How To Repair Small Dent in Car Door
Вставка
- Опубліковано 9 тра 2024
- How To Repair a Small Dent in a Car Door Panel
In this video, you will see how I was able to remove this small dent in the car door using paintless dent repair.
To find more information about HOW MUCH PAINTLESS DENT REPAIR COST check out this article
➡️ www.exceldentremoval.com/how-...
*****
🔴 Subscribe To My Paintless Dent Removal Channel:
goo.gl/ZVlsrz
*****
This method of PDR dent removal used special tools to push the dent out. These tools were needed to do an excellent repair because of the way the door was dented.
You will see why the glue pull method and the hot water and pulling out the dent type of repair won’t work.
When removing a dent like this one, you have to know how to properly move the metal and understand the “flow” of the metal. This is needed to achieve a flat repair.
This damage had what we call crowns or high spots at the top and sides of the dent. These hold a lot of pressure and need to be pushed back down and blended back into the dent. Once that is done, then pushing of the dent is much easier and has much better results.
You will see how by just pushing out the dent without first releasing the pressure of the crowns, limited progress was made. But, just by knocking down the high spots actually “removed” a lot of the dent without even having to push or pull it out.
After bringing down the area around the dent, I then was able to continue pushing out the dent with a couple of PDR tools. One more blunt tip with tape for a soft push and then another sharp tip tool for more fine detail pushing.
In this dent removal, I also used a few knockdowns with different tips and a few different hammers. These ranged from a softer rubber for a large and softer hit. Then moving to sharper plastic type tips for more fine detail hits.
0:00 What Methods of Dent Removal Are There
0:44 Why Glue Pulling Won't Work For This Dent
1:16 What We Use To Fix Dents Professionally
1:35 What Happens When a Car Door is Dented
2:10 Why Hot Water Trick Won't Work To Pop Out Dent
3:00 Will DIY Dent Repair Cause More Damage
3:27 How To Start This Dent Repair
4:40 Step 1 - Pushing Out The Dent
6:45 Step 2 - Knocking Down the Crowns
9:21 Partial Results Half Way Thru Repair
11:07 Step 3 - Continuing To Push Out The Dent (Fine Detail Work)
13:02 Checking the Dent From Other Angles
15:28 Finishing Details of the Professional Dent Repair
20:28 The Final Excellent Results of the Repair
21:30 See More Paintless Dent Repair Videos on This Channel
#paintlessdentrepair #doordentrepair #dentremoval #paintlessdentremoval #howto #fixdent #removedent #exceldentremoval #pulldent #removecardent #PDR
------------------------------
✅ Check out my list of recommended PDR tools on Amazon goo.gl/vVrHxQ
-------------------------------
************
As an Amazon Associate I earn from qualifying purchases.
Some links may be affiliate links. You won't pay more for using them, but I may receive compensation for the referral.
If you found these videos and links helpful, then I appreciate it.
************
*****The Paintless Dent Repair videos on the Excel Dent Removal UA-cam channel are designed to share what high-quality paintless dent removal can produce when done by a qualified PDR technician.
These PDR videos are not for teaching or training purposes or for those looking for DIY methods of dent repair. If you want to attempt these repairs, then you do so at your own risk, whether personally or by additional damage to your car.*****
Excel Dent Removal
1550 91st Ave NE STE 303
Blaine, MN 55449
Phone: (763) 780-4000
Excel Dent Removal Website:
www.exceldentremoval.com
Google Map and Directions to Excel Dent Removal:
goo.gl/NVR6AZ
Excel Dent Removal's Google Business Site:
goo.gl/ZzNSxN
=================
Subscribe:
goo.gl/ZVlsrz
UA-cam Channel:
goo.gl/EimW1A
Facebook:
/ exceldentremoval
Instagram:
/ exceldentremoval
Twitter:
/ exceldentrepair
Excel Dent Removal Blog:
www.exceldentblog.com/
=============================
Watch this Paintless Dent Repair Video Here: • How To Repair Small De...
=============================➡️ - Авто та транспорт
✅ Check Out This Video Next
ua-cam.com/video/NfRryLWuKVg/v-deo.html
Where I repair a small door ding on a car.
Dang. This guy is legit. If he were in my area I would definitely use him. I like his patience and soothing explanation. Some of the "professionals" around here lack the professionalism seen in this video.
