Samsung Dryer Heater Element Replacement - Model DV40J3000EW/A2 (SEE DESCRIPTION FOR MISSING STEP)

Поділитися
Вставка
  • Опубліковано 29 лис 2024

КОМЕНТАРІ • 672

  • @jburgesslaw
    @jburgesslaw 6 років тому +169

    Great video. Missing one small part about 3 screws on the front panel around the door (2 bottom, 1 top). Also, you can buy the whole heating exchange unit pre-made if you don't want to mess around with switching out the components. Thanks for the walk through.

    • @olschool3740
      @olschool3740 5 років тому +37

      I wish I would have read you post before attempting to use his "step by step" instructions. Extra 20-30 mins doing a WTF yank.

    • @blkhemi3925
      @blkhemi3925 5 років тому +5

      Ran into the same issue! Thanx

    • @phazelvosfreqdetector7580
      @phazelvosfreqdetector7580 4 роки тому +3

      I think you may have removed the wrong 3 screws. There are two rows of three up top.

    • @phazelvosfreqdetector7580
      @phazelvosfreqdetector7580 4 роки тому +1

      Sorry, I was wrong. In progress!

    • @tjmalloy6059
      @tjmalloy6059 4 роки тому +5

      Good to know about complete housing change out. Would be much easier! worth 2 times the money.

  • @Zulechka83
    @Zulechka83 Рік тому +4

    Just wanted to express my gratitude for this video and the Amazon link to the right part! Three to four hours and $27 later, this stay at home mom has her dryer running again!
    Thanks again!

    • @DIYJeff
      @DIYJeff  Рік тому +3

      @Zulfiya Stokes, it’s success stories like yours that inspires me to make videos like this. If you can do a repair like this it builds confidence to do other DIY projects that can save you $$$

  • @tonyjames1953
    @tonyjames1953 4 роки тому +14

    Really nicely done! No annoying music, filler conversation, shaking camera, and just to the point. Wish everyone could do 'em like this! Thank you, DIY Jeff!

    • @DIYJeff
      @DIYJeff  4 роки тому +2

      @Anthony Behrends, this is the way I make my videos now because personally, I can't stand trying to find information about something and having to wade through multiple videos and wasting so much time just trying to find what I'm looking for. So much rambling and terrible camera work. Thanks for the shoutout and for watching the video!

    • @tonyjames1953
      @tonyjames1953 4 роки тому

      @@DIYJeff When I come in search for "how to" videos, I have little interest in people telling me where to find this or that; I know how to look through search engines and the like. I just want to see what I need to do, that's all. You understand this!

  • @lorimireles3600
    @lorimireles3600 Рік тому +2

    Thank you Jeff for your video. I am a retired woman of almost 69. My family’s dryer went out I seen other videos of other UA-camrs, but yours was the best very helpful. The only thing is I have problems getting the screws out. Some of them were too tight, but I managed to have somebody help me with that and we put the dryer back together and it works just fine the way you instructed. Thank you very much.

  • @collinsmcgheeiii8272
    @collinsmcgheeiii8272 Рік тому +2

    I am so thankful for this video. I was not only able to fix the dryer myself but save $300 dollars just for a repair man to come out and diagnose the problem with no guarantee to fix it same day.

  • @shirleyjackson9367
    @shirleyjackson9367 3 роки тому +21

    Thank you so much for making this video. So easy to follow! Even a lady with a few hand tools can replace the element thanks to You. You just saved our family a whopping. $439. 00
    I called a repair service to fix it , but the amount that they wanted to charge to replace the element could have almost bought us a new dryer. We are just an average family living check to check. People like you are inspirational and empowering at the same time. You are a wonderful teacher!

    • @DIYJeff
      @DIYJeff  3 роки тому +3

      @shirley jackson, that's awesome you were able to fix it. It's exactly why I made the video. To show that some tasks that seem too difficult are able to be done. Just take it one step at a time. Hopefully it will help build confidence for the next time you need to repair something in your house.

    • @ThatOCdude
      @ThatOCdude 2 роки тому

      Same here! No way I’m paying 400 plus to fix my dryer.

  • @celet146
    @celet146 2 роки тому +2

    I’m so glad I read the comments because I had to remove additional screws just to take the door off.. be aware it’s pretty Lentie inside - it took me abt 3hrs- I did a deep cleaning and I needed to find a small Phillips screwdriver to removed the bracket- im so happy I found this video of the exact dryer I had- other videos way to complicated- my dryer is back up & heating .. lol- definitely saved myself $300 bucks- we have covid & air drying washed clothes and not feeling well it was a $hitshow - glad my dryer working and I survived the 3hrs… Thank You again

    • @DIYJeff
      @DIYJeff  2 роки тому

      @Cele T, I’m glad you were able to get the job done.

  • @sharonwarren5115
    @sharonwarren5115 6 років тому +2

    We used this video to repair our 2 year old Samsung dryer. Ordered a heating element, thermostat and fuse kit on Amazon for $39. The video was extremely helpful. It took my husband, who has never replaced a heating element before, about 30 minutes. We looked at several videos, to get different tips and voila... saved ourselves probably $300. Invaluable info. Thank all of you UA-cam experts!!!!!

    • @DIYJeff
      @DIYJeff  6 років тому +1

      Sharon Warren , you’re welcome. I’m glad you were able to save money!!! I also like the accomplishment of completing a job myself.

  • @craigslist9176
    @craigslist9176 10 місяців тому +4

    Thank you for the video! Pretty straight forward. By far, the hardest part for me, is unscrewing and screwing back in, the two screws in the back for the mounting bracket. Holy cow.

    • @DIYJeff
      @DIYJeff  10 місяців тому +1

      Yes, those were definitely a challenge.

    • @sp1068
      @sp1068 10 місяців тому

      I don't think those back two are going back in. Pointless.

