I'll try this. I've always used contact glue that was from a can because it's easy to get. But I've learned it doesn't like heavy materials even though it says heavy duty. I'll have to see if they have a spray gun glue here and give us a try. Always a pleasure to watch mark
Awesome Mark. Will be signing up for the free lessons on your website and I'm looking forward to your pillar build tutorial. I'm about to embark on one of my own here shortly (pillars and sail panels). Keep up the great work !
I’m a retired Professional Woodworker and I use the same gun for spraying Contact cement , same theory I buy them at Harbor Freight for under 20 bucks ,I’ve seen them on EBay around the same money from different vendors
Hey Mark, I hope you are having a great day, I have a question, since you using a lot this adhesive, I'm going to replace side panel, made of aluminum painted sheet, so I need to glue it to the polyurethane foam (it's not the Styrofoam), so if I spray glue I need to slide the sheet under other one, what I'm trying to say after glue is applied, sheet need to be corrected by moving, what is the best way to do it, and how fast it cures? Thanks a lot!
Hi there, this glue is the same used to shoes maker, right? so that looks little thick for use on air gun, so do you use acetone to thin that? also clean noze? and the 1.4mm noze with 60psi would works best, that´s it. thanks dude.
I am making a set of door and dash panels for an old car. Backer board, then foam, the vinyl. The first few panels I brushed on the glue with no issues. I then watched this vid and got a gun, sprayed the glue, and got bubbles in the vinyl to foam layer ……. A lot of bubbles. I couldn’t get them all out, and after it dried it was trash. Had to do it all over. Amy ideas where I went wrong? How do I avoid pits and bubbles when spraying?
I have that exact spray gun (its brand new) and the same adhesive you are using. I can not get any of the glue to come out. Only air. I have the PSI set to about 50 psi. I took the gun apart and cleaned it prior to first use per the instructions. Is there a trick to getting it to pick up the adhesive? I also noticed in the gun manual that it says to use a nozzle head with larger holes when using glue. Is that really needed?
Hi mark!! i live in Puerto Rico and nobody works that brand but instead i can find good spray ready contact cements with other brands at wood workers stores used to work with laminates, you think this kind does the work?
How often to you use the spray gun, daily/weekly/bi-weekly/monthly? How do you keep it from gumming up the nozzle between spraying since you never take it apart and clean it, since it is glue?
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us. We can ship the machine to your country. whatsapp:+ 86131 64576609
In my country we use very thick adhesive some kind of chloropropane adhesive i dont know if sprayer with 2mm nozle could spray much a thick adhesive. What do you think about it
Hey Mark, what can i thin the glue with, i use the exact same stuff it just been sitting on the shelf for a year and gotten so thick now. I don't have an air compressor or gun, i brush it on.
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us. We can ship the machine to your country. whatsapp:+ 86131 64576609
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us. We can ship the machine to your country. whatsapp:+ 86131 64576609
since the gun was never meant to spray glue, use a thinner if you can find out which it uses, if not since it's think use as big of a nozzle as possible which means the sizes used for spraying primers 1.6mm-2.5mm, since those are expensive look up youtube and and it shows how to drill out the nozzle to get a larger hole. don't sweat it, just use this guin as is, it works fine, this isn't that critical unless it wont spray
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us. We can ship the machine to your country. whatsapp:+ 86131 64576609
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us. We can ship the machine to your country. whatsapp:+ 86131 64576609
any size will work, its not being used for anything important. and he said the psi, but that gun was never meant to spray at 60-70, only 25-35, but it's a throw away gun, so test the psi, what ever works is the right psi
Hello,we are manufacturer of Hot Melt Glue Machine and Glue Gun,if you have needs ,pls contact with us. We can ship the machine to your country. whatsapp:+ 86131 64576609
2 things, you use laquer thinner to clean that purple gun, and also it was never meant to spray at 60-70 psi, it was meant for 25-35 psi, roughly, not that it matters because when ts on sale it's $9
@@jovanygarcia2473 no harbor freight has an upgraded green gun $24.99, it's better than the previous purple gun. Get a regulator that's medium priced at HF you need 1/4 npt. You also need the airline couplers, ask the associate working
Good information, but a lot is left out. That purple gun is now only available in a 1.4 mm tip. I called Harbor Freight to verify this. They told me they no longer offer other tip sizes. Also nobody talks about air supply. This is a HVLP gun. Even so, it requires 6 cfm to operate. I want to be mobile. I found another gun that uses 3.5 to 3.9 CFM which matches pretty well with a Makita MAC 2400 compressor. The thing is, it's an LVLP gun by Sprayit. This operates within the capabilities of the compressor which is powerful for its size and very portable. So far I have found no information on whether an LVLP gun can properly atomize the spray grade Dap contact cement. I can get a 2 mm tip for it, but can the cap properly atomize this glue. If not, is there a way to go mobile without having to have a huge compressor and tank? I will only be spraying headliners which doesn't require that much spray time.
