I always stay awake at one o clock in the morning to watch your newest videos. You inspired me to repair iphones and some Ipads. Thank you for everything.
Hupe if you like this video you may like my new series where I restore 12 Apple devices and try to make a profit , part one is here : ua-cam.com/video/wpLYmpm5L2Y/v-deo.html
the donor housing looks more like an iPad Mini 2. Is that the housing you used? because the original housing was Slate Black like the iPhone 5, and the new one looks like a Space Grey.
I tried this repair on a mini 3 and it kicked my but. I am new at cell repairs and tried to use a soldering iron and wick for de soldering. I did not know about the heat gun method. Of course, I ended up ruining the logic board and two replacement charge port assemblies. 😌
@@Edvinas_channel that works too, but it'd be interesting to build a checkm8 payload injector directly into the ipad mini itself since there's plenty of internal space
Micky R I’ve got iPhone 4s, 6s plus, iPad mini, 2,3 and 5 lying around because they’re too old and slow now. Well, the 6s plus is still ok but I have xr and Xs plus now so it’s surplus.
For an easier removal of the Charger port put leaded solder on the gold contact points then remove the charger port with heat. The leaded solder will decrease the temperature needed to melt the solder off
Wow Hugh, I was wondering if it was gonna start ghosting while you were working on it I always have problems with the mini no matter how good you clean the adhesive some contact starts to eventually make digitizer go haywire
Thanks for the tips master, I need it as I broke my step dad's iphone 5 and he's not happy. I thought I could do it but clearly not. And for that reason I watch your videos. Your one to learn from you have a gift.
Screen Savers I'm typing this on an mini 1 on iOS 9.3.5 it is slow I purchased it a few weeks ago due to lockdown it's actually quite usable if you don't fill it with apps
you could just jailbreak it and install coolbooter. you can go as far down as ios 5 i think depending on the device and it really helps speed things up
Sna na na I'm using my iPad mini original since a day after its release, I was just thinking about how much it would cost today and was just hoping u would make a video on this and u did six minutes ago, what the actual frock omg
Ipad rehab and Louis Rossman are great channels to watch for micro soldering I'm sure this has been commented before by people (probably also by me) but I just wanted to let everyone know again
I had the same exact issue with my iPad mini 1st gen after installing iOS 9. Apps would crash constantly and would never actually run in the background, it would always reset when I double-click the home button and go back to it.
I'm commenting on an iPad mini 1 I have had since 2014 one volume button doesn't work orientation lock toggles randomly and the touch screen doesn't work for a few seconds after restarting
I picked up an iPad mini 1 locally and was able to get the digitizer and LCD replaced. However it was botched when I realized that the digitizer was spotty........
My iPad Air 2 used to turn on and touch didn’t work but now it does not charge and while I try to charge it the screen blinks with very dim light all over the screen. Can you tell me what’s wrong with it so I can fix it?
thank you so much hugh you inspired me to fix phones i bought broken iphone 6 64 gb at ebay for 50 usd and fixed it and sold it again on ebay for 300 usd
you can actually downgrade an ipad mini one to ios 8.4.1 by jailbreaking it installing ifile and then changing the version to ios 6.1.3 so that the ipad thinks it needs to update to ios 8.4.1. Once you've updated to ios 8.4.1 you need to reset it in settings and then you just set it up
I just bought a lot of phones and a iPad mini and Apple remote for £29 :) looking forward to fixing them. Hopefully it’s easier than this. Also just bought one of those battery boards.. the Kaisi ones. If anyone has some experience with them let me know lol I’m new to battery revivals
What should happen if the touchscreen doesn’t work properly? I have experienced this several times trying to get my iPad Mini screen to stay on the tablet, but now nothing works right.
I have a iPad mini 2 that needs to be unlocked, the problem is that iTunes won’t update making it impossible for me to try to connect the device to a modern computer. Any ideas on how to fix this?