  • @terrys4247
    @terrys4247 2 роки тому +2

    thank you so much! your video helped! i bought just the heating element from your video but in the process of replacing I broke one of the components so i bought the heating assembly from your link got it installed and everything works perfect . cost me around 70 dollars but saved me around 400 i appreciate it!

    • @DIYJeff
      @DIYJeff  2 роки тому +1

      @Terry S, I'm so glad you were able to do it. I made the video to help people save money and I have had overwhelming feedback that it's done just that.

  • @angelathompson5041
    @angelathompson5041 Рік тому +3

    This was the easiest and best video to follow. Beside the 3 screws on the front of the door. All in all. Very well explained both breaking down the parts and putting back together.

    • @DIYJeff
      @DIYJeff  Рік тому +1

      Thanks, I’m glad it was helpful.

  • @Samoan_Diecast
    @Samoan_Diecast 5 років тому +3

    Thank you for sharing this. My wife was determined to buy a new dryer for 300 plus dollars. I was able to convince her to let me check the heating coil first after showing her this video. The link for the heating element was a great help! Thank you again. 300 bucks just turned into 20 buck!

    • @DIYJeff
      @DIYJeff  5 років тому +2

      xB Marley , that’s awesome! I’m glad it was able to save you $280!

  • @donkeysrevenge3512
    @donkeysrevenge3512 4 роки тому +6

    Holy cow! I did it. Thank you so much! The repairman quoted me almost $500 to fix this. I fixed it for $35 with your help. You rock!

    • @DIYJeff
      @DIYJeff  4 роки тому +2

      DonkeysRevenge, you're welcome. I'm glad you were able to do it yourself!

  • @dwillslady69
    @dwillslady69 Рік тому +5

    Thank you so much for a great video! Me and my 14 yr old son was able to do this alone. One thing I wanted to mention, there is a screw connecting the door to the drum that needs to come out in order to remove the door that wasn't mentioned. ALSO pay attention to the connectors before you remove them, you mentioned this after the step and we took them out and had to guess which way to put them back. Thank God it worked!!

    • @michaelbaughman8524
      @michaelbaughman8524 Рік тому

      Yes the remark at 8:53 "When you remove the connectors originally, be sure to take note as to which connectors go to which terminals, so that you reinstall them correctly" should really be at 4:33 before you remove the connectors! When you go to reattach them it's too late, and it's hard to tell from the video how they go. I took some pictures before removing so I think I got them back on right, but my videography was poor and I'm slightly doubtful.

    • @andrulanelson9847
      @andrulanelson9847 6 місяців тому

      I'm not finding the extra screw in order to take the door off:(

  • @jonmitchell7626
    @jonmitchell7626 8 днів тому

    Jeff thank you so much. Saved me hundreds and only took 2 hours and a couple of mere flesh wounds.

  • @JH-du9pg
    @JH-du9pg Рік тому

    This was my first attempt at fixing a dryer. With the help of this video and another about the same model, I am proud to say I was able to get the job done.
    One tip for anyone attempting this, there is no need to remove the brackets from the back of the machine. Those brackets serve as a hinge. The clips holding the top in place can be pried loose from the front with a flat head screwdriver. The top lifts up to reveal the screws needing to be removed.
    Thank you for making this video, it was a huge help.

  • @davingreenly8971
    @davingreenly8971 4 роки тому +1

    I just completed this fix. It took me 1.5 hours because I was cleaning as I went. The video was a huge help and the hints were valuable. I replaced the entire heating unit. Cost me $150 with shipping. No joke, the three screws in the door are a must in order to get the front face off. I discovered the last clown who worked on the dryer when the Mother Board died lost one of the brackets on the back. I was OCD and put all screws is small Dixie cups and labeled them based on where they came from. You probably don't need to do this, but.... The rear screws on the back bracket that holds the heating element took me the longest. I am a big person and it is a tight space. The issue with my unit was the heating element. It had a break in it. I took several photos of the wiring - it helped tremendously. The flathead screw driver - wiggle method worked great. I used a small precision screwdriver and once you move the clip off of the post the width of the screwdriver, they come right off. Thank you Jeff for paving the way. Momma's happy, so we are all happy...

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @Davin Greenly, I'm glad you were able to get it fixed!

  • @cherylwilliams7280
    @cherylwilliams7280 3 роки тому +2

    I couldn't have done this without your video! Thank you very much. Instead of an hour, it took me 4 hours. The heater thing gave me problems. So I asked my neighbor to help me with that. I am Woman! Hear me Roar! lol

    • @DIYJeff
      @DIYJeff  3 роки тому +1

      @Cheryl Williams, but you did it and should feel proud of that.

  • @407890
    @407890 3 роки тому +2

    Fixed the dryer myself thanks to this video super easy fix. Bought parts from the links provided and replaced all three all at one for under $30. The back screws you can't see are lots of fun to get to. Make sure you have a stubby Phillips screw driver for this repair.

    • @DIYJeff
      @DIYJeff  3 роки тому +2

      This is why I made the video. To help all of us save $$$ in repair bills or filling landfills by throwing away something that can be fixed.

    • @407890
      @407890 3 роки тому +1

      @@DIYJeff THANKS 👍

  • @kkproductions2097
    @kkproductions2097 4 роки тому +7

    You might want to let your viewers know that by just removing the heating element housing by itself will leave the lint that has accumulated inside the dryer. Which can then lead to a greater problem. One that could potentially be a life or death situation. It's a smarter idea to go ahead and remove the front wall as well as the drum. Once removed it will be a whole lot easier to remove all of the lint that has built up over the years. Therefore leaving less chance of a fire.
    Otherwise a very nice and informative (how-to video). Thank you for the effort that was put into making it.

    • @DIYJeff
      @DIYJeff  4 роки тому +4

      K&k productions, yes, that's true. I can't go back and edit the video now, but if viewers read through the comments they'll see your comment. I appreciate you making the suggestion.

