1998-2002 Honda Accord Odometer Backlight Fix (Instrument Cluster Display Removal) 6th generation
Вставка
- Опубліковано 11 бер 2019
- Tutorial on how to change instrument cluster display light bulbs on a 6th generation Honda Accord (1998 1999 2000 2001 2002). Learn what tools and parts you’ll need to replace a burnt out bulb such as the odometer backlight or D4 light. We’ll review all the different light bulb part numbers and do a walk through of how to remove the instrument cluster display, how to replace a light bulb, and how to reinstall the instrument cluster back into the dash. If this video helps you out please subscribe to my channel!
Part # 35505-SA5-003 (Affiliated Amazon link: amzn.to/2Tw8bIV ) replaces the following lights:
Bottom Left
Check Engine
Maintenance Required
Battery/Charging System Indicator
Low Oil Pressure
Top Left
Left Turn Signal
Immobilizer System Indicator
Traction Control System (TCS) V6 models
Top Right
SRS
ABS
Parking Brake
High Beam
Side Airbag
Right Turn Signal
Bottom Right
Seatbelt Reminder
Bottom
Trip Meter/Odometer
I actually made a video showing how to replace this light bulb on a while back, I ended up using a 2721 bulb which I found at a local auto parts store. Check out my previous video to see how I was able to replace it • HD 1998-2002 Honda Acc...
Part # 37102-S84-003 replaces the following lights:
Cruise Control
Part# 35505-SJ4-003 (Amazon affiliated link: amzn.to/2O0hGKG ) replaces the following lights:
Low Fuel Indicator
Temperature Gauge
Part # 37102-SA5-003 (Amazon affiliated link: amzn.to/2XR2Ryn )replaces the following lights:
Fuel Gauge
Tachometer- RPM’s
Part # 37237-SA5-003 (Amazon affiliated link: amzn.to/2NVPDMa )replaces the following lights:
Speedometer
Part # 78181-SS0-003 (Amazon affiliated link: amzn.to/2NXmDDO ) replaces the following lights:
Park
Reverse
D4
D3
2
1
If this video helps you out in any way please subscribe to my channel!
1998-2002 Honda Accord sixth generation - Авто та транспорт
Thank you for the positive feedback on this video! If this helped you out in any way please subscribe to my channel. Hoping to reach 1K subscribers before the end of the year.
My mom has a 2002 Honda Civic Dx and one of the bulb for gear {D} went out so I replaced it. After I replaced one of the dash boad light for {D} , I put everything back together and after I plugged the yellow clip and blue clip back in the unit , the thermostate(temperature) gauge needle goes way far below letter C when I clearly put the needle ON letter C not below C - I just don't get it. Please help me out .
2721=T5 led 37237-sa5-003 and 35505-sa5-003=T3 neo wedge led in simple terms, you're welcome
So the wattage doesn't make a difference when replacing them with led? All I need to look for is t3 or t5?
@@harrybaules yea
Sounds good. Can you recommend a brand? I see lots out there.
😚 Thank you so much for simplifying!
Thanks man
Still a helpful video even 5 years later. Thanks so much for posting this. 🥳😎🤓
Excellent video, thank you. Side note: all Japanese phillips head screws are actually not phillips. They're JIS (Japanese Industrial Standard). Using an American (or other) phillips head screwdriver (Kobalt in video) will increase the odds of rounding them out. Invest in a nice set of JIS screwdrivers and they'll pay dividends with a solid lock in the head of each screw. Works for Honda, Toyota, Mazda, and all other Japanese brands. Vessell makes a nice set. Google JIS screwdrivers to see the exact differences in the head shape.
Not being critical, just pointing it out for others. I didn't know JIS screws and drivers were a thing till ~10 years ago.
Again, thank you for all the details on which bulb goes where!
Thank you for including a breakdown of all bulb part numbers and locations. Straightforward video which includes all necessary tools and procedures to replace any instrument cluster bulbs. Very well done. Thanks again!
Scott Ladner thank you for the feedback!