Thanks for the awesome comment! If anyone is local to the Minneapolis area and looking for a local professional paintless dent removal company, then you can find my contact info and 100% 5 Star reviews here ➡️ excel-dent-removal.business.site
I've got 100 of these I need done on my car.
Probably could not afford it. I had a dent in my door many years ago that a buddy of mine made in my door. He said sorry and he would pay for pdr $350. Dent was less noticeable but he said it would need to be sanded and painted for perfection another $300
Wow. This wasn't just a youtube video. It was a proper lesson. Thank you for taking the time to put this up. You're saving people a lot of their hard earned money.
Glad it was helpful!
As an aspiring PDR tech & having watched hundreds of PDR how-to videos - this is fantastic. Your explanation is simple to grasp and is very much appreciated. I have paid for online courses that have not been as clear and as helpful as this video. Well done & thank you!
Thanks Dan! I appreciate the excellent comment.
One of the best PDR tutorials on here in my opinion, more please!
Thanks!
Great to see a real craftsman at work, real attention to detail and no "F" bombs which seems to be common nowadays ! This was a pleasure to watch and see what's involved in achieving perfection, well done Mr.
Appreciate the great review. 👍
They are just words.
What a perfectionist. A true crafstman for sure right here. Thank you so much for showing us all your work. From the general community, we can only dream of being so good but we know it comes from years of hard work.
Thank you very much!
Hope you are paid well....You deserve it!
Wow! You make it look so easy!
Amazing patience for a top quality dent removal. Well done and thanks for explaining the process in detail. Right man for the job for high end vehicles.
Thank You!!
Incredibly beneficial....look onward to coming back.
I just love it,, how people that now what they are doing say ''thank you for watching''. No sir thank you for taking the time for doing a video like this.
Thank you again and best wishes.
So nice of you! Thanks for the excellent comment!
You giving away your profession’s secrets is like Rembrandt or Picasso doing a UA-cam vid and giving away their painting secrets. Although a picture may be worth a thousand words, knowledge, talent, skill and experience is key. Therefore, you won’t be putting anyone out of business in your profession but quite the opposite as people will realize the above qualifiers are needed.
I actually dinged my door on purpose so I could repair it using your video. Sir! It WORKED! Thank You! Thank You! Thank You!
WOW! I don’t know if I’d purposely dent my own car just to fix it. But I’m glad it worked out for you. 👍
Thank you for the great detailed video!
Great production quality video! No loud music which I really appreciate. Graphic arrows are also great. Nice job!
Thanks!! I appreciate the feedback.
Definitely the best, most complete video I’ve seen on removing dents. Congratulations! You’re obviously a thorough professional. It’s craftsmen like you who we wish we had close by! I’d far rather give you the opportunity to repair my car than try myself, or give it to someone I don’t know and trust. Thanks for the video, and best wishes to you and your business.
+Adrian G Thank You! If you ever need dent repair near you, I have contacts with some of the best PDR companies around the country. I can connect you with someone local to you.
@@exceldentremoval Do you know of any in Miami Florida?
@@exceldentremoval how about Olympia
@Cudaman2 Formula and @blakeslide - check out pdrcontractors.com/ for a tech in your area
@@exceldentremoval IM in CT can you give me a name to contact for PDR? Great video by the way
This is high science man, it's an art form - like working with mercury.
You an artist.
Thanks! I appreciate it.
Excellent dent man!!
Have a smaller dent in one door that I hope to get someone like yourself to correct it.
Nice work!!!
Thanks 👍
After watching this extremely well made and informative video, I have come to the conclusion that I do in fact, have a very small piece of lint between by phone screen and screen protector. ... Dang it
😅
😂😂😂
You are a wizard my friend. Incredibly detailed work! Hands down the best I´ve seen
Wow, thanks!
You are a forensic artist. Great work, super patient.
Thank You I appreciate it!
Superb, informative video. I am teaching myself PDR for a hobby and until I watched this video, I was convinced that my struggle, in addition to not knowing how to use the tools, was poor tools. This was a very clearly explained sequence about how to approach a dent and think of metal flow as opposed to simply tool manipulation and choice. This really drove home the need to think about the many facets of a dent and have a proper sequential approach to it's removal. Thank you for sharing your knowledge.
Glad it was helpful!
An artist at work. Love it!
You Sir are a craftsman and a artist !! Phenomenal job !! Subbed!!
Thanks for subscribing!
