic difference.
+ChrisFix it's amazing how fast your hands move! You're like a pro! :P great video as always bro. Keep up the great work. ✌
i think he's flash gordon
Great tips, thanks Chris. I recommend acetone as a wash myself. And as these calipers get real hot,, you want to use always, a high heat paint as Chris does here. And if you want it to shine and last longer...Use a high heat Clear Coat. Or else it will not hold up over time. Unless you believe that a long time is one year. Rattle can paints = Some are okay. Some are not so okay to use in this application. Great video instructional. I paint my chevy car calipers Fire Engine RED, and put logos on them, then clear coat over the logo. Looks PRO>
What clear coat did you use
Definitely gonna add the a quality clear. So primers not necessary?
When I painted my calipers. I used a heat gun to bake the paint on. Plus it dries really quick. 3 coats primer. 3 coats of red. 30 minutes each one. Mitsubishi 3000gto twin turbo. Looks wicked.
I'd have to say it's a useful video. I personally have had plans to do this for a while. And I'm kinda glad I watched. I'm more of a collision repair guy but it's been about 10 years so it's always a little useful brushing up on a few things I kinda let slide.
Next video: How to paint calipers to say "Brembo"
SF just get a sticker
Man, you just gave me a flashback to when my bro had a 300ZX Twin Turbo and we painted his calipers. After he did the painting in red I went back and grabbed some high-temp silver and used a nail polish brush to paint "NISSAN" on them ("nissan" was actually raised letters on the calipers which neither of us noticed until we went to paint them). Ah the good ole days...
out of the 2 million people who watched this, how many of you actually painted your calipers?
I don't even know what calipers are
It made me go to my local pepboys and buy sanding paper, paint, and airplane paint remover which i hope i can just spray on and wait instead of sanding. :P
We do it all the time (saudian people) it's easy and make you car looks great
I haven't, too much work, but it does look nice. Maybe if I paint my car someday I'll do the calipers too
Valkarez just get enamel paint in a can and brush it on. cheap and it last longer than the spray can. also silver makes calipers look factory new.
Chris has always the best way to something! He removed the caliper without disconnecting it. Smart as hell!! Thanks man! I wanna powder coat my calipers but i will need to rebuild all the calipers afterwards. Powder coating uses high temp oven and all rubbers need to be removed from the calipers before they go in the oven 😭
I guess i have to do it your way 😉
Good job on the videos as usual Chris 💯. Just as a heads up they have the high heat clear gloss spray I’ve used in the past on top of the high heat black spray. It looks new and shinny! Just a little something I came across in case you wanted to share with your audience
I'm 12 and I still love watching all your vids Chris, keep up the good work
Awesome Christian! Hope you're learning a lot!
Tip if you're taking them off entirely like I did (to sandblast them and get old chipped paint off): use polymorph to fill in all the threads and holes you want to mask. It's a kind of plastic that melts clear in boiling water, can be molded and squeezed into place then cools and hardens white. Squeeze some into threads, and pinch a tag at the top so you've got something to grab later. Now your sandblaster won't damage anything!
Man you came such a long way from such videos to your current ones. Thank you for all the great content.. and also such ;) thumbs up.
you have definitely gotten better and more enthusiastic at narrating your videos. I look at this one then I go to the Prius video and I just hear the difference. Good job Chris
How much horsepower does this add?
+Clay Martin Grey is only 2-5hp. Red nets you 15rwhp!
ChrisFix lol, awesome. love your videos, by the way.
+ChrisFix Lies! Red gave me NOS!
+Clay Martin 500 brake hp
***** wow, I'm gonna have to paint mine when I get home then. 100hp in my 1988 Toyota Pickup doesn't quite cut it.
Viewers: How many cans of brake clean do we need for this job?
Chris: Yes
Wow... How much you have improved the production of your videos! Not that there's anything wrong with the old ones....
I always use matching spray can caps to prevent the piston grommets from being painted. And always cover the rubber brake lines very carefully!
Just take them off and swap out the lines for beaded.
Rubber lines perish and need to be replaced anyway so may as well .
@@matthewdorricott4514 Sure, just in case the lines are in good shape cover up. 👍
And the bleeder valve?
