Thank you for this video. I have been facing some challenges in editing purchased svg files. It is proof enough that sellers are also not being honesty
Thank you, thank you, thank you! I’ve been struggling with this for a couple days and the problem was the nodes not being connected. Can’t say thank you enough. I really appreciate the learning tips people like you are willing to put out there. Best of luck to you!
This explanation was perfect, I was putting off trying to fix these in a couple of svg files I’ve downloaded recently, they wouldn’t fill and kept giving me the error about open shapes. I now can fix them thank you a ton . 👍👍👍
Thank you I’ve been having problems with that. I’m gonna try today to re-cut the image that I’ve been having problems with so this video helps me make sense of what’s going on. Thank you.
Love your work, you help me immensely with every video I watch. And on a side note, very much remind me of my boss as a toolmaker apprentice. All the best from Australia 🇦🇺
Very good video as usual, I can't tell you how many time I struggled with weld options before I figured it out. Of course I don't generally search for the problem like you showed, lol. Thank you for your videos. Stay safe.
@@computercreationz thank you for figuring out cup layouts, well, lots of things. Your videos have helped me so many times in the couple months since I got my Thunder.
I purchased a SVG leather wallet pattern on ETSY, i downloaded it and tried to open it in Lightburn, but nothing happened. The file shows up in my Lightburn files, but when I select it it does not come up in the work space. I contacted the seller about it and he double checked it in his Lightburn and it opened fine. Most of the files I use on my laser are PDF, because of this issue. Do you have any ideas or suggestions? Thanks
make sure when your bring in the purchased graphic that you import and not open the file. then check to make sure your layer that was created is on and output is on.
Just what I'm looking for? I downloaded a few files that drive my Z axis to max height and then does nothing? How do I stop that. I didn't know a file could drive my z axis other than me doing auto focus? I can not see anything in the drawing files causing this
if your using LightBurn go to the wrench icon and on the top right hand side be sure your enable z axis is off. that way it can move unless you move the z from the control panel. much safer. Thanks for the comments!
just make sure one node is on an adjoining node (connected) if that changes the shape you may have to insert other nodes convert them to smooth nodes and play with the curve handles to replicate the shape your after. hope this helps. thanks for watching and the comment!
Thank you for this video. I have been facing some challenges in editing purchased svg files. It is proof enough that sellers are also not being honesty
Thank you, thank you, thank you! I’ve been struggling with this for a couple days and the problem was the nodes not being connected. Can’t say thank you enough. I really appreciate the learning tips people like you are willing to put out there. Best of luck to you!
Glad it helped!
Thank you for sharing this, Now I know what to look for with the SVGs problems.
You are welcome!
This explanation was perfect, I was putting off trying to fix these in a couple of svg files I’ve downloaded recently, they wouldn’t fill and kept giving me the error about open shapes. I now can fix them thank you a ton . 👍👍👍
Glad it helped!, thanks for watching and the comments
Thank you I’ve been having problems with that. I’m gonna try today to re-cut the image that I’ve been having problems with so this video helps me make sense of what’s going on. Thank you.
Give it a try, it works!
Love your work, you help me immensely with every video I watch. And on a side note, very much remind me of my boss as a toolmaker apprentice.
All the best from Australia 🇦🇺
I appreciate the comments, thanks for watching.
Very good video as usual, I can't tell you how many time I struggled with weld options before I figured it out. Of course I don't generally search for the problem like you showed, lol. Thank you for your videos. Stay safe.
Thank you for your comments!
Excellent tutorial - thanks!
Glad it was helpful!
Thanks!
Thank you for the tip I really appreciate it!
@@computercreationz thank you for figuring out cup layouts, well, lots of things. Your videos have helped me so many times in the couple months since I got my Thunder.
Helping me figure out.
I didn't actually see you connect the node ends on video; do you just grab one end drag to the other?
Yes if you have toy snap to objects on !
I purchased a SVG leather wallet pattern on ETSY, i downloaded it and tried to open it in Lightburn, but nothing happened. The file shows up in my Lightburn files, but when I select it it does not come up in the work space. I contacted the seller about it and he double checked it in his Lightburn and it opened fine. Most of the files I use on my laser are PDF, because of this issue. Do you have any ideas or suggestions? Thanks
make sure when your bring in the purchased graphic that you import and not open the file. then check to make sure your layer that was created is on and output is on.
@@computercreationz ok, will check my layers, I always import, so thanks
When I import an svg and go to node editing it does not show ANY nodes. How do I fix that?
You have to convert a shape to a path first then you will see nodes. Edit> covert to path
Just what I'm looking for?
I downloaded a few files that drive my Z axis to max height and then does nothing?
How do I stop that. I didn't know a file could drive my z axis other than me doing auto focus?
I can not see anything in the drawing files causing this
if your using LightBurn go to the wrench icon and on the top right hand side be sure your enable z axis is off. that way it can move unless you move the z from the control panel. much safer. Thanks for the comments!
How do you join the nodes without changing shape?
just make sure one node is on an adjoining node (connected) if that changes the shape you may have to insert other nodes convert them to smooth nodes and play with the curve handles to replicate the shape your after. hope this helps. thanks for watching and the comment!
Thanks!
Thank you so much for your donation. I really appreciate it!
When I download a template with multiple images. How do I separate the one I want, like borders? I've tried tools, box, trace etc. 🤔
I’m not sure I understand your question. Can you please ask it a different way?
@@computercreationz when I download something from Google or Etsy sometimes has multiple images like a bunch of scenes like sayings, or trees.
Thanks!
Sue, thank you so much for the donation, I really appreciate this!
Thanks!
thank you so much for your donation. I really appreciate it
Thanks!
thank you so much for your contribution. I really appreciate it!