I fixed my iPad mini first generation as well and I was surprised how unbelievably stupid it was glued together… it really isn’t Apple like to use adhesive to glue down the logic board or to solder the lightning port onto the device… I’m glad that it isn’t shattered and bent anymore and is functioning almost normally but the heat ruined the Digitizer of the iCloud locked iPad wich had the replacement Digitizer installed… I hope the newer iPads aren’t made that stupidly…
It’s crazy to think that you are probably doing more for the environment than Apple is. Highly respect what you do man! Keep up the great work!
Not to knock on him but it doesn't seem too hard to do more for the environment than Apple.
@@Havok0159 even throwing stuff into the trash does more
No kidding. Apple is so ridiculous, money talks
Another awesome vid Hugh!
i did my first iphone fix by using your videos and tips and im 9
it was a iphone 6s
@@shakyamadanayake what you are 9 years old ? WTF
@@shakyamadanayake thats awsome
@@GuiiasUnited your very cool because you play roblox send me a friend request my name is PigBloxCreator
Hugh jeffreys: It was an easy fix.
Apple: wait! That's illegal!
yes 😂
ReVeRsE cArd
*apple left the chat*
Cheap is also a forbidden word
It’s right there in Wikipedia
*dramatic intro sounds-*
"Hi guys welcome to another Hugh Jeffreys Video!"
People like these are literally saving a lot of electronics from getting converted into e-waste. The earth is grateful to you.
Hugh, i started repairing iPhones because of you :)
Thats awesome
Cool
Wow All the best Brother...
Same I replaced the cracked and broken lcd on my gold iPhone 6 and got some old pictures and a almost new phone back!
I tried to replace my cracked lcd and i cracked all part of the iphone 😃
I always stay awake at one o clock in the morning to watch your newest videos. You inspired me to repair iphones and some Ipads. Thank you for everything.
Same here. But with computers it was Austin Evans.
100k subs with no videos challenge nobody asked u crockpot
Mark Nobody asked you to reply you low iq kindergartener.
Bought a refurbished one for about 180€ and I’m not disappointed. Quite happy actually.
Love your videos Sir!
I was literally rewatching your restoration videos and then I got a notification about this one:)
Hupe if you like this video you may like my new series where I restore 12 Apple devices and try to make a profit , part one is here : ua-cam.com/video/wpLYmpm5L2Y/v-deo.html
@@domchapp bruh
Well done Hugh. Another brilliant repair and can’t wait to see your iPhone X restoration
the donor housing looks more like an iPad Mini 2. Is that the housing you used? because the original housing was Slate Black like the iPhone 5, and the new one looks like a Space Grey.
Keep doing what you're doing. You're so inspirational and I love watching your videos every Sunday afternoon.
I tried this repair on a mini 3 and it kicked my but. I am new at cell repairs and tried to use a soldering iron and wick for de soldering. I did not know about the heat gun method. Of course, I ended up ruining the logic board and two replacement charge port assemblies. 😌
Hugh, the iPad might be downgradable but tethered, I’m im correct the checkm8 exploit should work in that iPad
Phoenix jb + coolbooter can downgrade it with ease (although it's semi-untethered), though it will consume disk space.
Edvinas I honestly forgot about that lol
@@Edvinas_channel that works too, but it'd be interesting to build a checkm8 payload injector directly into the ipad mini itself since there's plenty of internal space
You're simply amazing mate, I love that you bring tech back to life from the tech grave.
Been waiting for this mate.
Fixed my SE with this guys motivation
Tai Callender I like the SE brcause its my only phone and how small it is
@@forcequitOS Wait for the SE 2 then
@@forcequitOS It is a 2016 phone btw... but anyways, if you can't wait any longer you can get the iPhone 11, 11 Pro or the 11 Pro Max
@@forcequitOS Maybe if you want a currently Apple "supported" iPhone get the XR but if you want to get the dual camera get the X or XS
I saw today an online article about your repairs here, in a mexican website. Crazy how you’re slowly taking over the world. Great work sir 👌
check c8119 or c8120 for short to ground, most of the time 3v3 line shorted. inject 3.3 volt to c8120 and look for a hot component probably pmic.
If only it could’ve been slate:(
Good Job Hugh!
