great review, well planned and executed! right to the point, no blah-blah, only relevant informations. I watched several t-lcm reviews in the past months but this was the one that pushed me over the fence. I only have it for a couple of days but it's an obvious and singificant upgrade from the t3pa, although the modded brake pedal (additional spirng and rubber) did help a lot with the feeling, it's nowhere near this intuitive and accurate, and not only the brake, the other pedals as well. I'm using socks which means lots of dust and fiber around the pedals over the time, now I don't have to worry about it that much neither. the only downside I see now is some occassional squeeking occured after ~10 hours of usage with the hardest springs and 4 washers, now I removed 3 washers and use a plastic one that's twice as thick as a metal washer, applied some grease spray on the springs and the pivot and it's silent again. if you are willing stay on a budget but make the best of your money I suggest to go with it, great value and functionality for the price. thanks for the review SRC!
this pedal set has unbeliveble value for the price! have 3 team mates using them and a another one with that is so unhappy with his v3 that is thinking about buying these. the only con we found out is lateral flex if you are very agressive with heel and toe apart from that for 180 euros is amazing!
By replacing the throttle spring with clutch spring, replacing clutch spring with a heavier one (mod I found on reddit), and running two red springs and all 5 spacers on brake I find these pedals to be pretty amazing really. Dialing the right calibration settings is very important as well.
Great review mate! And I agree, going to a load cell brake is the big thing. I didn't really gain anything going from my CSL Elites to V3's, or from the V3's to the Ultimates. The only thing you are paying for is immersion. More expensive pedals feels closer to how real life car pedals feel.
Excited to see how these pedals will be for me. I used the original pedals in the T150 (not the t3pa, just the two pedal set) and that's all I've ever used, but I had to get a new set of pedals because twice the torsion springs broke in the original set, and upon trying to fix it the second time it failed completely. and you talking up load cells is really getting me excited. I'm also thankful that these pedals don't use torsion springs, but use traditional springs instead, making replacement and longevity very improved. As well as magnets instead of potentiometers. Great review : )
I’m trying to get my pedals for months. Waiting on dell. Finally my ts-xw shipped out. I can’t wait til I get it all set up. I tried the old Logitech wheel and I didn’t like the gear motor feel at all. But at that time. I haven’t heard any other brands. But hopefully this wheel smooth as that say it is and the pedals are good as it is
great video, i used for 3 years the thrustmaster T LCM and they are realy great. 2 weeks ago i bought whit my stupid head the Fanatec DD pro whit de csl pedals. the pedals are realy trash... i send it all back and go back to thrustmaster... and gonna use back my old pedals.
@1:11: "The pivot points are set in a metal frame within the base housing." Small correction: this is NOT correct for the clutch and gas pedals; the brake pedal has a metal reinforced frame, but the gas and clutch pedals only have a metal pivot-pin that's secured in the main plastic base injection molded part. This is a great review for a great pedal set (for the price)! 👍👍👍
Yeah I noticed that small oversight and also as a fix I'm thinking to get one long shaft to fit through all three pedals in place of the three smaller shafts in use as all three do seem to be aligned with one another. This mod should improve the rigidity although you would have to make some holes in the pedal casing I still think it would be worth it.
To everyone who consider to buy them, first put on youtube T-LCM pedals issues... these pedals as they are, can be withouth issues like two years max, if you have a pet, you got to clean them from time to time, which with this construction you cant do any other way then take them appart. Throttle stuck during race is not anything unique, it will happen very often.
i come from a CSP V.1 ( fed up with its sensors instability... due ti dust apparently..., and its "no travel" braking pedal). Now i have this T-LCM, and overall a prefer it. Brake pedal perfect for me ! clutch a bit better, i prefered the throttle of the CSP V.1 . And to solidity feel was better on the CSP. But the T-LCM is very good when you have it under you feet and driving !
Mine have given me no issues as yet and make a massive difference for me. Only real issue i have is I cannot get them to work in the calibration software…been using them as they came out the box for 2 months🤷♂️
Using RJ45 with my TSPC wheel but obviously tried usb for using the set up software, without wheel plugged in…absolutely no joy getting it working but I did some research and it’s pretty common problem. Haven’t bothered in a while as I’m finding this set up pretty good for me, will invest a bit of time into sorting it as I feel I might be missing out!😂 great video btw👍
I just bought this to replace my t3pm but even lowering the pedal I thing they are too tall compared to t3pm and that doesn't fell comfortable to play.. I mean the metal pedal should be lowered for me ..
