How to find Fish (Crappie Sonar Basics)
Вставка
- Опубліковано 17 жов 2018
- How to find fish with down imaging and side imaging sonar can be difficult, but with this tip you should be able to understand when crappie or other fish, trees, rocks, or anything is below your boat as you pass over it. In this video Flopping Crappie shows you how to adjust your fish finder to tell when cover shows up on the sonar and how this will help catch more crappie and other fish.
-FC
SUBSCRIBE ►: goo.gl/bSNkuL
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Sonar I use ►:
On Dash ►:
Humminbird Helix 9 - amzn.to/2q1cnz6
Panoptix at bow ►:
Panoptix Transducer - amzn.to/2Oenz9s
Garmin 73CV - amzn.to/2Ohe7lG
small unit at bow ►:
Humminbird Helix 5 - amzn.to/2CRygcR
Rods I USE ►: bit.ly/2KyswnV Use "FC10" to SAVE!!
Follow me on IG ►bit.ly/2BOA45W
MUSIC BY: Lakey Inspired - Feeling Good
soundcloud.com/lakeyinspired
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
More Videos you should watch...
This MICRO Lure Catches Crappie!!
• This MICRO Lure Catche...
How to FIND Crappie in the spring | Fishing Crappie on Beds!!
• Finding crappie in spr...
This MICRO Crankbait is AWESOME for Crappie | TINY Lure CHALLENGE!!
• This MICRO Crankbait i...
Best BOBBER for Crappie Fishing?!!!
• Best BOBBER for Crappi...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EMAIL FOR BUSINESS INQUIRIES: floppingcrappie1@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Who Doesn't Like Getting Stuff in the MAIL!!!
Davis Lenzen
PO Box 645
HUDSON, WI 54016-5003
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► PLAYLISTS◄
●BEST CRAPPIE BAITS!!→bit.ly/2mxVHOi
●HOW TO LOCATE CRAPPIE!! →bit.ly/2LaEF7u
● CRAPPIE CHALLENGES !!!→bit.ly/2L8Yqw4
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
I have accounts on these...
INSTAGRAM: Flopping Crappie - bit.ly/2BOA45W
FACEBOOK: Flopping Crappie - bit.ly/2BOAXeM
TWITTER: Flopping Crappie - bit.ly/2C7hDoA
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
What I Film With...
Big Camera ►: amzn.to/2taU7os
Mic for big Camera ►: amzn.to/2yd7o5x
Big Camera Wide angle Lens ►: amzn.to/2Jw6KjM
Wind proof mic ►: amzn.to/2MsJAgU
Best GoPro ►: amzn.to/2tboxH8
(Cheap) but good GoPro mic ►: amzn.to/2JJ1UoE
Wind proof GoPro Mic ►: amzn.to/2JuILBJ
Underwater camera ►: amzn.to/2ydoZKG
Chest mount ►: amzn.to/2JLbXoZ
Underwater mount ►: amzn.to/2yfiqah
Camera Backpack ►: amzn.to/2tbafWJ
Vlogging Tripod ►: amzn.to/2mrxadA
Big Tripod ►: amzn.to/2JulIqL
The above links are Amazon Associate links - Навчання та стиль
Appreciate the time you put into these videos. You are an excellent teacher. I have learned so much from you!!
Thank you Davis! Your videos are bye far the best. I replied to one of you videos and you immediately replied and that says a lot about your passion. This video definetly helps and is greatly appreciated!!
I'm glad it could help. Thanks again for watching!
Thanks for taking the time to do this video. Had my boat with my Humminbird Helix for a little over a year, and this makes a lot of the information I need to understand much clearer.
you're welcome. I have a bunch more of these how to videos for fish finders if you need any more info.
Davis that was good when you teach you learn. that answered a lot of questions I can see running a slow chart screen to look for fish and structure then make another pass at the chart speed that is calibrated to the boat then stop and slay. thanks.
When you pass an object, if you hit your cursor, move it over to the object, a reading should appear on the top line of your HB unit giving distance back and distance to the side.
Good to see you again Davis! As usual, always learn something! Thanks
Thanks for watching!
Good stuff! I’m just now getting into sonar fishing and found your videos which are very helpful!!
I'm glad you like them. let me know how the tips work for you on the water. Also if you have any other questions or video ideas, please let me know. Thanks for watching!
I enjoy all of your sonar video's. Thanks for taking the time to put them out there for us.
You're welcome. Thanks for watching!
Thank you for taking the time to do this. Very informative. Please do more like this.
you're welcome. Thanks for watching and I plan to do some more like this video.
This is an information that I been struggling with to understand for a while now!
But your example here simplified it for me,
And I have a way better understanding on how it works....
Glad I could help
Hey brother thanks for your videos I've learned a lot.