Just cover the valve with tape or use small rubber hoses to cover
“Take your time with this last step, and we’ll be spray painting in no time.” -> proceeds to sand like the Flash. Lol
Hey
I wish I could sand that fast.....
DjRjSolarStar It takes years of practice hahaha
XD
ChrisFix If you have one, a dremel with a wire cup attachment makes cleaning the calipers much, much easier vs the wire brush.
ASkinnyLlama Thanks for sharing! That is a good idea!
ASkinnyLlama ChrisFix or the dremel wire wheel attachment also.
Definitely gonna try this on my car's rusty brake calipers, nice video!
Amazing DIY. Thanks for sharing. It will help with the brakes job.
You can use petroleum jelly to cover any parts where tape won't work, such as the bleeder valve or the piston rubber inside the caliper. wipes off easily after you're done.
Or bluetac. U can get it into every little nook and cranny and just pull it off after you've painted it
ANY petroleum product will damage rubber parts.
Don't comment if you have no idea about Engineering.
+supersesqui your a douche
supersesqui SAVAGE 😂😂😂
I think it's worth mentioning, Lara Croft is actually pretty hot.
I'd love to see a video about maintaining brakes on an EV, like taking them apart (Like your other videos) cleaning them and putting them back together. Maybe even show off some pads made especially for EV's
Thanks for the video idea!
Love this channel. Most things I think of there’s a video for.
I used brush on rustolium red. Came out awesome.
Thx !!!! I painted mine red and they look so good in combination with the superclean video and the video with the tires. The only thing that i did diffrently is that i used a 180 grid sandpaper and then 230 because it had a lot of rust.
Nice work
thnx
Now when you're working with raw VTEC power...this sort of mod would add around 4-5 BHP to each wheel, correct?
Only if you put some stickers on the glass!! Real car guys know,you have to have stickers,and shiny paint to make real Horse Power!
LMAO....Well played Sir, well played.........
Olny if he painted them calipers red. Everybody knows that red equals fast. :V
every sticker adds 20 horsepower
Red: +50hp
Orange: +40hp
Yellow: +30hp
Green: +10mpg
Blue: +5mpg
Purple: +10mpg
White: +35hp
Brown: -5hp
Black: +45hp
So cool to see that chris increased his video quality over the years
You know it's an older CF video when the greeting is two octaves lower lol but the info, editing, safety tips, and directions are still solid gold!
What do you feel is the benefit of 600 grit on rusted metal? I would recommend beginning 40 or 80 and ending with 100 or 120 for what you’re doing. 600 is a final primer sand before paint, all you did was wear out the 600 on that rusted calliper.
600 will still have a small effect. Check out the texture carefully in the before/after. It turned out really well.
"Before I touch this caliper again" - touches caliper - hahha love you Chris
Great DIY, but I’d recommend one more step below. I used this to re-do calipers on an old but great condition car of mine. I had removed them to rebuild since the parts are closing in on 40 years.
That Rust Oleum high temp paint is a great choice, especially because of the matte color.
What I did after cleaning and scrubbing was to use ospho. This product (you can link from amazon if you wish) converts surface rust and better prepares for paint adhesion. The end result is a better bond and longer, better rust resistance in the long run.
Great video!!
How does this kid end up with 10,000,000 views for this? If I shot a video of "How to pour a bowl of cereal", do you think that would get as many views?
Hey ChrisFix, thanks for the immense amount of the best car repair demonstrations on UA-cam 🐐🐐🐐quick question, when sanding and not actually removing the brake pads, does the metal residue being sanding cause any damage to the pads? Even if you apply the brake cleaner? Thanks man!
thanks for the video sir very helpful👍
Glad the videos are helpful!
ChrisFix
i know right
Pro Tip: Paint them before they get rusty (if you can)
Always a great video, thanks Chris
Your videos are unfailingly fabulous.
Thanks Michael!
Chris is all about details... changing your gloves before cleaning the brakes who does that ? Like it's awesome hahaha
Watched this video and I painted my calipers on my mustang with the same paint. Looks much better. Not all rusty and crusty and dusty anymore 🔥💥💯
Can you please do a series for us newbies going over each system of the car and explain how it all works the main parts and problems that happen in that system...You're great instructing and explaining...Us DIYers really need your channel. Hope you'll do the overview videos soon my friend!!