Just ordered the Logitech pro wheel and currently have these pedals. Are the Logitech pro pedals a big enough upgrade that it's worth upgrading for the price?
The Logitech Pro pedals are better quality pedals, and they feel nicer. But they won't make you faster. If the T-LCM pedals are doing a decent job then it's not really worth buying the Pro pedals.
@@WarPig78 I was thinking about that too The clutch seems way better. Hay I have the open wheel add on rim and the right shifter clicks but seems to stop working. I disconnected the rim restarted the wheel . Have you ever had this problem.
@@SimRacingCorner i moved my sim rig and damaged the cable.. i thought the cable looked familiar.. but never thought it was just an ordinairy printer cable lol. me and my pedals thank you dear sir!
great review, well planned and executed! right to the point, no blah-blah, only relevant informations. I watched several t-lcm reviews in the past months but this was the one that pushed me over the fence. I only have it for a couple of days but it's an obvious and singificant upgrade from the t3pa, although the modded brake pedal (additional spirng and rubber) did help a lot with the feeling, it's nowhere near this intuitive and accurate, and not only the brake, the other pedals as well. I'm using socks which means lots of dust and fiber around the pedals over the time, now I don't have to worry about it that much neither. the only downside I see now is some occassional squeeking occured after ~10 hours of usage with the hardest springs and 4 washers, now I removed 3 washers and use a plastic one that's twice as thick as a metal washer, applied some grease spray on the springs and the pivot and it's silent again. if you are willing stay on a budget but make the best of your money I suggest to go with it, great value and functionality for the price. thanks for the review SRC!
Just ordered a set of these after my t3pa’s failed. Can’t wait to see what this load cell feels like.
Do you like the pedals?
this pedal set has unbeliveble value for the price! have 3 team mates using them and a another one with that is so unhappy with his v3 that is thinking about buying these.
the only con we found out is lateral flex if you are very agressive with heel and toe apart from that for 180 euros is amazing!
By replacing the throttle spring with clutch spring, replacing clutch spring with a heavier one (mod I found on reddit), and running two red springs and all 5 spacers on brake I find these pedals to be pretty amazing really. Dialing the right calibration settings is very important as well.
I've had the T-LCM pedals for 8 months now and they're excellent load cell pedals. Nearly as good as the most expensive pedals out there.
Do you still use them?
Great review mate!
And I agree, going to a load cell brake is the big thing. I didn't really gain anything going from my CSL Elites to V3's, or from the V3's to the Ultimates. The only thing you are paying for is immersion. More expensive pedals feels closer to how real life car pedals feel.
Thanks bud! 😺👍
Excited to see how these pedals will be for me. I used the original pedals in the T150 (not the t3pa, just the two pedal set) and that's all I've ever used, but I had to get a new set of pedals because twice the torsion springs broke in the original set, and upon trying to fix it the second time it failed completely. and you talking up load cells is really getting me excited. I'm also thankful that these pedals don't use torsion springs, but use traditional springs instead, making replacement and longevity very improved. As well as magnets instead of potentiometers. Great review : )
The difference a set load cell pedals makes is significant, these are good pedals I'm sure you'll love them.
I’m trying to get my pedals for months. Waiting on dell. Finally my ts-xw shipped out. I can’t wait til I get it all set up. I tried the old Logitech wheel and I didn’t like the gear motor feel at all. But at that time. I haven’t heard any other brands. But hopefully this wheel smooth as that say it is and the pedals are good as it is
great video, i used for 3 years the thrustmaster T LCM and they are realy great. 2 weeks ago i bought whit my stupid head the Fanatec DD pro whit de csl pedals. the pedals are realy trash... i send it all back and go back to thrustmaster... and gonna use back my old pedals.
Even doing a load cell mod on my G27 was a big step in terms of control with my pedals.
Just ordered these cant wait to try them
@1:11: "The pivot points are set in a metal frame within the base housing."