Im from Florida so most lakes are shallow and a fish finder is not required because just fishing you learn structure and depth quickly. But using it can definitely improve your results. So your videos have taught me how to use my Garmin correctly thanks brother 😀
Davis ,really like this video I’m going out ina few minutes and try the chart speed ,I think I learn something from you today Thanks 👍
you're welcome!
Thank you Sir. Awesome demonstration of the sonar. I would like to see more about the Side Imaging and reading the shadows. I do NOT use my side imaging much at all. Because I don’t really understand how to use the shadows imaging. Thank you again Sir. God Bless.
Thanks Davis, I never knew there was a chart speed option on my Helix.....now I do and will check it out next time I'm out fishing.
you're welcome. Let me know how it works out for you.
Thanks man. I didn't realize the chart speed had that much to do with my down scan capability. I don't have side imaging on my lowrance reveal but I'm practicing using down imaging to find crappie.
Glad it helped!
Great tips. Thanks for another great video Davis.
you're welcome. Thanks for watching!
Thank you Davis...I have the Solix 12 but I think I can use your tips...Very appreciated and can't wait to try these tips out there!!!!!😁😁😁👊👊👊👍👍👍😜😜😜😜
Thanks, let me know how they work for you.
Absolutely perfect video. I knew nothing about all these electronics as I had never used any. Within a few of your videos, I now have enough of an understanding to know that I now want them Haha. I should probably get a boat first though. I have a few mega millions tickets, let's hope I'm lucky.
Haha, good luck with the mega millions. A kayak is a lot cheaper and you can use what you saved from buying a boat to spend on electronics. I'm glad you're getting value from the how to fish finder series.
@@FloppingCrappie I think I'd be able to get all of the above if I am lucky with this mega millions lmao. Thanks again for the great videos.
Great video, Davis. I really learned a lot, thank you
You're welcome, thanks for watching!
Your videos are so informative and helpful thank you.
you're welcome!
Thanks for the Video. Haven’t received my Lowrance yet but the video was very informative
thanks for watching, glad you enjoyed the video
Great tips thanks
Great video. I’m turning the speed up. 🎣
Thanks for the info, very helpful
You're welcome
Great video Davis !
Thank you!
This is the best explanation video 👍🏻
Thanks for watching! I'm glad the video helped
Thanks for the video it helped out a lot.
You're welcome. Let me know if you have any other questions or video ideas. Thanks for watching!
Thanks very helpful
Hi Davidson , going to get two CCV rods. 7.5’ casting and a 9’ for floats and jigging.
Great job! Thanks
Thanks for watching!
You are a great help!!
Glad to hear that!
Awesome video
Helpful video
Wow.. awesome.. thank you sir.
you're welcome, thanks for watching!
All good stuff as EVERYONE says. Unlike others, you seem to get the camera where reflections are minimal. Keep it up!
Ever try a hood over screen to make things even better?
I've switched over to Garmin units where I can record the screen. So no screen glare anywhere 😁
I have only subscribed to a few channels and your 1 of them, thanks for your time on the water teaching us sonar newbies😁 I do have 1 question. Is the side imaging worth purchasing? I believe it's a 200.00 transducer upgrade?
I would recommend it, if you have the budget for it. Make sure your sonar unit is compatible with side imaging, even if you upgrade the transducer, it may not work with your sonar unit.
Great video!.. When did fishing become so difficult lol...in the days past i had a 12 ft row boat with trolling motor catching fish :)
thanks, and ya I have a small jon boat without electronics and it's nice to just go out and fish sometimes. Thanks for watching!
Thank you what I really need to know is if I Amat a new lake and I need to mark where I put in at…
Cool video
If you move the cursor back to the object on the screen it will tell you how far back the object is from your boats position
I forgot to mention that in the video, thanks for the tip.
It's all scanned in 'real time.' The chart speed should be equal or 1 above the boat speed. I like it 1 or 2 above boat speed.
If you scan at too high a speed, the image elongates - stretches out on screen. My opinion is keep the scan 1 MPH higher then actual boat speed. You will see more accurate images on screen, whether it's 2D, Side Scan, Down Imaging.
I believe those crappie nibbles get those fish biting. First the will steal a few, then they get competitive and I start hooking up one after the other. Works for me. Good info.
Oops switched videos on me. Lol
haha, I like the crappie nibbles as well, especially if I don't have any live bait with me.
Flopping Crappie crappie nibbles
I would like to see you do the same with the Lowrance hook2 7” or 9” TS screen
I have a Lowrance hook 2 I am planning to film a series on...hopefully before the snow flies upnorth.
Flopping Crappie way this weather is acting it might snow sooner than we thank. If not there is always in the spring
New subber here. Thanks for your help understanding this. Feel the thump.
Thanks for subscribing and thanks for watching! let me know if you have any questions, or video ideas. Always appreciate new video ideas!