  • @gunnyoorah1846
    @gunnyoorah1846 4 місяці тому +2

    Jeff this instruction vedieo is great. I and my wife did the replacement within 2.456 hours, hehehee. But it now works. You saved us a lot of money by not hiring a mechanic. We will be watching out for more of your video's.

  • @jackturner2931
    @jackturner2931 2 місяці тому +1

    Great video! Just echoing what so many have posted. FWIW, I unscrewed the green ground wire near the front during disassembly. This allowed me to more easily remove the wires connected to the element. I was able to pull element housing all the way out, and then disconnect wires.

  • @angelaswanson6029
    @angelaswanson6029 5 років тому +6

    As a woman who has never really done anything like this before, I found this video and the comment below about the 3 front screws extremely helpful. My daughter and I tackled this heating element replacement together. However, it does require patience and determination to get the blind screws off on the back of the bracket that you have to do by feel. I ordered the replacement kit on Amazon $32.00 (includes heat element, fuse and thermostat and a couple other thermostats).Hooked it all back up and is running/heating again. The replacement parts are aftermarket parts and not Samsung name brand, hopefully they will last a while. I also did not put in 3 of the screws. One of them from the back of the bracket where you have to do it by feel and the other 2 on the cover to the heating element. Since the parts are aftermarket some of the holes did not line up correctly, but I made sure it's placement was secured by all the other screws holding it together.

    • @DIYJeff
      @DIYJeff  5 років тому +1

      Angela Swanson, thanks for sharing your experience with everyone. I'm glad you were able to do the repair with the video. When I replaced my heating element all the screws all lined up so I guess it depends on the aftermarket manufacturer. Great job!

  • @joebrunobass
    @joebrunobass 2 роки тому +1

    This video was awesome! The three screws were the only hiccup I encountered. Can’t believe I did it with my wife and daughter assisting!

    • @DIYJeff
      @DIYJeff  2 роки тому +1

      @Joe Bruno, that’s awesome!

  • @chadhunter8757
    @chadhunter8757 Рік тому +1

    Omg the replacement heater went bad yesterday. Well I got 3 yrs out of it lol. I'm rewatching the video again for another time. Thanks again!

  • @jyeaman2012
    @jyeaman2012 3 роки тому +2

    Thank you Jeff for the video! I was about to drop $300 on another dryer. The heating element cost me $30 brand new. Dryer works great and i'm fortunate to have the exact same dryer. To add to the video and previous comments, there are 2 screws behind the door that needs to be taken out. Thanks again!!

    • @DIYJeff
      @DIYJeff  3 роки тому +2

      @Spending Maple, you’re welcome. I’m glad you were able to fix it.

  • @enrique6943
    @enrique6943 5 років тому +1

    Saved over $500 by watching your video. I was going to get this dryer, not anymore. I'll fix my old dryer instead. Thanks Jeff
    And screw the haters that gave you thumbs down they probably do this for a living and RIP people off charging hundreds of dollars for a basic DIY level stuff.

    • @DIYJeff
      @DIYJeff  5 років тому +1

      Enri Que, that's awesome! Thanks for sharing your savings.

  • @christopherclark5504
    @christopherclark5504 3 роки тому +4

    Jeff you just saved my life buddy! Awesome video still helping folks after 2 yrs!! Go buddy. Keep em coming

    • @DIYJeff
      @DIYJeff  3 роки тому +1

      @Christopher Clark, thanks for the comment. Glad it was helpful for you.

  • @patoconnor9600
    @patoconnor9600 Рік тому +1

    Awesome vid. I have a different model Samsung (DV42H5400EW/A3) but by following your vid I was able to swap out the heating element tonight and my clothes are now drying once again. Thanks much!

    • @DIYJeff
      @DIYJeff  Рік тому +1

      @Pat O'Conner, you're welcome. I'm glad you were able to do the job yourself.

  • @Hammersmithblues
    @Hammersmithblues 5 років тому +4

    Thanks, Jeff! Your video saved me some money by allowing me to do my own repairs. My dryer had an extra screw retaining the heating coil assembly to the bracket. I would also suggest that anyone wanting to do this to watch the video first and to use your camera to photograph the wiring.

    • @DIYJeff
      @DIYJeff  5 років тому +1

      Tim, Kilgore, thanks for the comment and the tip!

  • @tnwncsu2010
    @tnwncsu2010 3 роки тому +1

    A LIFESAVER!!!! Saved us hundreds of dollars!!!! THANK YOU SO MUCH!!!!!! Only issue is now it squeals a little when it's turned on... Any suggestions?

    • @DIYJeff
      @DIYJeff  3 роки тому +1

      @tnwncsu2010, a squealing sound is most likely the belt. It may be loose and need tightened or replaced altogether.

  • @mobot9375
    @mobot9375 2 роки тому +1

    This was the most helpful videos we watched during our repair. We found it was easier to remove the back panel connection to be able to access the two screws behind the heating element stand. The part that took us the longest was finding a short stubby screwdriver. 2 hours total including the scavenger hunt. Thank you for the video.

    • @DIYJeff
      @DIYJeff  2 роки тому +1

      @Mo Bot, I’m glad you were able to tackle the job!

  • @johnparker4529
    @johnparker4529 Рік тому +1

    THANK YOU, JEFF I was relieved to find your video is the exact model of dryer as mine. Your guidance made this job much easier than I anticipated it would be. Your instructions are easy to follow. FYI I could not get the two screws into the back of the supporting bracket as my hands are too big. I’ll see how it goes. I feel confident that if I have to take it apart again to replace those screws it won’t be a problem thanks to you. I just have to find someone with small hands😊

    • @DIYJeff
      @DIYJeff  Рік тому +1

      I’m glad the video was helpful for you!