I like the vid, wish I could see how you taped of the rotor
Love your videos man! Even knowing how to do a lot of this stuff on my own, your videos are just enjoyable & well made!!
Thanks a lot!
I agree, I love doing these jobs on my own, save me the $. Lord knows a tight budget needs a little help.
Thanks Chris! Awesome paint job on the calipers. This is my 1st comment...Didn’t know how to post a comment till today from a You Tube video. Lol...I just painted my rear calipers silver on a 2015 Subaru Crosstrek after the brake jobs...will do the fronts this weekend! Also did my 01’ Odyssey 2 yrs ago.👍🏽
I have done a set of hot pink brakes on a white Range Rover Sport 2017 black package. Actually looked really good once done 👍
Awesome Chris Fix!
Brake clean is one of my favorite liquids. :D
Btw, it would be good to cover the bleed valve, piston and the screw that screws the brake line to the caliper.
Getting an 01 Subaru Outback pretty soon. This video is the start of the 3 month long binge I am about to be on.
Excellent video
Really helped me out
Remember to do this when you buy new calipers . easier to bench disassemble and paint before final installation.
1979mackdriver or buy upgraded ones that come painted already.
pinut187
Correct , Thats the best way . I worked for Plymouth for over 35 years , I started off at the Old North Assembly and I’m partial to factory applied finishes , I’m not saying that you can’t do a good job in a shop and you certainly can monitor your own quality control . But you can’t compare to the resources we had in the Assembly and the conditions we paint under .
"before i touch this caliper again" touches caliper. lol killin me Chris
Very nice Chris ; you are one-of-kind . Very profesional videos. !!!👏
As usual, great results. I wish that I could sand that fast in real life. Lol
I wish calipers came factory painted, it can save everyone a hassle for a while. Barely 6 months since I got my GT, and there's already rust there D:
I know right?!
Red paint give u more PoWwWAaAaaA!
Daniele Dal Col Hahaha, I used some stickers instead.
ChrisFix
Stickers are only a 10kw gain though: I hope you used a lot of them.
Matthew Mitchell You cant see any paint anymore so I think I'm "covered" hahaha
Paint in the bleeder is a no-no... but serious the spray for caliper paint is cheap enough why use the regular high temp and not a gloss where the dirt can be wiped off easy and not sick?
Oh, and use a Wire wheel WAY faster
Look how far you've come. I mean, take a look at that sand paper lol. Info still good 6 plus years after. Ur tha man Chris
You should re-do this video with one of the caliper paint kits they make now. I followed this technique and it worked great for about a year then nearly all of the paint just flaked off. I have a new project car so this time I'm going to try one of the epoxy spray paint kits to see if it lasts any longer. thank you for your library of information, I really appreciate it!
How has it worked out?
Need to finish up with primer to seal it in
This video was very helpful! Unfortunately, I couldn't find any red caliper paint, so I missed out on the extra 10HP it adds. :P
Chris Addams I am glad it was helpful! Haha, to make up for the lost HP go get some stickers for your car. You can easily get like 5hp per sticker!
Everyone was waiting to see you use red paint. What an anticlimax 😤
good work Chris. always learning from you
I just recently discovered this channel and I had to instantly subscribe
due to the amazing..... Everything!!!
These videos are beautifully done
Thanks!
@ChrisFix You are fucking awesome bro .. you don't know how much money people can save by watching your videos
Geographic [] tbh I think he does know...
How does ghis save money? Actually spends it. And the point of his channel isn't "cheap ways to fix your car"
It's yow peopel fix there car, and how your ment to
I have 1996 GT Mustang that I have for 18 years and I have been wanting to do this, thanks!
I help my dad with rims, caliper and rotors painting every summer! really fun and easy plus bring your old car to life lol
Most painters recommend nothing more fine that 320 grit for sanding. The paint adheres much better. So a single sand step with 320 would save a lot of time.
He used really high finishing sand paper. I'm not sure even 320 would be good for such a rust-heavy job. I would start between 80-100 and finish 200-240. Maybe a fast 320 if I was really concerned about looks.
what spray paint could i use for my skid plate so it wont rust or chip ?