How to Replace Alternator 1998-2002 Honda Accord
Вставка
- Опубліковано 12 тра 2021
- Buy Now!
New Alternator from 1AAuto.com 1aau.to/ia/1AEAL00546
The alternator in your vehicle powers the battery and electrical system while the engine is running. If your alternator is failing, you may wind up with a constantly draining battery. This video shows you how to install a new alternator engineered specifically for your 1998-2002 Honda Accord.
• Check here for more videos on the 1998-2002 Honda Accord: • Honda Accord 6th Gener...
This process should be similar on the following vehicles:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
2001 Honda Accord
2002 Honda Accord
Tools you will need:
• Flat Blade Screwdriver 1aau.to/osx/1AXAA00013
• 10mm Wrench 1aau.to/ofb/1AXAA00010
• 14mm Wrench 1aau.to/ofb/1AXAA00010
• 14mm Deep Socket
• Torque Wrench 1aau.to/omk/1AXAA00044
• Pick 1aau.to/odE/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Honda Accord 6th Generation 1998-2002: • Honda Accord 6th Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Thank you for the video. Helped a lot!
Pro tips:
1) Plug the power steering reservoir hole with some rubber so you don't make a mess like I did.
2) Old spark plugs did a decent job at plugging the hose hole. Use the hose crimp on the spark plug so you don't spill PS fluid.
3) Hang the alternator by the top two bolts. Don't tighten them fully. They should almost be snug. You'l want to be able to wiggle the new alternator just a little while you get that lower 14mm bolt in.
4) Have a buddy help you take the tension off the belt tensioner so you can focus on reinstalling and aligning the belt.
2000 Honda Accord 3.0 V6 you must remove the passenger side condenser fan to remove and install the alternator. Condenser fan has a few clips to disconnect and then (x2) 10mm bolts on the top left and right, and (x1) 10mm bolt on the bottom, dead center.
You should specifiy that this is for the V6 engine since the accord was also sold with an I4. I have a V6 so you get an upvote from me but I just got lucky. The title should say which engine it's for.
Edit: The repair worked. Thanks for the help.
wow underrated video man this one should be at the top. I will say im having quite the nightmare trying to put BACK IN that lower 14mm bolt. Its like i get it lined up, try spinning it with my finger, nothing happens.
+Eric Bonewicz Thanks for the feedback! 1aau.to/m/Shop-TRQ
So glad I found this video. A few other videos I could barely understand what was either being said or trying to find what they were doing with minimal light.. nice video thank you
This video lead me right through the install… great video 👍
Dammm best video I've seen yet, perfect lighting and instruction, this will apply to my 2000 Acura TL as well. Instead of taking off the power steering resvior I took off the condenser fan so I could get the ALT out.
Thank you so very much for this video, my husband and I were able to change out our alternator with little difficulty. 😊
Very nice. Clear and to the point. Thanks!
Thank you guys for the video
Thanks for the video - was able to do a backyard job, outdoors, -35 degrees celcius and got er done.
A+++++++ VIDEO great lighting too
I can’t get the last minting bolt off how did you manage to do that with the pulley being in the way I’ve tried all day that’s the hardest one
What tool u use for the small wire with rubber cover
Excellent. THANKS.
Thank you
How hard is it to get that last bolt out
Thanks
Is there no fuse in that alt.
My mistake went back and watched again it was installed 😳
Does anyone know if the 105 amp alternator from a 2001 Honda Accord coupe V6 is a direct swap to a 2002 Honda Accord Coupe 4 cyl? They look awfully similar at a glance. I have a wrecked V6 here I don't have the money for a new alternator.
Nevermind watching this video just reminded me that oh yeah the front end is kind of wrapped around the alternator I ain't getting it out without a Sawzall or something. 😂
This is for the V6 engine not for the 4 cylinder engine model
What’s the average cost (roughly) for the labor alone on the alternator replacement for a 99 Accord?
+L Canton The average cost for a Honda Accord alternator replacement is between $757 and $1,037. Labor costs are estimated between $117 and $149 while parts are priced between $640 and $888.
Wtf. Bought mine for 200 re manufacturered and watched your video the official honda service manual says to remove the condensor fan unplug a cable and two bolts right in front thanks for the video too! Gives more confidence 👍🧐😎
My bad 3 bolts two up top nd one in bottom condendsor fan/
Shroud assembly**
I’ve been going through the worst time finding alternator that fits my 01 Honda. Watching this video I noticed that third party piece. Am I missing that?
Is it just me or did the top bolt not get installed in the new alternator?
Up & easy Japanese 😂 thank you
Why in the fu@k would you be pulling on the plug by the wires and not the plug itself. Pretty amateur stuff