  • @Pewee39
    @Pewee39 4 роки тому +2

    Great video I bought the part for $17 on Amazon followed the instructions and saved myself a lot of money. Thank you

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @Chris Merrell, that's awesome! I'm glad you were able to get it fixed.

  • @denniskelly1251
    @denniskelly1251 3 роки тому +4

    Well I just finished. After a few bumps, I finally got the front door off, and it was due to a few extra screws I didn’t take out. The rest of the job went very smooth with no problems. Be careful of the metal on the heating core cover because it is really sharp and could cut you pretty bad. I have a few cuts that bled for a bit. Thanks for the video

  • @theunknowngamer5477
    @theunknowngamer5477 4 роки тому +1

    This is the gift that keeps on giving...some sarcasm included.
    Perfect video about how to repair this...thing, too many exist with this faulty feature.
    I have helped six people and recommended this video to others, advice goes to
    buying some other machine....parts are affordable WITH some shopping around.

    • @DIYJeff
      @DIYJeff  4 роки тому +2

      @The Unknown Gamer, dryer heating elements are one of the most common parts to fail because there are many factors that could cause it. Blown fuse, faulty thermostat, or clogged vent.

  • @jeffellison8996
    @jeffellison8996 5 років тому +4

    Thanks Jeff. Great tutorial! One thing that folks should be aware of. As with any new heating element, you will probably notice a slight burning smell the first time you start the dryer back up. This should normally go away after the first few minutes of use.

    • @DIYJeff
      @DIYJeff  5 років тому +1

      Jeff Ellison, thanks for posting your comment. Great insight and true!

    • @lynnice604
      @lynnice604 2 роки тому

      @@DIYJeff I need the connector pattern! I forgot the order

  • @elliot8913
    @elliot8913 Рік тому +2

    I watched a bunch of videos on this repair. Yours was the best and the one that I used as my guide while I fixed my Samsung dryer. Thank you for posting this video!

  • @cflan9726
    @cflan9726 2 роки тому +2

    Great video, bought the kit linked off Amazon in the description. Saved me hundreds of dollars for a simple fix. My only recommendation to people is pay attention to the wiring cause it can get tricky

    • @DocSonix
      @DocSonix 7 місяців тому

      Yeah I busted one of the spade connectors...the really difficult-to-find 5/16" inch one... -_-

  • @chrism6878
    @chrism6878 3 роки тому +3

    $20 fix on my 5 year old dryer thanks to this video. Thank you Jeff!!

    • @DIYJeff
      @DIYJeff  3 роки тому +1

      @Chris M, you're welcome!

  • @gail6904
    @gail6904 3 роки тому +1

    HEY JEFF..YES IT WORKS FINE NOW..thank u sooooooooooo much for your video..any woman can do this!! Great instructions..works like a charm..ty for everything and sharing such great learning videos..it helps so many of us in need!!! SAMSUNG DRYING NOW!! :) :) :)

    • @DIYJeff
      @DIYJeff  3 роки тому +1

      @gail, you're welcome!

  • @heatherhillage6286
    @heatherhillage6286 Рік тому +1

    Thank you for this tutorial!! My daughter and I were able to replace the entire assembly thanks to your guidance! I am curious to know how long I should expect the burning smell. I see in the previous comments that it is to be expected, but I need reassurance that I won't burn the house down, lol!

    • @DIYJeff
      @DIYJeff  Рік тому +1

      @Heather Hillage, it shouldn't last much longer than when you turn the heat on in your house after the summer and it hasn't been used in a long time. If it persists more than 2-3 minutes then there may be a different problem.

  • @cristianmartinez3660
    @cristianmartinez3660 4 роки тому +1

    You do not know how grateful I am right now!
    Thank you so much for saving me hundreds of dollars.

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      Cristian Martinez , you’re welcome. Have you done the repair yet?

    • @cristianmartinez3660
      @cristianmartinez3660 4 роки тому

      @@DIYJeff Yes I have. Took me probably an hour or so to complete. Works like new. Thank you again.

  • @ShenPaschal30
    @ShenPaschal30 2 роки тому +1

    Thanks Jeff I fixed my dryer and it's hotter than ever . I truly appreciate the thumbnail for the 6 wires. It was very easy the heating element had a break I replaced all components so glad I did. 😊

    • @DIYJeff
      @DIYJeff  2 роки тому +2

      @Shen Paschal, that is awesome! And you did it! think of all the other things you'll be able to fix now from the confidence of replacing your own heating element. I know most men won't even tackle the project.

  • @chetmaxwell3896
    @chetmaxwell3896 10 місяців тому +1

    Thank you so much sir. My biggest worry was the wires going in the right place on the element & thermostat but I turned it on & it seems to be heating now. This video saved me a ton of money on a repair man & or new dryer. And the element was only $26 & change on Amazon & that includes shipping. Again thank you so much this video was a God send for a poor check to check family like mine

    • @DIYJeff
      @DIYJeff  10 місяців тому +1

      @chetmaxwell3896, that’s so good to hear. I’m glad you found the video helpful and saved some$$$.

  • @ryanssherman
    @ryanssherman 4 роки тому +3

    Great video. I replaced the element, and while at it, did the thermostat and thermo fuse, since they were right there and only $10 of Amazon.
    Be careful on the sheet metal inside the dryer, it's sharp.

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @ryan sherman, you're right about the sheet metal!

    • @EarthShift-tr5ur
      @EarthShift-tr5ur 4 роки тому

      Lol - yes my hubby cut his hand... and he’s a welder 🙄 works with sheet metal all the time...he said the edges are not finished properly...

  • @deas1anguy
    @deas1anguy 6 місяців тому +1

    Thank you sir for your video guide! Even though, you miss those 3 screws part which had me struggling for like 10 mins then I realized that were screws holding them back lol. I should had read the comments earlier 😅

  • @lasonya22000
    @lasonya22000 8 місяців тому +1

    Wowww 3 years have past and I’m back again about to replace it again. Great video! Very helpful!!!