@@RenePicazo my accord 2003 has a inconsistent intensity knob. When I touch it the brightness fluctuates unevenly. Do you recommend using some contact cleaner to spray the potentiometer? And 2ndly can you confirm if we can just change the bulbs and use the old bulb holders. Or does the part come with the bulb built into the black holder?
This is one of the most professional diy videos I have seen on UA-cam. Very well done. Pleasure to watch and definitely a resource for a future project. Thank you.
I just wanted to say this was very very helpful I was able to replace all my bulbs on my instrument cluster thank you very much 👍👍👍
Glad the video helped! Had to replace a couple myself a while back.
Dude, you are a rock star!!! You have made me feel proud of myself today for standing up against the evil Honda dealership who was trying to charge me 70 bucks to do this! I wish I could like this 1 million times!!!!! I followed your steps and got my dash looking brand new!🙏🙏🙏
I subscribed just because you took the time to post the bulb numbers . Thank you .
Simplified: T10 & T5 bulbs. Opt for LED. I went ice blue and white. My cluster looks sick 😎
not t3 ?
Wow! Perfect instructions and easy to follow, thank you so much, now my D4 light works!
This video is amazing! 🥇Thanks for taking the time and sharing your knowledge. I’ll be referencing your video again soon when I repair my instrument panel. 🏆
Excellent explanation, including part numbers!
Very well done. I now know enough to replace the bulb for the tachometer. Thank you!
oh and a got tip for y'all replacing bulbs: once you remove the bad bulb, always wiggle the connector a few times with the new bulb - i.e. twist the socket a few times back and forth: it helps remove oxidation of the circuit board traces. How do I know ? I had a hard time with one of them until it dawned on me what the problem was.
Thanks dude. I’ll be replacing bulbs in my cluster today. 👍🏾
Great video! Really well done, informative and helpful. Much appreciated!
Awsome breakdown
My I also suggest, when touching the circuit board make sure you’ve grounded yourself first and ALWAYS hold the edges. Don’t touch any other part of the board, a spark can fry it
Thank you, I benefited from your explanation.
Excellent video!
Thanks for the great video. Much appreciated. Well done.
Many thanks! Excellent! I subscribed because you took the time (4 years ago as of this writing) to detail all the information very nicely!
Fantastic video! Thanks so much.
This is really helpful thank you
Very nice and complete video.
Awesome Vid...step by step 👍
Thanks helped a lot !!
Well edited and well informed on your information for a instructional video, thank you so much, this was awesome 👌🤙
Christopher Coleman you’re welcome!
Big thank you, this was exactly the video I was looking for!
Glad it was helpful!
Thanks. Now I know the part numbers.
Hai Nguyen you’re welcome!
Thank you!
Good video good information
Thank you, great video!
Calypso Noximera You’re welcome!
Man nice explained video 👏🏼
Thanks for this (and the shorter) video. Not handy at all and I was able to change a couple of mine.
Thanks a whole lot Rene. 👍 Subscribed
The 2721 bulb also works for the automatic transmission shift indicator in the console.
great video!
😚 Prince Knows...Thank you for simplifying!
Thanks
You are good.
Great job. Good commentary combined with video and arrows. Also appreciate identifying bulbs and part numbers. Perfect speed i.e. not too slow or to long. Did you use special software to accomplish video? Thanks again. As a DIY'er I appreciate your posting. Still driving this car and still really like it. Unfortunately I'm having tranny problems that I'm hoping to fix. Me and car are going together to grave. LOL!
Great video! Clear instructions and good audio/camera work. One question, did you have to disconnect the battery?
Excellent video. Thank you. I wish I knew this before I paid $300 to have new lights installed in my 98 years ago. I’m about to do a 2002 and I definitely won’t be paying that this time. But this one also has an odometer reading panel that goes in and out. Is that something I can just switch out once I open up the panel?
nice video.
Thanks!
Thank you 💯💯💯💯💯
Great video! Wish I had seen something like this last year when I went through replacing all these bulbs. How did you get all of them to light up like that for the video?
well done you earned a sub from me brother
Hello friend, thanks for the video... I wanted to ask you what problem the fuel gauge could be... mine is the same as yours.
would you tell me the numbers of AC light bulbs just like this video I have Honda Accord EX v6 coupe I'll be waiting for your answer thank you this video help me a lot !!!