I have a Slate 16GB Mini 1 just sitting around. It still works 😀
MJ 5 me too
MJ 5 who has one laying around 😂 am I just like too broke to not let an Apple product sit around
juju's world Me, because I upgraded.
Micky R I’ve got iPhone 4s, 6s plus, iPad mini, 2,3 and 5 lying around because they’re too old and slow now. Well, the 6s plus is still ok but I have xr and Xs plus now so it’s surplus.
just a suggestion what u can use is b7000 glue its a great adhesive glue in liquid form and is better than the tape
hello i have an ipad mini 1. is it possible to solder anything onto this (like memory), to enable an upgrade beyond iOS 9.3.5?
Great repair Hugh, like for 50 years goodluck : )
Keep Fixing Them mistreated devices. I enjoy watching them.
Little tip when you want to wick the soldering apply new leaded solder and wick it then
does this unlock activation lock too
Put a wedge tip on the iron. Use tinning paste to prep the tip for use. The needle tips they put in with new irons are usually crap
use some low melt solder to get the old connector off a lot easier. Stops you from also dumping to much heat onto the board.
for faster speeds, i recommend downgrading to 8.4.1, as the OTA is still signed.
Hi Hugh! I love you're videos so much, they are so inspiring ♥️
HEY HUGHHH
I think the iPad mini one can go up to iOS 9.3.6. Because Apple released an iOS 9 update as well as an iOS 10 update.
Wowee great job on the soldering! Killed it
Hotel? Trivago.
iPad repair?
*Hugh Jeffreys*
for whatever unknown reason I thought u were going to say Hugh I go
Trivago, um dos melhores memes do Brasil
@@christionwalker874 lol
spooked koneko こねこはこちら or iphone too
Can you solder a better chipset?
Hugh’s videos are just asmr too good tbh
i want a ipad so so extremly much and this video proves that everything is fixeble and i love what your doing so keep doing what your doing much love
4:50 just goot flex ur money i see u
He can buy a whole pack of ramen
mate I have a iPad Mini but the Charging Port is broken.. hopefully I can get it fix soon since I have the most memorable time with it!
I have This Ipad mini 1 its screen is chracked Do I need reprair?
For an easier removal of the Charger port put leaded solder on the gold contact points then remove the charger port with heat. The leaded solder will decrease the temperature needed to melt the solder off
still have one and works just fine. usually write on it and each videos
Wow Hugh, I was wondering if it was gonna start ghosting while you were working on it I always have problems with the mini no matter how good you clean the adhesive some contact starts to eventually make digitizer go haywire
Thanks for the tips master, I need it as I broke my step dad's iphone 5 and he's not happy. I thought I could do it but clearly not. And for that reason I watch your videos. Your one to learn from you have a gift.
Great work. I just worked on one of these today. Really unfortunate that iOS 9 runs so poorly on A5 devices. Almost unuseable.
Screen Savers I'm typing this on an mini 1 on iOS 9.3.5 it is slow I purchased it a few weeks ago due to lockdown it's actually quite usable if you don't fill it with apps
you could just jailbreak it and install coolbooter. you can go as far down as ios 5 i think depending on the device and it really helps speed things up
Sna na na I'm using my iPad mini original since a day after its release, I was just thinking about how much it would cost today and was just hoping u would make a video on this and u did six minutes ago, what the actual frock omg
you could see that double tape which is used for sticking screen / digitizer
You’re a pro in this hugh.
Nice video and congrats on graduating!
9:04 did he just used the ipad mini 2 housing to replace the old one?
This guy should have 1000 million subs
Hey jeffrey please make a video on how do you select the mixed lot/damaged phones from ebay
Thanks, Hugh after watching your vids I can now troubleshoot and fix a problem with my iPads :)
Чувак, ты просто крут! после видео с макбуком не мог не смотреть дальше!!!
hugh i am probs ur youngest fan i fix my old laptops because of u so keep up thegood work
I’ve been waiting for this video.