    • @DIYJeff
      @DIYJeff  7 місяців тому +1

      Im sorry to hear the element didn’t last. I’d suggest replacing the thermostat too if you haven’t.

    • @lasonya22000
      @lasonya22000 7 місяців тому

      @@DIYJeff well I replaced it before getting this about the thermostat. I’ll be back to this page the next time I replaced the element. Very grateful for this video!

  • @paulwood9937
    @paulwood9937 Рік тому

    Big Thanks Jeff, 40 bucks about an hrs work, saved me a lot of money, had to work out the 3 screws at the front but all good great video.

  • @skyeskye1476
    @skyeskye1476 4 роки тому +2

    This video was amazing and helped me get my dryer fixed. It turned out the heating element was bad, but I don't know if it was caused by the thermostat or not. So, after reading the comments, I just replaced that while I was there. Thank you!

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      Skye Skye, yes, replacing the thermostat while you're in there is a good idea since you already have it apart and it doesn't require any additional labor. Plus the part is cheap!

    • @MrWarblot
      @MrWarblot 4 роки тому

      This helped me a lot

  • @09218205
    @09218205 3 роки тому +1

    very good video and if I only miss the part where I pointed out that I had to remove the 3 screws from the front panel, it almost destroyed the dryer, the best thing is that my wife was with me and she was helping me fold it 😁😁

  • @ciercee
    @ciercee 3 роки тому +1

    Followed your guide and it works like a charm now. I went ahead and ordered the other two parts that are attached to the heating element though and replaced it all.

  • @Jeff_Seely
    @Jeff_Seely 2 роки тому +1

    Thanks Jeff and I am Jeff also😀! Yup , you have the easiest way to do this task. The rearward repair is a rearward pain! I found your procedure to be the painless route and thanks for the link. Hint: If you have a large family with many cycles to do daily, look for another dryer. This one is not that "maintenance-free". Hint #2: if youve bought one of these and are in for the long haul, you can buy these in packs of three.

  • @jamesonconde6624
    @jamesonconde6624 4 роки тому +1

    Thank you so much for your video. I was able to order the heating element for my samsung dryer. With your video I was able to disassemble, clean, and reassemble my dryer with little effort. Probably would have spent close to what I paid for the dryer if I had someone come to repair it. Thanks again hope I can pay it forward.

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @Jameson Conde, you're welcome. I'm glad you were able to get it fixed!

  • @MrTenofTen
    @MrTenofTen Рік тому +2

    Great video. I have had to replace this part twice and both times this video was my guide. Thank you kindly.

  • @brittanymcmahan1400
    @brittanymcmahan1400 4 роки тому +2

    Thank you for the great video and instructions. My husband and I replaced it today and it took about an hour and works fine now. Thanks again for your time making this video. Saved us so much $$$

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @Brittany McMahan, you're welcome! I'm glad you were able to get it fixed.

  • @Medicranger
    @Medicranger 3 роки тому +1

    Excellent video. Please remove the front 3 screws located inside the door and drum area. See other comments for more details. Once you have those off the front section can be removed. Other than that. Perfect video. Rock on and thank you for the links saved a lot of money. Cheers

  • @bluefrog85
    @bluefrog85 Рік тому +1

    Had to unscrew some screws for door to come off but otherwise this was amazing! Thanks for the help, changed it out and it heats again! My element was black but it wasnt broken that I could see visually. Changed out and solved my issue!

    • @DIYJeff
      @DIYJeff  Рік тому +1

      Sorry about the screws…but glad you were able to get it fixed!

  • @davemac5157
    @davemac5157 4 роки тому +3

    Nice work. Everything went as you explained. My coil was burnt out in the same spot. You weren't kidding about those 6 wire connectors. They were tough. A word of caution to my fellow repair novices before you start. There are some sharp edges underneath. Prepare for it to get bloody.

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @Dave Mac, glad you were able to get your dryer up an running again!

  • @mustangpapi76
    @mustangpapi76 4 роки тому +1

    Thank you so much sir. This video saved me a bunch of money. $23 for the kit. In and out in less than 1 hour. Lucky I read the comments about the 3 front screws. I would have broken something. Lol. Keep up doing theses awesome videos. A+

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @Hector Perez, awesome! Glad you were able to get it fixed!

  • @Wowzersdude-k5c
    @Wowzersdude-k5c 10 місяців тому +2

    Thank you for the video. I was able to change my dryer element on my own and saved a couple hundred bucks.

    • @DIYJeff
      @DIYJeff  10 місяців тому +1

      @JohnSmith-ys4nl, you’re welcome. I love it when people can save money and feel a sense of accomplishment when they are able to do a project they’ve never done before.

  • @neillsouthwick8444
    @neillsouthwick8444 3 роки тому +1

    Wow, what a fantastic video. I just happen to have this exact dryer. Picked it up for FREE because the owners just wanted it gone. I sure prefer Whirlpool dryers to this Samsung. Coil replacement is much easier on them. I would have figured it out but your video will make the task a lot easier. Cheers, Neill

    • @DIYJeff
      @DIYJeff  3 роки тому +1

      @Neill Southwick, glad the video was helpful.

  • @lalolalo1233
    @lalolalo1233 3 роки тому +2

    Thanks man, very helpful and yeah I did this fix and it's now working like new (happy wife). A couple of things best to just buy the whole heating element assembly (sensors, box and all), it's only $58 at amazon, believe me it will save you lots of cuts not to mention lots of time and one's back pain.

    • @DIYJeff
      @DIYJeff  3 роки тому +1

      Sometimes the thermostat goes bad which causes the heating element to blow so replacing the whole thing certainly eliminates a bad thermostat.