@@FloppingCrappie my main thing is I wanna learn how to locate crappie on di. In brush piles. What they look like. I just got my hb. Helix 7 di. Today. I have sank 16 brush piles in my local lake and wanna learn how to tell if crappie are on them. Thanks very much. Love your videos.
Infomative vid for sure. How bout a vid for us land locked crappie freaks ?
Working on it, haha. It's been tough to get on the water the past couple weeks. my real job has kept me busy and temps are dipping into the 20s at night. I hope we will have open water through November. I'm not ready for ice fishing season yet.
I saw advertisement ,they put a ping pong ball on the string of there marker buoy 20 ft down, to demonstrate accuracy . It would be neat to through such buoy near schooling crappies . to mark on the surface and see marker on graph.
I could try something like this, thanks for the idea!
Great video but I have a 2d only sonar. At this point in time that is the best I can do. Do a video on how to read one of those.
This series I have filmed about sonar units should help you understand everything you need to know - tinyurl.com/locatefish
keep teaching these radiology classes
I will, let me know if you have any other questions or video ideas. Thanks for watching!
Do have any video on how to do autochart on a river ? i see your from wisconsin also Im looking to chart out The Wolf river and parts of the wisconsin river up in Tomahawk. I have a Helix 5 chirp si gps g2. alot of videos show them charting lakes .Im lookig for more details on charting on the rivers.Thanks you for anything that helps me out.
Just replied to your email.
When you set a waypoint, is it off the transducer or the Unit? That could be 6-7’ difference. Let me know your thoughts. Thanks
This a good question. From what I have experienced (specifically with my helix 5 ice fishing unit), if the transducer is not connected to the display, it will not give a GPS coordinate. My best guess is the waypoint is off the transducer, but i'm going to have to look into this more. Thanks for watching!
Now that a few years have gone by, do you still use fast chart speeds for DI and SI?
I normally set my chart speed to 3, 4 or 5
Another great video man!!! So..... it's been a year.... did you change how you set your chart speed for SI and DI? Seemed to me to be a bigger difference when using SI than when using DI. Also seemed the clarity wasn't effected too much on SI, but seemed like staying with the lower chart speed gave quite a bit more clarity on DI. So my take away from this awesome vid would be in SI, if you want almost real time response, jack up chart speed.... but with DI, I'd go for the clearer image, as even at a chart speed of 4 or 5, it looked pretty close to real time. Would you concur based on your testing of the theory of the last year?
I still set my chart speed to 1 setting above my boat speed. (ex. chart speed set to 4 when boat speed is 3mph). I have found that when vertically jigging and using 2D sonar, increasing the chart speed as high as it can go will give a much more real time (quick response) image.
Nice Shows.Have you ever used Jelifish Crappie Bomb jigs? And what are your thoughts on them?
I have not used them
GREAT VIDEO, DO YOU SELL DVD"S ON THE HUMMINGBIRD HELIX 5 AND HOW WOULD I FIND THEM? THANKS AGAIN. GERRY
No, I don't sell any DVDs, but if you want more information you can watch the entire how to find fish series on my channel. Here is the link bit.ly/2LaEF7u
Did you ever start running a faster chart speed? If so how did it affect the sonar? I typically do the Tri screen with Side, Down and Sonar on one screen. Will chart speed effect all at once or can I run each view at a different chart speed within one screen?
I've been running chart speed about 1-2 above my boat speed. I'm not sure if you can run different chart speeds with different split screens, never tried it before.
What is the overall setting for deeper lake fishing for Kokanee with a Helix 7 ? The water is in northern Idaho and is clear. Fishing 1.2 mph .
Thanks
I've never fished for Kokanee, so i'm not really sure
Thanks for the informative videos. I just subscribed your channel. I want to know if the side imaging work to find big fish like striper or bait fish ? I know it cost couple hundreds more , but if it does help you find fish, I will definitely invest in side imaging.could you do side imaging finding big fish and bait fish also?
Here is a video i made last summer of using side imaging to find crappie. the tactics used in the video should be close to the same when you're looking for larger fish. ua-cam.com/video/tNDl98XUE3s/v-deo.html
Flopping Crappie thanks
@@andyd3540 you're welcome!
Are you going to get Panoptix livescope? It would be great to get more videos of that even if it's just random throughout the videos.
I will be doing more videos on the regular pantoptix, but I don't plan on buy the Livescope. If I didn't have the regular Panoptix already, I would look at getting the Livescope. Right now I'm saving up for the newest version of the Minnkota Ultrex trolling motor, mine is a little under powered.
@@FloppingCrappie cool. I love the panoptix videos. Ultrex is amazing. I love mine. You will too.
I have a hummingbird need to get it set up....can you help me?
Absolutely, you can message me on Facebook or Instagram whichever is easier. Search for FloppingCrappie on both Facebook and instagram.
