3 Steps To Pulling Out A Dent On A Car
Вставка
- Опубліковано 12 тра 2024
- See the 3 Steps To Pulling Out a Dent on a Car
www.exceldentremoval.com
I will show you the 3 Steps Used To Pulling Out a Large Dent on a Car Fender
This damage that dented the fender was either caused by someone backing into the vehicle or hitting the side on the car with a bumper.
This type of dent is complex and will need several steps to properly repair with paintless dent removal.
1⃣ The first step used to pull out this dent is with the use of a cold glue.
This pulling method uses a slide hammer and a sticky cold glue to pull out a large amount of the damage.
2⃣ The second step used to fix this dent is by using PDR tools to apply leverage and pressure to the back of the panel. This process will push out the dent to bring out some of the damaged area.
3⃣ The third step used to repair this dented fender is with hammers, knockdowns , and blending the metal to push down and move the crowns back into the dented area.
All of these 3 Steps are repeated multiple times until the damaged panel is restored back to its pre-damaged condition.
*****
Subscribe To My Paintless Dent Removal Channel:
goo.gl/ZVlsrz
*****
------------------------------
Check out my list of recommended PDR tools on Amazon goo.gl/vVrHxQ
-------------------------------
************
As an Amazon Associate I earn from qualifying purchases.
Some links may be affiliate links. You won't pay more for using them, but I may receive compensation for the referral.
If you found these videos and links helpful, then I appreciate it.
**********
0:00 Pulling Out A Dent In A Damaged Fender
0:09 How Was This Dent Caused
0:20 Inspect The Damage
1:12 The 3 Steps To Pulling Out a Large Dent
1:40 Pulling Out The Dent With Cold Glue
3:09 Minnesota Paintless Dent Repair Shop
3:35 Pushing Out The Dent
5:06 Repairing The Crease
6:14 Knocking Down The Crowns
7:54 Detail Pushing and Cleanup To Finish
8:48 Recap The 3 Step Process of Paintless Dent Removal
9:28 Final Results of Fixing a Large Dent In a Car
************
*****The Paintless Dent Repair videos on the Excel Dent Removal UA-cam channel are designed to share what high-quality paintless dent removal can produce when done by a qualified PDR technician.
These PDR videos are not for teaching or training purposes or for those looking for DIY methods of dent repair. If you want to attempt these repairs, then you do so at your own risk, whether personally or by additional damage to your car.*****
Excel Dent Removal
1550 91st Ave NE STE 303
Blaine, MN 55449
Phone: (763) 780-4000
Excel Dent Removal Website:
www.exceldentremoval.com
Google Map and Directions to Excel Dent Removal:
goo.gl/NVR6AZ
Excel Dent Removal's Google Business Site:
goo.gl/ZzNSxN
=================
Subscribe:
goo.gl/ZVlsrz
UA-cam Channel:
goo.gl/EimW1A
Facebook:
/ exceldentremoval
Instagram:
/ exceldentremoval
Twitter:
/ exceldentrepair
Excel Dent Removal Blog:
www.exceldentblog.com/
=============================
Watch this Paintless Dent Repair Video Here: • 3 Steps To Pulling Out...
============================= - Авто та транспорт
These skills are amazing, i bet bodyshops hate the pdr industry 😁
It is beautiful work. Work of art. Amazing. Thank you for sharing the video with us.
Great artistry at work. Ty for this video.
GREEN GLOVES!! Come on Steven send me a pack!!
Amazing video, music, narration and a great tutorial-step by step well done
Thanks! I appreciate it Martin.
Nice work and excellent info video, Steve. Well done, mate! 👌🔝
Thanks! 👍
You are a tremendous artist
Thank you!
Awesome job🎉
Excellent repair! Nice informative Video and nice to see you back on my subscription notice. Always a pleasure👍👊
👊 Thanks! I’ve got many videos of repairs from the last year. I just need to edit them and get them released.
I hoping to have more out over the next year.
Great work. Excellent video. Thank you
👍 Thanks. This dent was more complicated than it looked.
It took quite some time to repair and get the natural shape back to the panel.
Great job Steve
Thanks!
Beautiful!! Now ill try with hot glue, pencil eraser and 1/4 mallet. Do have a terrible crease on the quarter panel.
I've been driving my car with the dent all along thinking that removing the dent will lead to the colour layer popping right out.
Your awesome! I need to do this. What would one need to do this ?
Very nice 👍 sir
Plz teach us sach a advance tecnics
Awesome presentation and repair
Thanks! I appreciate it!
Amazing work dude !!!
Thanks!
Quality all round 👍
Awesome. Thanks!! 👍
Just talked to someone about pulling a dent in a Crosstrek - this video gave a great explanation of the work involved and I feel much more comfortable working with the vendor on this project now - THANK YOU! Great work.
Glad it helped!
Amazing work!
Thanks a lot!
Exelente explicacion
Nice work 👍
Thanks 👍
Nice 👍 work
Thank You! I was surprised how well the cold glue worked pulling out the dent.
I had someone do a Florida foot on my car leaving a dmall golf ball size dent
Way to go
amazing, but how to get such tools plz
did you have to remove the fender liner or were you able to sneak behind it? Real nice work, thanks for sharing.
Yes I was able to loosen it. In a couple of the clips you can see it hanging down on the tire.
Plus all the leaves and junk that were stuck inside fell on the ground.
Will that work in 73 year old sheet metal? I believe my 51 Chevy is 16 gauge.
I have a point dent from a rock or something in my drive passenger door....got charged approx 350 dollars by Nissan. Also chipped the paint. How can I repair it myself.?
Дякую! 😀
I need this
👍
I live in florida
@Excel Dent Removal I'm in Atlanta any recommendations for a repair shop?
For the Atlanta area. I’d highly recommend @ezdentrepair Ez Auto Spa. They have a couple of locations on the east side.
If other areas are needed. Then there are a couple more paintless dent repair companies around Atlanta and Georgia.
@Excel Dent Removal okay cool I'm on the eastside as well. Thank you great video!
Thanks! I appreciate it. Let the guys at Ez Auto Spa know I said Hi!
Couldn't do that with the old car panels
Where can you get the rubber cap for the r4 tip
This was the original Pivot Tips™️ that I got off the Anson Truck a few years ago. You can still find the updated version and variety of sizes at KECO or Anson.
How much would a repair like this cost at a shop?
There are many factors that affect the cost to repair a large dent like this in a car.
While I can’t remember the exact amount from this repair from several years ago, you can find more info about the cost of paintless dent repair and also put dent cost calculator at these links :
www.exceldentremoval.com/how-much-does-paintless-dent-repair-cost/
How much is something like this?
There a several factors that effect the time needed to repair large dents and the costs involved. Every dent, location of the dent, and vehicle are different.
Some large damage like this can range from $600 - $1500. This particular repair was over $860.
can you use heat on the panel...boiling water ...air gun?
Any heat used is only to warm the panel material and paint to help make it easier to move and help prevent any damage to the paint.
Sometimes I will only need to slightly warm the panel with a heat gun. Other times I will use consistent heat during most of the repair.
YOU LOOK A BIT LOST
I have very small dent i can send you on whatsapp or email? To tell me if it can be repaired 100 %