    • @lalolalo1233
      @lalolalo1233 3 роки тому +1

      @@DIYJeff Exactly. The assembly kit includes that too. Also, removing the drum for easy access and double check the idle pulley/belt conditions wouldn't hurt, did that to squeeze more years out of my dryer. Hey, these things aren't cheap, $700 plus vs. $70 bucks is a no brainer.

  • @muzikman789
    @muzikman789 3 роки тому +1

    Thanks this was helpful. Those 3 screws got me scratchthing my head 'til I read your note. I found it easier to remove the drum. Don't have to mess with the cumbersome bracket at all. I had to replace 2 rollers in the past so I wanted to give them a litttle grease anyways.

  • @andyunderwood8376
    @andyunderwood8376 4 роки тому +1

    I really appreciate this video. My first washer and dryer and it’s lasted almost 5 years without ANY issues. Heating element went out and I was sure it was going to be a pain to fix BUT, this video was the easiest to follow and made it a breeze to switch out. Huge Thank you!!

    • @DIYJeff
      @DIYJeff  4 роки тому

      @Andy Underwood, you're welcome
      !

    • @arcadeslum5882
      @arcadeslum5882 4 роки тому +1

      this was my exact situation as well but buyer beware, the amazon replacement element only lasted me 13 months before breaking again. I may consider replacing samsung with an american brand machine if it breaks again.

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      Arcade Slum, it’s hard to get good parts these days. Make sure your lint vent and tubing coming out the back of the unit isn’t clogged. That can blow an element as well as a faulty thermostat.

  • @tigerwolf126inf4
    @tigerwolf126inf4 Рік тому

    Thank you for showing me how to fix, I purchased element and changed it out today with your directions.

  • @krystenreid8106
    @krystenreid8106 Рік тому

    Thank you so much. This saved us hundreds of dollars and really empowered us to fix this on our own

  • @robertlester4569
    @robertlester4569 5 років тому +33

    Thank God for the comments. I wasted 10 minutes trying to pull the front off

    • @dober123
      @dober123 5 років тому +1

      Robbie Lester yeah i had to check for myself too 😂

    • @valeriehambling2032
      @valeriehambling2032 4 роки тому +1

      Thank you for this comment lol. Pure frustrations trying to pull the door off...feel stupid now

    • @codyclark9484
      @codyclark9484 4 роки тому +2

      ...only 10? Lol. I wish I had only spent 10

    • @robertlester4569
      @robertlester4569 4 роки тому +1

      Cody Clark 😂

    • @chuckydamustang698
      @chuckydamustang698 4 роки тому

      Where’s the comment to help I’m stuck right now on the front

  • @sparkyinfla
    @sparkyinfla 3 роки тому +1

    Thank you for your informative repair guide. I'm a terrible dyi guy but this video made it doable. You saved us hundreds of dollars in repairs. Thanks again!

    • @DIYJeff
      @DIYJeff  3 роки тому +2

      @sparkyinfla, you’re welcome. I’m glad it was helpful.

  • @rhoberta1
    @rhoberta1 3 роки тому +1

    Excellent video. Saved me buying a new dryer. The coils were broken just as you showed in the vid. J Burgess thanks for the tip about the screws. I tugged on the front of the dryer a few times before I remembered what you said 😀.

  • @laosboyr
    @laosboyr 2 роки тому +1

    Jeff, I would like to say thank you so much for this detailed step by step tutorial! Very much appreciated! Just sharing information, my Samsung electric dryer was model number "DVE52M7750W/A3" and this video was pretty much spot on for me and I decided to just replace the whole heating assembly for a more "plug and play" type installation, the Samsung part number I ordered was "DC93-00154A". I confirmed this part number from the "samsungparts" manufacturers parts catalog website, hope this helps someone and thanks so much again Jeff!

  • @jayl8433
    @jayl8433 3 роки тому +1

    This is the best video for this compared to others I watched. This saved me about 45 minutes or more. Thank you!

  • @clintswain8571
    @clintswain8571 2 роки тому +1

    Thank you so much for this video! I watched it a few times before attempting to fix my mother in laws dryer. I’m not a handyman and most projects end up in lots of frustration. Your video was spot on and my wife even commented “you seem to know exactly what you’re doing!” Thanks for helping me make this quick and painless.

    • @DIYJeff
      @DIYJeff  2 роки тому +2

      @Clint Swain, that's a great success story! I'm glad the video was helpful. Most tasks can be made easier by just having clear concise instructions.

  • @crifix.
    @crifix. 4 роки тому +5

    i was going to buy this dryers, but after watching this, I changed my mind...thanks

    • @theunknowngamer5477
      @theunknowngamer5477 4 роки тому +2

      Is there a better dryer...still working on this one, two problems in the last month.
      If not for this video, the loan shark and a dryer a week later would be entertaining.

    • @laynelandon3701
      @laynelandon3701 4 роки тому +2

      Yes avoid this one at all cost this is the third damn time I’m having to tear it apart and work on it. Ridiculous lol thought Samsung was better built than this

    • @neillsouthwick8444
      @neillsouthwick8444 3 роки тому +1

      @@laynelandon3701 . Samsung appliances suck. As one guy said, "Samsung should keep to making phones".

  • @ClintBoland
    @ClintBoland Рік тому +1

    Thanks so much, Jeff. You guided me through repairing my Samsung dryer. Great video. God bless!

    • @DIYJeff
      @DIYJeff  Рік тому +2

      @ClintBoland, that’s great to hear! I’m glad the video was helpful.

  • @jamesgreene5168
    @jamesgreene5168 4 роки тому +1

    Me and my wife just changed the heat element in our Samsung dryer. Thanks for the video it was very helpful.

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @Kevin Greene, you're welcome. I'm glad you were able to get it fixed.

  • @ImaHatchet
    @ImaHatchet 2 роки тому +1

    great tutorial. it worked for a little but i think the top and bottom wires on the element found a way to touch and blew the element again. but the weird thing is the fuse and thermostat is fine??? maybe i got a faulty element but I am not sure.