It was close to real time when going approx 2.1 to 2.5 mph....
How far does the side imaging transducer stick out from the transom. I’d like to make sure my motor isn’t in the beam before I buy one.
I think my transducer is about 3inches in length maybe 3/4 inch wide. I've never had any issue with the lower unit from the outboard interfering with the signal. Is that what you're worried about?
Flopping Crappie yes. I believe the newer side imaging mega transducers stick out about 8 inches including the bracket. My motor is about 8” from the transom so it will be close. I’ve seen where some people have to trim their motor up to get the clearance. I don’t have trim so I’d like to make sure it will clear. I’m not sure why humminbird doesn’t provide that spec given the potential issue.
@@jboat571x9 I was not aware people had an issue with the motor interference. I dont know if there is a solution
what is the solid line to the left of the boat? My 1198 does that as well that I just installed. I was thinking I was receiving a reading from the motor that I didn't have the transducer in a proper position but I guess not
Can you give a me a specific time stamp in the video that i can look at? I'm not quite sure what your referring to
3:30 I'm just wondering what the line to the left of the boat indicator is. It is the solid line and remains through the rest of your video @@FloppingCrappie
@@tlalexander3 it could be interference with the lower unit of the outboard. I will have to see if it shows up the next time I'm on the water.
if your transducer is mounted on the right side then probably since mine does the same. I actually need to move mine up a tiny bit so it doesn't shoot a stream from the back of the boat. I'll see if that helps mine at all@@FloppingCrappie
I use a helix 5 DI. I Try to find fish and and I run over the pond several times. I hardly ever see fish on the screen. But when I get tired of looking I just start fishing. Then I start catching fish and run over the area to see if I can spot them on the screen...still nothing. How do I set my unit where I can see fish on my screen.
You might have to turn up the gain/ sensitivity on your sonar. Also check to make sure the transducer is level to the water. Let me know of this works for you, otherwise I may need more details about your setup to understand why you're not seeing fish.
So it's safe to assume that @ 4 or above ...we can assume that the cover on the screen should be within a boats length or less?
Ya, I think its safe to assume that.
My wife just bought me the Humminbird 410220-1NAV HELIX 5 CHIRP DI (Down Imaging) GPS G2 NAV Fish Finder
I have a question. Images on my down imaging look fine when I’m in motion but elongate and stretch when I’m sitting still. Any idea what setting will fix that issue?
You're down imaging screen is working correctly, images will be stretched out as you down or are sitting still.
Flopping Crappie When I watch you fish over brush piles the fish still look like fish and the brush pile still looks like a brush pile. On my screen they turn into lines stretching across the entire screen. I can’t make out anything. Stuff looks great when I travel over them at 2 or 3 miles an hour so I mark them. When I go back to anchor lock over the spot it looks like a jumbled mess. Gotta be my settings but can’t seem to figure it out.
My boat is still moving/passing over the brushpiles which is why they look like that. If my boat is sitting still over the brush pile, it would show straight line across the screen. The tranducer is receiving the same signal over and over again which is why it shows as a line. It is definitley not your settings. Fish will appear a straight line if the are directly below you tranducer for an extended period of time. Once the fish moves/swims away then the line will change on your screen.
Livescope
If you’re in a kayak, I assume you run your chart speed at 1?
I'd recommend running it at 2 or 3
See 45 water temp., we are at 65 in va. Good video Davis.
Thanks, I wish we had 65 water temp. I fished this weekend and saw 39 degree temps in some bays.
I don’t understand where to cast if u see fish
It could e crappie..
I'm gonna up my speed as well..see what happens
Let me know how it works for you or if you see any distortion in the image
Flopping Crappie I was running 3.5 mph and set my chart to 4 now I'm running 6
and see no distortion and a better image.
well, it looks like I will be running at a faster chart speed now too. Thanks for the update!
Did u fish that school of crappie? Btw, that matching business is a myth. Since these are different metrics, there is nothing to match. If you ask me what is the temperature outside and i tell you 50% you will say ‘ tempersture is not measured in %’. Same thing. Boat speed is measured in mph. Screen refresh rate is measured in herz. Nothing to match.
The matching idea came from the Humminbird website. I guess I never thought of trying to match metrics, just assumed since the Humminbird website had it, it must be somewhat true.
Flopping Crappie well if u drive fast u want ur chart to update faster. Thats fair. But matching boat speed of 3 mph with setting of 3 on chart speed is not what they mean. These are totally different metrics. As a matter of fact, u get better longer arch if refresh rate is 6 when ur boat speed is 3.
@@ifishcatfish I guess I'll have try that out
It is annoying taking people fishing and hearing about someone else's better boat or better sonar or high tech this or that. So I quit taking anyone. Beggars wishing for better in my boat can stay on the bank.