How to Paint Brake Calipers in the CLEANEST and EASIEST Way! (Brush On)
Вставка
- Опубліковано 1 вер 2019
- Thank you for watching: in this video I show you how to brush on paint the brake calipers on any car in the easiest, cleanest and fastest way. I was really impressed with the G2 High Temperature Brake Caliper Paint System Set and highly recommend it. Follow the steps I show you and you will get the same great result.
Black: amzn.to/2LiZdt3
Red: amzn.to/494EYXD
Blue: amzn.to/2NL25R2
Yellow: amzn.to/2LhTt2I
Purple: amzn.to/2MQprVC
Green: amzn.to/2UpmSej
Pink: amzn.to/34eJEtD
Orange: amzn.to/2LiZtIx
Silver: amzn.to/2PDmk5B
All other colors: amzn.to/2PDmk5B - Авто та транспорт
YES, I painted the back of my brake pads guys, glad everyone noticed :)
replacing brake pads soon anyway
Here's were you can buy this kit:
Black: amzn.to/2LiZdt3
Red: amzn.to/2LspILc
Blue: amzn.to/2NL25R2
Yellow: amzn.to/2LhTt2I
Purple: amzn.to/2MQprVC
Green: amzn.to/2UpmSej
Pink: amzn.to/34eJEtD
Orange: amzn.to/2LiZtIx
Silver: amzn.to/2PDmk5B
All other colors: amzn.to/2PDmk5B
How is the color holding after a few months?
Ryan Cole holding up well. No issues
Do you know where can i buy this for Europe?
Nope.
Thanks pimp! I love ordering from amazon! And wanted the quality of paint that you had! This will work out awesome!!!!!! Was just talking to a friend about this the other day
Roman, just a tip, you could have used chap stick on the Corvette letters . the paint would not stick to it then after drying you could wipe it off. Worked for me.
So many different videos for spray painting calipers, whether people mask to spray paint in place or they completely remove them to bench paint them. Nice to see someone making a kit to brush paint them. I have 3/4 of a gallon of Fire Engine Red of Tremclad Rust-0-leum rust paint, which is the real oil based paint, before Tremclad switched to "oil technology" paint. I painted the calipers two years ago. Cleaned them with brake cleaner, wire brushed them with a rotary wire brush on a drill, cleaned with brake cleaner again and applied paint with two sizes of artist's brushes. The old oil paint, brushes smooth with a good brush, applies thick and levels without any brush strokes. Little to no masking and no over spray issues. Two coats of paint and then top coated with 2X thick exterior polyurethane clear coat. I took one day to paint the front calipers and a second day to do the rear, helping the drying period along with a heat gun. Although the paint and clear coat have no heat ratings, there have been no issues what-so-ever. Two years later and still looking like the day they were painted. After all, they are just calipers and you get a flashing peek at them through the wheel spokes.
The BRIGHTNESS of the caliper is what made me remember this video and see it repeatedly and KNOW that I need to come back to this some day.
You need to pay your assistant far more than what you originally negotiated for. Hes INVALUABLE!!! :)
Did mine with the same paint, same color almost 2 years ago, and they still look great!
What color is it?
I'm trying to find what hawkins blue looks like in the real world.
Thanks! This gives me so much confidence when my blue paint kit arrives next week.
Dude that looks great! When I came across this video about brushing the paint on never thought it would work. Looks great!
Damn, that looks nice. I am going to do a brake job-I think I'll paint them while they are swung up. Well done!
You definitely had some good help taking the wheels off, too cute 😅
Haha ikr, thanks! 😁
That Corvete it's just amazing 😁
I was dreading taking out the calipers to paint it this is sooooo helpful thanks a bunch mate
Wow finally an honest straight up easy to watch video, thanks brother
I was thinking the same thing!! All the others are way too technical for a simple job. Lol
This paint is awesome. I did mine 10 years ago in red and still no flaking or dulling.
Did you bake?
Redd Brown Nope. Just brush painted on after prep. Followed directions exactly.
@@TheOfficialSheriffBrown after a couple miles you already baked them in
Thanks for sharing this way easier method than most others. Best Regards.
Turned out really well! I was hoping you were going to hit the letters with a white paint and then clear and dry, but I’m really impressed with the color and ease with which you were able to change colors! I have red calipers, but I’d think I’d prefer blue as well! Great job! Thanks
When I painted mine I pulled the caliper off the brackets no paint on the pads. I changed the pads while. It was disconnected. Before the paint cured I took a q-tip dipped in paint thinner and cleaned off the lettering. You and also use nail polish remover if it has not cured out.
This is exactly the video I was looking for. Keeping it simple but looking great. Thanks
I was thinking the same, nice and simple.