Small correction: this is NOT correct for the clutch and gas pedals; the brake pedal has a metal reinforced frame, but the gas and clutch pedals only have a metal pivot-pin that's secured in the main plastic base injection molded part.
This is a great review for a great pedal set (for the price)! 👍👍👍
Yeah I noticed that small oversight and also as a fix I'm thinking to get one long shaft to fit through all three pedals in place of the three smaller shafts in use as all three do seem to be aligned with one another. This mod should improve the rigidity although you would have to make some holes in the pedal casing I still think it would be worth it.
@@deantubeful Interesting idea! Please post here if you get that working. Would be interested in that for sure.
To everyone who consider to buy them, first put on youtube T-LCM pedals issues... these pedals as they are, can be withouth issues like two years max, if you have a pet, you got to clean them from time to time, which with this construction you cant do any other way then take them appart. Throttle stuck during race is not anything unique, it will happen very often.
Thanks for the review! I’m gonna give them a try!
Thanks man, the just do it at the end did it 😀
i come from a CSP V.1 ( fed up with its sensors instability... due ti dust apparently..., and its "no travel" braking pedal). Now i have this T-LCM, and overall a prefer it. Brake pedal perfect for me ! clutch a bit better, i prefered the throttle of the CSP V.1 . And to solidity feel was better on the CSP. But the T-LCM is very good when you have it under you feet and driving !
Mine have given me no issues as yet and make a massive difference for me. Only real issue i have is I cannot get them to work in the calibration software…been using them as they came out the box for 2 months🤷♂️
Are you using the USB or RJ45 cable?
Using RJ45 with my TSPC wheel but obviously tried usb for using the set up software, without wheel plugged in…absolutely no joy getting it working but I did some research and it’s pretty common problem. Haven’t bothered in a while as I’m finding this set up pretty good for me, will invest a bit of time into sorting it as I feel I might be missing out!😂 great video btw👍
I just bought this to replace my t3pm but even lowering the pedal I thing they are too tall compared to t3pm and that doesn't fell comfortable to play.. I mean the metal pedal should be lowered for me ..
Highly recommend apex mod for them
I've reviewed that MOD too, it's good.
what is the most easy way to get the brake to reach 100%
having a logitech momo force, i'm really doubting wether i'd want to upgrade the peddleset first, or get a t300 base and wheel first.
That's a difficult choice, as both the T-LCM pedals or the T300 are both significant upgrades over the Momo.
Just ordered the Logitech pro wheel and currently have these pedals. Are the Logitech pro pedals a big enough upgrade that it's worth upgrading for the price?
The Logitech Pro pedals are better quality pedals, and they feel nicer. But they won't make you faster. If the T-LCM pedals are doing a decent job then it's not really worth buying the Pro pedals.
Flette alla pressione del freno 🤔
There's a reason for that and covered in the review, you need to watch it fully.
what is least amount of tention brake like? i dont like too stiff brake. i can imagine its hard to explain but can you try?
You should be fine with the weakest springs, they aren't very stiff.
@@SimRacingCorner thanks, thats very helpfull
is it possible to connect pedals via usb to ps4 and use fanatec steering wheel? i have a usb hub but i don't have a drive hub. Thank you
No, it's not possible.
▶ You can support me on Patreon: www.patreon.com/simracingcorner
▶ Buy a Coffee for Sim Racing Corner: ko-fi.com/simracingcorner
11:02 what is this game?
Automobilista 2
Personally I think the gas pedal is weak .
Way too soft.
I find the resistance is perfectly good
I swaped clutch to accelerator pedal takes 5 min
@@WarPig78 that is easy to do?
@@WarPig78 I was thinking about that too
The clutch seems way better.
Hay I have the open wheel add on rim and the right shifter clicks but seems to stop working.
I disconnected the rim restarted the wheel .
Have you ever had this problem.
hey do you know what that standalone usb cable is called?
i damaged mine..
If you search for 'USB printer cable' (USB type-B) you'll find it.
@@SimRacingCorner i moved my sim rig and damaged the cable..
i thought the cable looked familiar.. but never thought it was just an ordinairy printer cable lol.
me and my pedals thank you dear sir!