    • @DIYJeff
      @DIYJeff  2 роки тому +1

      @Auger Studios, it’s possible you had a weak element, but it’s also possible the thermostat isn’t working properly even though it may still be not fried. Or worse case, there could be an issue with the motherboard. But the most likely problem would be a defective new element.

  • @davewilliamson8009
    @davewilliamson8009 5 років тому +1

    Nice work, and thank you. I’m not the handyman type, but you gave clear instructions and my dryer is now working again. Great success.

    • @DIYJeff
      @DIYJeff  5 років тому +1

      Dave Williamson, I'm glad you were able to get the job done yourself. Not only is it a way to save money but a great feeling of accomplishment as well.

  • @colleensine7571
    @colleensine7571 5 років тому +1

    Wow - this was so helpful! We aren't big DIY-ers, but took a chance on the $20 element part (thanks for the link!) and an hour or two on a Sunday afternoon, and it worked like a charm (after reading about the missing part - thanks for updating)! If ever in need of maintenance or repairs again, we'll check with you first! Thanks!!

    • @DIYJeff
      @DIYJeff  5 років тому +1

      Colleen Sine, that's great news! Hopefully it will give you the confidence to take on another challenge in the future. UA-cam has a wealth of DIY knowledge, all at your fingertips!

  • @nrgyzr2012
    @nrgyzr2012 5 років тому +1

    Thank God someone made a video about MY EXACT dryer!! But we went through all this trouble, tear it down, put it back together, swapping out the element, and that was not the problem 😭😭😭. But at least now I know how to do it. Thank you.

    • @DIYJeff
      @DIYJeff  5 років тому +1

      Duane Watson , did you find out what is wrong with it?

    • @nrgyzr2012
      @nrgyzr2012 5 років тому +1

      @@DIYJeff Yes I did. I'm ashamed to admit this, but I had 2 wires backwards. Whatever the component is on the rear of the element housing? I had those two wires on that component reversed. Put them on right, and now the dryer works like it's brand new! Thank you for uploading, and thank you for asking!

    • @DIYJeff
      @DIYJeff  5 років тому +2

      Duane Watson , nothing to be ashamed about. What’s great is that you were able to figure it out and now it’s fixed! Each successful DIY project you do grows confidence and ability to take on other projects you’ve never done.

  • @joshhegwood5999
    @joshhegwood5999 2 роки тому +1

    This video saved us over $400. Tech came and quoted $400 with the replacement part. I understand it’s not the easiest repair but that seems a little steep to me 🤷🏼‍♂️

    • @DIYJeff
      @DIYJeff  2 роки тому +2

      @Josh Hegwood, I’m glad you were able to follow the steps in the video and save a considerable amount of money.

  • @joneschberger1290
    @joneschberger1290 4 роки тому +2

    Great video...I was able to complete the replacement of the heating element just as you showed in the video. Those 2 screws on the back of the lower bracket were a little tough to get loosened at first but was able to get it done. Now everything is reconnected and the dryer is working as expected.

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @Jon Eschberger, awesome! Yes, those screws on the back are definitely a bear to get out but doable with patience.

    • @dibsolives
      @dibsolives 2 роки тому

      I got lucky mine has tabs instead of screws.
      I did remove the screw at the back of the dryer where the lint duct is and it gives you more space to reach the screws if yours has them.

  • @trasinater
    @trasinater 3 роки тому +1

    Thanks! Very helpful. I wish I had read about the missing step before starting though. I would also suggest wearing some good quality thin work glove when reaching into the dryer as many of the edges are very sharp. The wiring harness is actually a simple series circuit, but I suggest taking a couple of pictures to refer back to if you are electrically challenged.

    • @cbase85
      @cbase85 3 роки тому

      I replaced the fuse and thermostat since it came in the bundle i purchased. I noted how the old thermo and fuse were wired, but have no idea if there are certain prongs the wires should be connected to (i could have installed the thermostat upside down for all i know). I wired it all back the same it was when i took it out and it works, but buzzes. Is this normal?

    • @chrism6878
      @chrism6878 3 роки тому

      Agree on the work gloves comment. I took a few chunks out of my hand pulling the electric cord on the door apart. Then I cut a bunch of little holes in my other hand trying to force the heating element container together.

  • @miggybe4577
    @miggybe4577 2 роки тому +1

    Thank you so much for your video. It helped me back in October 2021. I had to replace it. But it went out again 😭😭😭 not heating up anymore. I'll have to buy another

    • @DIYJeff
      @DIYJeff  2 роки тому +1

      @Miggy Be, it's possible it went out again because of a lint clog at the back of your dryer or in the vent going to the outside of the house. If the dryer cannot vent properly it causes the element to overheat.

    • @mikemunguia6392
      @mikemunguia6392 2 роки тому

      @@DIYJeff Thank you for the response. I will need to check it out. I'll be a pro by the number of times I replaced the thing. lol. This time for the fix, I was able to ensure there were no clogs in the dryer. But I will check again to make sure. Because the 'check filter' light does flash but filter seems okay to me. Have a good day.

  • @drumbyte
    @drumbyte Рік тому +1

    Excellent video! It is not necessary to take off the screws in the back on this model. Simply pry up the lid from the front in one swift movement while holding down the lower part of the dryer with your foot. Also, if you take off the front bulkhead (4 screws), you don't need to take off the bottom bracket that holds up the heating element. I used a cheap Hook & Pick Set to line up all the holes on the heater assembly. It's a good idea to take apart as much as you can in order to vacuum out all of the lint. Use a multimeter to test the sensors, no resistance/continuity = good.