I attempted to use the LEDs, but for some reason, the LED bulbs I purchased online did not all work well. I just chose to use the suggested bulbs as described on the video. Thanks for the help, your video was excellent.
Thank you!
Are these lights able to be replaced with LED? I had a 04 TL and I changed all the dash and radio/instrument panel with red and blue LED lights instead of that generic pale green. It looked really sharp. I wish I had a picture of it. Like I used a red LED to light up the raise temp button and blue for lower etc.
Anyways if they do make them and you know where I can order the LEDs for this car can you post a link please!
Hey man quick question, recently I opened up the clear cover and accidentally put the gas gauge to the bottom of the ‘E’. I turned it back on and it went backed up, I was wondering if it still reading correctly like I didn’t mess up anything?
Hey man im taking my radio out but i need to replace the housing. Do you hav3 a video or recommendation for me to look at to learn how to do that
Great job. Please how to replace the clock or the watch back light. Thanks.
What if my entire back light is out for all gauges? Error lights still work, just no back light for any gauges.
Great video buddy 👍🏽 Quick question the dash board isn't turning on. What light bulb would that be? Can I change the color?
Addition :
When you want to remove the green panel,
1. Remove the bulb with wire by moving it counter clockwise (its in the video)
2. There are 3 pins holding the green panel. Straighten up all the pins.
3. Pull down the holder located in the middle of the green panel while pulling it out gently.
That's all
Sorry, my bad. All is the video. Great Job, Rene. Thanks to you, I replaced my odometer light and D4.
Strange things is, when ignition at 2, the D4 is on for about 3 seconds then off.
The internet says it due to
1. My tranny is bad and need to be check
2. It's normal because stated on the manual
What do you think, guyss?
Do I need to remove the white panel to install the speedometer and tachometer light bulbs?
So when it’s night time and I turn on my lights my interior lights don’t work like my dash bored light it’s kinda there but the P N D4 D3 R 1 2 doesn’t work
Would anyone know the part name and number for the socket where you plug in the T10 bulbs. Thanks.
What if one of your needles is partially out (not bright orange entire length)? Is there a bulb for the needle themselves (tach, etc.) or do you have to replace the needle assembly? I fear I know the answer as I believe these are LEDs...
Thank you for the great video! My 2002 has the D4 light out, and I might replace it soon since I know how to do it now. I also have the clock light out, do you know which part number that is?
D4 is out for a reason no need to replace. Trust me
Can you please do a video on how to replace the radio
Will this b the same fir a 2004 accord 2dr coupe 2.4 cyl
How can i tell if its a bulb that needs to be replaced or a different issue? My speedometer and RPM lights went out but my other lights are fine (gear lights, check engine light, srs, etc) is this a fuse issue or something worse?
My engine light and my door open lights and my gear lights work and I can see them but the cluster and such don’t light up,solutions?
The thing I worried about in doing this was setting off the airbag. Would it be suggested to pull the battery cable first?
Is there any video for Honda Ridgeline 2010 please 🙏
Will removing the cluster cause the airbag to go off of battery still connected?
Thank you.
Does the low fuel light not light when you first turn it on?
Hei, great video! Appreciate it!
I've tried it until removing 2 srews of the first cover.
I tried pulling out the cover, it didnt come out. I'm afraid to use hard force and breaking the cover.
HELP!!!😭😭😭
I had the same issue. Use a flat head screw driver and pry gently along the edges where’s gaps along the black panel and it’ll come outs that’s what I did.
@Rene Picazo my accord 2003 has a inconsistent intensity knob. When I touch it the brightness fluctuates unevenly. Do you recommend using some contact cleaner to spray the potentiometer? And 2ndly can you confirm if we can just change the bulbs and use the old bulb holders. Or does the part come with the bulb built into the black holder?
Shahzad Tazam Shaikh Sorry but I’m not sure. I would suggest posting your question in an online Honda Forum for your specific accord.
Great input super helpful !!! My only question is, I want to go completely LED on the full cluster so what sizes would I need ?