This is exactly what I wanted to do on my older Dodge RAM pickup. Looks nice without all the mess of spraying. Excellent job! Aloha. =)
Nice video. It's really pretty easy to take off the calipers and rotors (just 2 bolts), then just put the calipers back on lightly with the bolts and paint them with no worries of the pads (I think it's kind of goofy to paint the pads...my opinion) and no worries of painting the rotors. Literally it's just two bolts and you can remove the calipers and rotors.
Thanks man, that's what I needed. I thought about doing spray, but it look a bit complicated to do that. With this link you provided for the color, and what you showed, look a lot easier to deal with. SO, I'm going to try this out instead. Thanks again for showing a bit of tutorial on this.
This actually looks better than all the other videos that spray painted.
Fax
I used (red) engine paint for my calipers. I painted it on (2 coats) with art brush similar to the one used in the video. It does not dry too quickly, so leaves a nice smooth finish. It looks great and has lasted very well.
Going to try it this weekend
Thanks for the great vid. I have a blue truck and bought the blue G2 to go under my black wheels. I was not sure if there would be enough from reviews where i bought the paint from so again thanks for the vid and the confidence i will have enough paint to get the job done... great looking corvette too ...
Nice job looks pretty straight forward and like you said it's not messy.
i bought this set after watching your video. Great job. looking forward to the weather improving so i can get on with it!! got some brake caliper decals too
Thanks! I'll be trying this project on my RX8 this weekend. Ironically I bought blue paint too. (Offsets my silver car)
Just ordered some for mine in black, thank you for the heads up!
I am inspired by this video now!
It seems to be very easy to do, so it will be helpful. Thanks for uploading the video!
Clean and simple thanks for the video.
I bought the same paint kit awhile go but didn’t get around to doing it. Now that I’m dying of boredom with this quarantine, I’ve got something to do, great video!
Fearless Ghost same here. I bought the same kit one year ago. It has 24 month shelf life so I better start this project.
Great job. Thanks for this. Given me confidence to paint mine over here in the UK.
Need to do ours soon 😂🚗🇬🇧
Well damn, I just bought a regular spray paint kit and now I see this video!? I may end up regretting it! This is badass. 👍🏻👍🏻
I used this Kit and It worked great. Highly recommend. I took mine all apart to clean and paint.
@Sica Rug I did this job on my 350Z. It got new rotors, pads, SS brake lines... So, painted the calipers this same blue.Took them all apart, and about half the day with the wire wheel, WD40, and 2 cans of brake cleaner, etc. They looked so nice, I almost did not paint them. LOL.
@Sica Rug Well, I just painted them a few days ago, and put maybe 100 miles on them. I don't know for sure, how long it will hold up... but I think it is going to be good. The two part paint, went on really nice. Seems like the correct product to do this job. The brush they give you worked fine. I like this better than spray paint... with no additive. I think it is a kick ass system. I put on new rotors, pads, brake lines, HT fluid, pretty happy with it all. I've been shopping for brake kits too. Unless you spend the big dollars, I think this is a good way to go.
@Joe Bidens Leg Hair I guess the issue with painting the back of the pads is the heat?
Fantastic job , will look into that paint..thanks and the corvette is crazy cool .
That makes a huge difference.. I wish I could do that on mine with wide open 5 star rims. Looks so nice
I purchased this about two months ago seen your video just can’t wait to do it now
Looks awesome.
Looks amazing. Big Corvette Fan here from the UK.
Great job and easy also. I noticed that you buffed the inside of your rotors to remove the rust that builds up. Put rust oxidizer on them. It will turn them flat black and they will not rust again.
Looks great man... months later, how has the paint held up? Thanks!
so cute lil man helping u out
Outstanding video brother!!!
Sgt P thank you brother!
Nice, bro! Blue looks great.
It looks pretty good 👍🏿
This was simple i like how you painted the front and back. I havent seen a video where anyone takes the caliper off and paint it. Nice...
PA UA-camrs in the house! Cool kit. I am researching now to do mine. Thanks for the info. Post a follow up to let us know how its holding up!
How has it held up?
This looks brilliant I put some break caliper covers made of plastic 😱 big reget... so now waching this video I going to paint mine ..what you don is a brilliant job 👍🇬🇧
@LactoseTheIntolerant I got my calipers painted and did what you advised on video I really pleased with them thanks for the advice will keep waching 👍🇬🇧
They look great! 👍👍👍
Awesome!!!!! Cant wait to get on this
Looks good man. I just ordered mine not from the same brand but got another one coming in this week but I’ll be painting mine red
OOOO YOU BOUT TO ADD AT LEAST 50 HP WITH RED CALIPERS
Vaan Ravishankar FYI it’s just for looks you imbecile 🤦🏽♂️
D McKerry woooooosh, flew right over your head
D Mac Attack ur so rude hes clearly joking u ‘imbecile’
Thank you. Great video.