  • @daviddoolittle1
    @daviddoolittle1 Рік тому +1

    Thank You for the Video. Just did mine in an hour thanks to you. 👍😎

  • @Plstryiceforme
    @Plstryiceforme Рік тому +1

    Thanks for the video bro! Me and my daughter just fixed our dryer 👍🏿

    • @DIYJeff
      @DIYJeff  Рік тому +1

      You’re welcome

  • @GoBlueGreg
    @GoBlueGreg 11 місяців тому +1

    Great video! I used your great instructions to replace the heating element in this exact dryer. Thanks so much!

    • @DIYJeff
      @DIYJeff  11 місяців тому +2

      @GoBlueGreg, that’s awesome! I’m glad the video was helpful.

  • @paradisepaintingandpressur9563
    @paradisepaintingandpressur9563 5 років тому +2

    Thanks a lot. This video saved me 200$. The part was 30$ it took me a couple hours because I’m a rookie lol. But the dryer is running back to normal thanks again

    • @DIYJeff
      @DIYJeff  5 років тому +2

      Harry Edmonds, I'm glad the video was helpful for you and that it's back up and running? If it happens again, you'll be able to change it out in no time at all?

    • @paradisepaintingandpressur9563
      @paradisepaintingandpressur9563 5 років тому +1

      DIY Jeff ya buddy. Part of the problem that slowed me down is I watched a couple other videos and took off parts I didn’t need to take off. I was happy when I found your video. All the other ones were saying to take the drum out.

  • @BlissfullWulf
    @BlissfullWulf 3 роки тому

    Just ordered a new dryer today and was checking some YT videos to see how hard it was to work on and yeesh, this is so much more hassle than the dryer that I'm replacing, with that one you just had to take off the back panel and you had access to everything.

  • @milankoprivica5779
    @milankoprivica5779 2 роки тому +1

    Thanks for the instructional video it helped
    I was able to follow and replace the entire heating element I found for dirt cheap. Although getting back in and lining it up with the rear port hole was a hassle. All of it was a bit of a hassle but glad for your video to guide me through. Thanks

    • @DIYJeff
      @DIYJeff  2 роки тому +1

      @Milan Koprivica, you’re welcome. I’m glad you were able to get the job done.

  • @kellykaren2630
    @kellykaren2630 5 місяців тому

    Thank you for your teaching! But we follow the video and change to the brand new heating stuff, and we put the door and follow all the instruction, but when we turn on the power it turn off by itself like in 5 seconds, do you know the why it turn off the power?

  • @matthusted9451
    @matthusted9451 3 роки тому

    I just did the same thing in this exact dryer. My only comment, you can remove the entire element without removing all the wires from each connection point. As stated, they are on there tight. Instead of running the risk of damaging anything, simply remove the sensors via 2 philips screws each once you pull the heat element housing out. You’ll need to unscrew the ground wire just to have a little more wiggle room. Way easier and less likely to damage anything or reinstall the wires incorrectly. Cheers.

  • @ZhmiKnopa
    @ZhmiKnopa 8 місяців тому +1

    The rear mounting brackets are hinges; lift up the front of the top panel and they will fold back to support the lid. Better to rest the lid against a wall. Some front panels have pressure clips on top, push them in to release it and tilt it forward. If no clips, remove the 3 rear screws on the top edge and the 3 lower screws begins the door attaching it to the lint duct.

  • @mrvictorhelio
    @mrvictorhelio 4 роки тому +1

    Really good movie, besides the three screws from the front, the whole video is very well done and self explanatory, thank you so much !!! helped me a lot.

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @Helio Queiroz, thanks for the compliment. And sorry about the 3 screws not being included in the video.

  • @sheisel1
    @sheisel1 4 роки тому +2

    I was able to fix my own dryer because of this video!!! Thank you!!

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @sheisel1, you're welcome. I'm glad you were able to get it working again.

  • @messiahsoldier
    @messiahsoldier 3 роки тому +1

    Thanks for this, mine was a bit different for it had 3 extra screws to remove from the front but other than that I followed this to replace the whole heating set, thank you very much.

  • @Sapperlite
    @Sapperlite 4 роки тому +1

    You sir, have saved me a nice chunk of change. My heating element coil was broken exactly as you described. Thank you very much!

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      @Joshua Quillin, you're welcome. I'm glad the video was helpful.

  • @TheRealQueenG2024
    @TheRealQueenG2024 6 років тому +1

    Just installed the element and dryer is working now! Thank you sooo much! I have the same dryer but had three extra screws than in your video and then one extra on the bottom bracket below element. But it was easy going thru your step by step video!! Thank you so much!!

    • @DIYJeff
      @DIYJeff  5 років тому +2

      envirobug, others have shared that they also had 3 screws that I missed. I apologize. I must have somehow missed videoing it. I'm glad you were able to get the dryer working though.

    • @alexanderlong2135
      @alexanderlong2135 5 років тому +1

      Was your heater coil broken?

    • @TheRealQueenG2024
      @TheRealQueenG2024 5 років тому +1

      @@alexanderlong2135 yes, when I took the original part out I saw a tiny place where the coil wire was broken (same idea as when the filament of a lightbulb is broken and is considered blown).

    • @DIYJeff
      @DIYJeff  5 років тому +1

      envirobug , which is just like what happened to the one in my video. I’m finding it’s a common problem in Samsung dryers.

    • @TheRealQueenG2024
      @TheRealQueenG2024 5 років тому +1

      @@DIYJeff When I took mine out, I noticed tiny bits of lint in the area, not much but enough to make me think that lint may have flew by and touched the coil while it was hot and made it hotter in that spot and it burned and broke the coil. I'm no engineer or mechanic so that may not even be possible, but if it is, maybe it's a tiny design flaw that could be fixed to where there is no way lint could get inside the housing. I'm making sure now I clean the lint out really well after each use just in case.

  • @dougpeters1625
    @dougpeters1625 4 роки тому +1

    Jeff this is an absolutely standing video for this repair. Thank you.

    • @DIYJeff
      @DIYJeff  4 роки тому +1

      doug peters, glad you found it useful!