Mr. Glass. Very rare to see an outcome that perfect on these types of videos. Keep up the good work.
Thanks! 👍
Great work, an excellent point a bought moving the light to enhance the view of the curve in the panel. Great detail.
Thanks!
Excellent, the benchmark of craft !
Great job, privilege to watch, just noticed a small dent in my aluminium door this morning, felt sick. This gives me hope PDR can fix it. Thanks very much for posting.
Thanks for watching! Yes, PDR also works for aluminum dents.
Here is another video where I took out a door dent in an aluminum F-150.
ua-cam.com/video/ZNEyKEF5dOs/v-deo.html
Excel Dent Removal Thanks very much, will keep watching, all the best from Scotland!
Finally I find you, thank you.
The best channel on PDR. Thanks for sharing.
Wow, thanks!
Such patients, thanks for that !
Yes, it can take some practice and a lot of patience to achieve and excellent repair.
Yes great doctor
I didn’t see any patients
I'm impressed that you got the camera angles so well, while also being able to work. Not an easy feat.
That is so true! Until the day that we have a camera in our eyes, it is difficult to see exactly the same thing we do when working on a car and looking into the PDR light.
@@exceldentremoval don't let Elon see that comment he might be coming for you 😂
Balls of steel awesome 💪
Such a pro! Love that video of yours....Keep it coming!
Thank you! Will do!
Greetings from Finland! Very inspirational and motivating video, thank you sir👌🏻
Welcome!
Hi Steven well excellent video thank you.
I bet you did not go short of work after this video! Nice job. Impressive.
I repaired a few dents like this by pulling off the door panels and using my heat gun while I carefully pushed from the inside with a molded half moon auto body tool that I crafted out of old scrap parts. Worked perfectly 👍💯
This is what skill and perfection looks like. This guy is a genius. Shame this isn’t available in Spain..!
On point explanations. Great video!
Thank you for the awesome feedback
That was excellent. Thank you for taking the time.
I appreciate the comment. Thank you!
Another Platt coming in to say ditto! Very awesome video!
Amazing Job. I like that you speak very slow and concise. Well explained. Your the man 👍
I appreciate that!
Great explanation and demonstration!!!
Great video! Have several dents on my Jeep I’ve been considering trying to repair. After watching your video I feel comfortable attempting this on my own. Thank you!
Good luck with repairing your dents! 👍
Did it work?
Honestly the best training videos...
+The Best Video Thanks! Good to know you appreciate the paintless dent repair content.
Subscribing because this guy is a master at what he does and his efforts must not go unnoticed. I recently bought a nice used car. I live in apartments and already i have 2 dents one on the roof from a pinecone i belive (there are pines in my apartments) and the other on the passanger side. It hurts more when you just got it and already its being damaged.
Thanks for subscribing!
Sharp... very sharp! Excellent showcase. 🤙🤙
Thanks! 👍
absolutely brilliant.
Interrsting morecto it than meets the eye
Cheers for your effort
Wow... an artist at work. It just goes to show why you should leave these jobs to the pros.
Great! Sure knows his work. Awesome 👍👍👍
A true craftsman
Quality job! Thanks for making the video, I learned a lot.
Glad it was helpful!
very good instruction.thank you.
Thanks for the feedback!
Very impressive work. I enjoyed watching.
Thank you! I appreciate the response.
You sir are a pro ,at what you do, amazing, awesome job,👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Thank you so much 😀
Excellent explanation and great job Steve!! 👍👍
Appreciate it!! Thank you!
Amazing, works were so detailed.
Thanks a lot!
Very relaxing video to watch.
Man you are a legend!
👊 Appreciate it!
Really well done! Thank you for the Great video,!! will help me greatly with a couple dents in a classic car I am restoring
Glad it helped
WOW! EXCELLENT WORK!!
Thank you so much 😀
Wow, great job ! You Sir are an artist and a Professional 👍👍😎
Thank You!! I appreciate the excellent comment.
awsome video thanks for the tips
Thanks for the compliment on the video.
Just the video I was looking for, thanks mate. The 11 thumbs down make me wonder what sad lives some people live. I bet none of them put out a video.
Thanks! I appreciate the comment.
Far out great work
Wow you did a great job to remove that dent😀
Thanks! 👊
I totally agree with the other comments: You, sir, are a craftsman! Exactly what I was looking for.
Wow, thanks!