G2 caliper paint is awesome. Also excellent customer service from G2 when I contacted them once. Do proper prep and it’s very easy to paint. Once I go around and do the first coat for all for brakes, I can immediately start again for second and third and maybe forth coat on 1-2 brakes until I use up the small can. It usually only chips if you drive on gravel roads. Very durable and very easy to apply after prep (cleaning).
Supporting your channel @Z-speed!
Z-speed thank you!
Z-speed subbed
Good job Bro!
Those calipers look great dude! Nice job!
Looks great !
Hi Roman, nice job! I would definitely take caliper out and put a bag on the rest to prevent paint where not necessary and some tape on the rubber parts of the caliper
Good video, thank you for making it and helping us all out so we can see how easy it is to do!
SHARP!!! LIKE THAT BLUE ON THE BLACK
I used this paint system on one of my cars last year. I put white stickers over the same blue paint you used. They still looked perfect after a whole year, and the white stickers still looked bright white as well. This is an awesome paint system. I did this on an Audi A8, and before I painted I did a little sanding on my calipers to smooth some coarse casting edges. Just something to think about depending on how the factory finish is on your cars calipers. Just that modification got me a lot of compliments and people asking me if that was a factory option on the car.
Beautiful. Thanks
Nice video, thanks for posting it. I f I was doing it I would not have painted the brake pads,
and I would have masked off the Corvette lettering, painting that white or black.
Cool project, nice . Way to go PA , from Jersey
Bro looks good I got the same car and blue is what color I like thanks for the info
I’ve just watched 2 calliper painting vids, neither painter turned the steering wheel to improve front access
😂
He really needed to improve that front acsess 😮😮😮
😂😂😂
They’re practicing for the back where they can’t turn wheel for better access lol
Looks great 👍
This is good method!!! painting like this with the brush, not with spray! Cause with spray you can spread paint everywhere! Well done! Thank you for sharing
That blue is niiiiiiice!!!
Hi, I see this video from 2019, can you please post a pic how that paint held up over time? Also, I think, it would be very beneficial to take caliper and bracket off. 4 screws, 5-10 minutes but that would allow you much better chance to clean and prep.
Thanks for the video !
great video and awesome car!
The blue looks great next to the black. Lovely car.
I like simple !!! very nice !!!
awesome! you so Idea very smartest....i got it thank you so much. i learn now
nice, great job
Great apprentice, he knows what he's doing.
I’ve used this G2system to recently paint the calipers on my Pontiac Solstice! It was amazingly easy and I’m 75 , arthritic, have had three shoulder surgeries and three back surgeries! Seriously I wasn’t sure about removing and reinstalling the tires but it wasn’t that bad and the calipers look great! Ps. It’s up to $79 now.
Now that it’s a year later, does it still look good? I’m thinking of doing the same, unsure on how I want to go about it. That didn’t look bad at all as far as technique.
Great job
Looks really sharp on that car with those wheels.
Great video man, thank you
Thanks for the video,it was helpful.
What did you use to paint the emblems etc blue?
good job 👌💙
I didn't see this video. I was going to make my own but just did all 4 calipers without the camera. It is true. Using hi-temp engine enamel with a parts brush worked great. I had to buy a spray can. Use gloves. Sprayed the paint into a jar and brushed on from there. Easy as can be and the paint flows out perfectly. It was in the upper 60's out of direct sun. 3 light coats and a 4th touch up coat. A little taping off to avoid any spots you don't want paint. Takes about an hour a caliper.
Looks great ! Thx
Yessir, can probably do 2 cars with the kit
Dang that was super nice !!!
thanks for the info
Looks good! I need the red version for my Audi S5 calipers! 🔥🔥🔥
Thank you for leaving the link
The corvette lettering should be white to make it pop
he said in the video hes going to go back and sand them
nice thanks good work
TOP MARKS MATE 👍🏾👍🏾👍🏾👍🏾👍🏾
Nice.
Looks good, I personally would have went with a brighter color i.e. yellow or red but still looks good. Also well made vid
looks nice and easy.. how is the painting holding up ??
little suggestion .... take some sandpaper and sand off the Corvette raised letters on each .. it will stand out so well ... in my opinion anyway :)
Then spray with clear gloss for protection ang longevity 👍🏻
Much better than spraying! Less messy...
It looks cool in blue.
Lucas Martínez Parra thanks bro
@@romagrigorenko You're welcome. What's your next car project?
Lucas Martínez Parra not sure yet. Might share a bmw build my cousin is doing but as for me, I’ll probably enjoy this car until spring comes and will go from there. Can’t really afford more interesting builds at the moment tbh
@@romagrigorenko Alright.
Definately the best method. Looks Great !
I saw you had help though, good thing he was there for you, huh ?🤣
Good instructional, man !
Thanks !
Wulfy