T3 - T5 - T10?
Did you find out anything?
Haven't had a chance do to work but i will find them ,
Im gonna replace all of them Thanks !!!!!
@@wutcamber Once I locate all LED bulbs for the whole cluster I will provide the info in case you or anyone is interested interning there cluster completely LED
From what I can tell it's all t3 leds
@@mburnett84 have you tried t3 ?
You tha man! Thanks.
the temperature gauge was incorrect the part 35505-sj4-003 is a smaller bulb the correct number based on your video is 37237-sa5-003
What type of bulb is for the Temp and Fuel Warning light (Part No. 35505-SJ4-003)? Are they T6.5's?
I've already changed the rest which are T3's and T10's.
Which ones are T3’s and which ones are T10’s???
Okay question. If I wanted to make my speedometer light to a different color, what kind of bulb would I have to buy?
You ever find out?
@@noemah3272 t10/t5 led bulbs
@@mercedeswinz4554 thank you
My clock light went out. Do you have a video on that?
For that man, just ebay it, '98-02 honda accord ex clock bulb', you'll get many people selling that tiny bulb.
❤️❤️❤️
Not sure if you saw my question, but how did you get all the lights to come on at the same time? That way I can make sure all of them are working.
Michael Wilson Not sure if there is a way to turn all of them on at the same time. The image used while explaining the different bulbs was photoshopped. I took images at different times, when turning the ignition, using high beams, using left/right turn signals, etc. All of these images were turned it into one to explain the various lights.
That’s the first thing I was wondering when I saw the video “wow!!! How did he do that?”
Hi, I have 99 accord v6 exl is it bulb 35505-sa5-003 fit? Thanks for reply.
probably not. see above comment on 9/29/20 from HotDog.
My gas light turned on after replacing some of the bulbs. Any advice or help?
Buy gas
Question ... Mi clock bulb accord 1998 is no work
I need know which is the right number or size bulb ? Thank u
The part is 35505-S84-N01 or T3-S84
2001 ex honda accord 2.3 liter, check engine light bulb part number??
35505-SA5-003
Easy to do without a steering wheel
for the rpm light or the fuel light, is there another bulb number kinda like the odometer bulb?
I have the same car what light bulb do I need to get to change the check engine light bulb
Watch the video. He tells you exactly what bul you need!!
Nice video. I hope someone can help me. Mine worked, but sometimes the light goes out. I have to bang the panel once in a while so it can turn back on. Thanks in advance.
Wiring issue gotta find the wire thats shorted cut it at the short and crimp a new wire between it and boom youll have solid conmection but gotta find that wire doing it i habe that problem rn and just waiting for tmmrw to fix it
So I have a Honda Accord 1998 and nothing works only thing works without the lights on is the p line down but when I turn on my lights nothing works on nothing and I don’t know what to do but it’s not fuses my fuses r good
Currently having the same problem
I own a 2000 and my bulvs arwnt burned out but my Dashlights Dont light up at all How do i fix that?
Having the same issue w illumination lights
Aren't the D4, D3, etc. bulbs actually a T5 bulb put in a special socket? Can they be replaced by LED bulb?
Also wondering this....
@@landonrogers8939 I replaced the backlight bulbs with W5W LEDs, just placed them in the Honda socket. Works great, and a lot less heat. A little bit too bright even at the dimmest setting, but not as much of an issue as odometer ciphers going out because of too much heat.
What bulbs are needed for the lights that come on when one of your doors or trunk is open?
Bulb # 194
My speedometer lights do not turn on, Is their a bulb I can replace so it lights up again?
May be a computer that need to be replaced
@@Xtraxcany idea what computer?
What! You forgot to test it for us.
I’m driving 1998 accord v6 coupe so somehow the panel looks different;(
Maybe yours is a manual ?
@@dillonbragatto4705 Those years only came in auto if you had the V6.
is the speedometer light size a T10 or a T5?
mercury not sure about the size of the light bulb but the part number is 37237-SA5-003
Okay thank you
Question my odometer numbers fade how can i fix that
Mine too... I think it's just a normal thing
Loose connection with the pins the odometer is connected to