Thank you for your kind information, I will share it with my friend.👍
Thanks for sharing
Welcome friend. Thanks.
Hi i have subscribe to your channel for more information.
It requires a load of practice to make that kind of job God bless you.
Yes, you are correct. It looks much easier to do than it is. I've seen many cars that have been damaged worse from inexperienced attempts at repairing their own dents.
Baffles about how flexible these panels actually are. When he was working from the inside it moved so much. Super nice work
How do you actually work with that tool from the inside. I mean normally the glass of the wi does is there in the gap, did you remove some cover of the trim of so?
Often an air wedge is used to create a small gap. Then a window guard is used to cover and protect the glass.
The PDR tools is used by gently pushing and/or twisting motion behind the dent.
Sometimes removing the belt molding, window glass and interior trim is needed.
How come the paint doesn't actually crack with so much hammering going on, is it still flexibal or so?
@@exceldentremoval many thanks for replying! Super fast by the way 😎
Pretty dope video man good job.
Appreciate it!
God I wish he was here in my city! Great work.
Thank You!! While I don't have a location near you. You should be able to find a great PDR company to help with your dents. I'd just suggest checking their online reviews and before and after examples to see the quality of their work.
perfect job!👍
Thank you!!
Beautiful job 👍
Thank You!
Impressive. Thanks.
Thank You!!
very impressive, liked and subbed
Thanks for the sub!
Super. Thnaks.
Very informational, Thank you very much
*informative too ;-)
Glad it was helpful!
Awesome! Thank you!
You bet!
FLAWLESS 👍🏻
+Pete Escalona Thanks!!
Amazing job, where can I bring my car in NJ? I want top quality work like the one you made here.
There are a few great places near you. Just check out their reviews and before and after photos to check the quality of their work.
Great video
+black soul Thanks for watching!!
Great video and great work! My Audi A4 has a small dent towards the bottom of the door along the angle of the metal. The rest of the car is perfect and every time I wash and polish it and take a step back that dent always pisses me off. Need to find someone with your skill to fix it properly!
That’s always the worst. Having to keep seeing the dent. Especially after just getting all cleaned up.
There should be a good local PDR company near you. Just be sure they are highly rated and have great reviews for their work. Not all PDR techs quality is the same. You’ll want to be happy with the results you are paying for.
Should be called Dent Removal Masterclass 😂🙏👏
THANKS!! I appreciate that.
Well done.
👍 Thanks!
Great job
Thanks! I appreciate it.
Wonderful job BTW!!!!
Thank you!
i'm convinced that I won't be able to fix any of my door dents now
LOL..thats exactly what i said before scrolling down!
lmao same
put putty on it
This is an excellent educational piece. I’ve also learned this is very much an art and I’m probably better off hiring a pro like yourself rather than taking on my own dents. Cheers!
Glad it was helpful!
Genial you speak about how push and exactly where(arrows). I start your fan☺
Awesome, thank you!
Just subbed. I have askinny line dent 11in long on back passenger door. How would I fix it
Excelente!
I agree the hot glue pulling dents doesn't always work and the high ridges need to be lowered as well to fix the dent properly. You have patience and fixed that dent perfectly. I need to use that same technique but need to locate some tools to work the dents out. Flat tools to fit between supports and the skin of the door. Thanks for the video.
Thank! I appreciate the compliment on the repair. 👍
I like how you explained the action and why you did the removal the way you did. Good explanation of your planning and dent removal skill. I am a new subscriber to your site and would like to know how you handle thicker gauge metal when it comes to dent removal. I have a 97 Ram 2500 and it bears witness to my driving skills 🙄. I have a couple of medium dents 10”x6” that are pushed in about 1/4” and no paint damage. I would like to take shot at PDR, but one of the PDR guys didn’t want to tackle it because of the metal gauge. What do you think about working the heavier gauge metals…..thanks
I’ve repaired many types of cars from probably every decade from the ‘30s till now with paintless dent repair.
While the older cars with thicker metal are tougher, they still can be done.
But if you have some larger dents in the truck, then it may be more than it being thicker metal that they are unable to repair.
Brilliant.
Thanks!
Wish you could show us how your using the tools behind the door skin. Great video, Thanks!
This video will show what it looks like behind the panel ➡️ ua-cam.com/video/8_rHhNLtMZA/v-deo.html
That's insane😱😱😱
Wonderful
Познавательные видео. Спасибо.
Your Welcome! Пожалуйста!