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us. We can ship the machine to your country. whatsapp:+ 86131 64576609
I'll try this. I've always used contact glue that was from a can because it's easy to get. But I've learned it doesn't like heavy materials even though it says heavy duty. I'll have to see if they have a spray gun glue here and give us a try. Always a pleasure to watch mark
Awesome Mark. Will be signing up for the free lessons on your website and I'm looking forward to your pillar build tutorial. I'm about to embark on one of my own here shortly (pillars and sail panels). Keep up the great work !
Very professional. Thanks for taking the time to make this video.
Keep these awesome videos coming bro!
I’m a retired Professional Woodworker and I use the same gun for spraying Contact cement , same theory I buy them at Harbor Freight for under 20 bucks ,I’ve seen them on EBay around the same money from different vendors
Hello, what is the tip size for spray glue ?
Awesome video! Do you remove the small screen that sits in the gun to prevent it from clogging or does not occur with this glue?
Hey Mark, I hope you are having a great day, I have a question, since you using a lot this adhesive, I'm going to replace side panel, made of aluminum painted sheet, so I need to glue it to the polyurethane foam (it's not the Styrofoam), so if I spray glue I need to slide the sheet under other one, what I'm trying to say after glue is applied, sheet need to be corrected by moving, what is the best way to do it, and how fast it cures?
Thanks a lot!
Very wonderful idea
Thanks mate. That was hilarious. Wondering how i can order the adhesive from Australia? Amazon doesn't ship to Australia this product.
*awesomE videO*aS alwayS verY informativE*thanK yoU foR aLL youR shareD instructionS***
Hi there, this glue is the same used to shoes maker, right? so that looks little thick for use on air gun, so do you use acetone to thin that? also clean noze? and the 1.4mm noze with 60psi would works best, that´s it. thanks dude.
Will we ever get to see your air setup? I need to go get a tank and compressor, but not sure what to get.
The spray grade adhesive doesn’t seem to be available in uk? Is this right?
I am making a set of door and dash panels for an old car. Backer board, then foam, the vinyl. The first few panels I brushed on the glue with no issues. I then watched this vid and got a gun, sprayed the glue, and got bubbles in the vinyl to foam layer ……. A lot of bubbles. I couldn’t get them all out, and after it dried it was trash. Had to do it all over. Amy ideas where I went wrong? How do I avoid pits and bubbles when spraying?
How did you remove that piece to show the bigger hole in the front of the air gun? (1:40)
I have that exact spray gun (its brand new) and the same adhesive you are using. I can not get any of the glue to come out. Only air. I have the PSI set to about 50 psi. I took the gun apart and cleaned it prior to first use per the instructions. Is there a trick to getting it to pick up the adhesive? I also noticed in the gun manual that it says to use a nozzle head with larger holes when using glue. Is that really needed?
I didn't see the links to the regulator and air separator in the video description. Could you please post those? Thanks!
Hi Mark, I would like to know what I need to be a distributor of your tool for installers here in Mexico
What compressor do I need? Thanks
Hi mark!! i live in Puerto Rico and nobody works that brand but instead i can find good spray ready contact cements with other brands at wood workers stores used to work with laminates, you think this kind does the work?
Is there a way to order boxes made by you?
Can I apply glue with simple spying bottles
What do u charge to build a custom ported box
Hi...are these sprays are good to joint mesh with aluminium frames for making printing screens?
What size compressor are you using?
Can we use Latex with spray gun ?
Hello would that work on foam connecting foam making foam costume and instructions says used that glue and spray gun u we’re useing
Is it necessary or needed to be thinned
what noxzzle size are you using?
Im in az and have gone through like 5 of these lol the heat is too much for the harbor freight gun when i leave half full
clean it with laquer thinner after each use
What size of nozzle are you use for spray glue
How often to you use the spray gun, daily/weekly/bi-weekly/monthly? How do you keep it from gumming up the nozzle between spraying since you never take it apart and clean it, since it is glue?
Just use acetone every so often to clean the nozzle
lol, it's cheap. love that. Straight to the point truth.
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us.
We can ship the machine to your country.
whatsapp:+ 86131 64576609
So I've noticed that if you dont use the DAP for a while it gets thick. Can you thin it with anything. I hate to ruin a half gallon
I'd check the msds to be sure but rumor has it acetone works.
In my country we use very thick adhesive some kind of chloropropane adhesive i dont know if sprayer with 2mm nozle could spray much a thick adhesive. What do you think about it
In the manual for the gun it says 2.0-3.0 for industrial glue
Hey Mark, what can i thin the glue with, i use the exact same stuff it just been sitting on the shelf for a year and gotten so thick now. I don't have an air compressor or gun, i brush it on.
no you can not thin contact cement. when it gets too thick to spray just toss it or you could still brush it on.
it's still on the thick side for brushing, it just don't wet out into the material too good.
DJ Inclined You can thin it with acetone, it doesnt take much to thin so dont go overboard, it does make it spray a little better.
What brand is your contact adhesive spray gun? Nice tutorials!
DAP Weldwood Contact Cement Adhesive, the industry grade one. 1 gallon
Hey Mark, what size tip are you using with your gun?
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us.
We can ship the machine to your country.
whatsapp:+ 86131 64576609
Would this work on a headliner for vinyl
Yes.
where did you buy that big sheet of carpet?
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us.
We can ship the machine to your country.
whatsapp:+ 86131 64576609
Thanks for the vid,what size nozzle is the best for this glue?
Yes, that´s interesting !!!
since the gun was never meant to spray glue, use a thinner if you can find out which it uses, if not since it's think use as big of a nozzle as possible which means the sizes used for spraying primers 1.6mm-2.5mm, since those are expensive look up youtube and and it shows how to drill out the nozzle to get a larger hole. don't sweat it, just use this guin as is, it works fine, this isn't that critical unless it wont spray
@@eksine In the manual it says to use it to spray industrial glue (landau) a needle size of 2.0mm+
The newer 1.4mm tip works just fine at about 60PSI on a 2 gallon rolair compressor doesn’t run continually even though the Rolar can handle it.
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us.
We can ship the machine to your country.
whatsapp:+ 86131 64576609
hey bro. what air hose do you use? 3/8"?
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us.
We can ship the machine to your country.
whatsapp:+ 86131 64576609
you have a link to the gun model etc..
You can buy them from Harbor Freight.
What is the tip size?
1.4mm harbor freight tools
Friggen genius using tape as a pour spout. I hate when adhesive gets all over the can.
What is the PSI and tank size on your air compressor.
Yeah, would have been useful information to know...
any size will work, its not being used for anything important. and he said the psi, but that gun was never meant to spray at 60-70, only 25-35, but it's a throw away gun, so test the psi, what ever works is the right psi
hello, what is the brand of your glue gun, how many mm nozzle do you use, what brand of glue do you use, thanks
All in the video if you actually watch it.
@@CarAudioFabrication You forgot to mention the nozzle size, but yes everything else is in the video.
Where can I buy the spray gun
I need one spray gun
Hello,we are manufacturer of Hot Melt Glue Machine and Glue Gun,if you have needs ,pls contact with us.
We can ship the machine to your country.
whatsapp:+ 86131 64576609
USE THE CORRECT ELEMENT IN YOUR RESPIRATOR !! For NON organic fumes.
2 things, you use laquer thinner to clean that purple gun, and also it was never meant to spray at 60-70 psi, it was meant for 25-35 psi, roughly, not that it matters because when ts on sale it's $9
What does psi do ?
@@jovanygarcia2473 ?? Each gun has a maximum psi. You need to learn how to adjust air pressure
@@eksine with the air regulator?
I’m probably going to buy the gun in his description but I don’t knoww which air regulator/ air separator to get. Can you help? Thank you
@@jovanygarcia2473 no harbor freight has an upgraded green gun $24.99, it's better than the previous purple gun. Get a regulator that's medium priced at HF you need 1/4 npt. You also need the airline couplers, ask the associate working
Good information, but a lot is left out. That purple gun is now only available in a 1.4 mm tip. I called Harbor Freight to verify this. They told me they no longer offer other tip sizes. Also nobody talks about air supply. This is a HVLP gun. Even so, it requires 6 cfm to operate. I want to be mobile. I found another gun that uses 3.5 to 3.9 CFM which matches pretty well with a Makita MAC 2400 compressor. The thing is, it's an LVLP gun by Sprayit. This operates within the capabilities of the compressor which is powerful for its size and very portable. So far I have found no information on whether an LVLP gun can properly atomize the spray grade Dap contact cement. I can get a 2 mm tip for it, but can the cap properly atomize this glue. If not, is there a way to go mobile without having to have a huge compressor and tank? I will only be spraying headliners which doesn't require that much spray time.
M W yup stuck on this myself lol especially being as I don’t vinyl wrap often, may just paint it on with a brush.. just not sure I need a gallon lol
Did u solve this problem i want to buy one for headliner too thick glue cheaper here
what nozzle size do you use?
Hello,we are manufacturer of Hot Melt Glue Machine,if you have needs ,pls contact with us.
We can ship the machine to your country.
whatsapp:+ 86131 64576609
shplurge
Again first comment
Actually, 2nd.... but who's counting?
Can I apply glue with simple spying bottles