Idk why but i love watching your repair vids and restorations
Ipad rehab and Louis Rossman are great channels to watch for micro soldering
I'm sure this has been commented before by people (probably also by me) but I just wanted to let everyone know again
Do you know where can I get a replacement LCD+digitizer+home button for a 1st gen iPad Mini for pretty cheap?
Hugh do you have iPad 4th generation?
I had the same exact issue with my iPad mini 1st gen after installing iOS 9. Apps would crash constantly and would never actually run in the background, it would always reset when I double-click the home button and go back to it.
Funny thing I found an identical one in a dumpster
I love your video.. Full of detail and clear explanation.. Love from malaysia
How to fixed error 2009 in iPhone 6 please sir reply
Just Google it
@@maxz8807 is Google doesn't reaply me that's why
I-Pad, you repaired him very good, perhaps I am gonna buy one, thanks for showing and kind regards
I had a ipad mini 1st gen until it got snapped in half (literally in half)
albion pajaziti holy crap
I'm commenting on an iPad mini 1 I have had since 2014 one volume button doesn't work orientation lock toggles randomly and the touch screen doesn't work for a few seconds after restarting
I love these repair videos, where did you learn to do this? Any good starting reference materials?
Hobby
I picked up an iPad mini 1 locally and was able to get the digitizer and LCD replaced. However it was botched when I realized that the digitizer was spotty........
would love to see how many devices are on his icloud
I got a mini 1 fully working on 30$ but it has a little crack
Another great video 👏🏼
You can dual boot if you wanna go on iOS 6 or 7
Does using old ipad mini still do its job for every day usage?
My iPad Air 2 used to turn on and touch didn’t work but now it does not charge and while I try to charge it the screen blinks with very dim light all over the screen.
Can you tell me what’s wrong with it so I can fix it?
thank you so much hugh you inspired me to fix phones i bought broken iphone 6 64 gb at ebay for 50 usd and fixed it and sold it again on ebay for 300 usd
I made profit :D
you can actually downgrade an ipad mini one to ios 8.4.1 by jailbreaking it installing ifile and then changing the version to ios 6.1.3 so that the ipad thinks it needs to update to ios 8.4.1. Once you've updated to ios 8.4.1 you need to reset it in settings and then you just set it up
Can you fix my ipod touch??
Hugh theres a mini electronic tork screw driver out there look up 12vilts he is acanadian electrinic engineer he demos this schrew driver
I just bought a lot of phones and a iPad mini and Apple remote for £29 :) looking forward to fixing them. Hopefully it’s easier than this. Also just bought one of those battery boards.. the Kaisi ones. If anyone has some experience with them let me know lol I’m new to battery revivals
What are the coin thingy and what's the usage of it
What should happen if the touchscreen doesn’t work properly? I have experienced this several times trying to get my iPad Mini screen to stay on the tablet, but now nothing works right.
I cant wait for your video about new JC home button..
Or other Iphone 7/8 home button like BFX Home Button
Could you link the adhesive you used for the screen? I'm going to be doing a screen and housing replacement the same type of iPad, thanks
Love when you repair iPads! Awesome as always ♥️
Shut up u crockpot
Mark toxic
I love your videos Hugh you inspired to take up iPhone repairs thank you👍 I’ve repaired five iPhones now
What do you do with all the phones you restore?
I have the same ipad but it lcd and digitiser both are broken . How much would it cost to repai
Nice video Hugh 👍🏻👊🏻
I still use this iPad to this day i honestly need an upgrade suggestions?
Dud can you please the list of suppliers I wanted to start my own repair bizz
Where do you sell the things you repair?
I’m sad that the slate coloring is gone, but I can’t even solder.
Great work btw
I want to get a new battery for my phone but I live in the US, what are good brands?
no adhesive on the top or bottom!?
I have a iPad mini 2 that needs to be unlocked, the problem is that iTunes won’t update making it impossible for me to try to connect the device to a modern computer. Any ideas on how to fix this?
In removing the motherboard, rather than heat and pry it, d/c the battery, and flood under the board with isopropyl.
Where did u source that iPad mini parts
What are you doing with all your refurbished items ?
I fixed my iPad mini first generation as well and I was surprised how unbelievably stupid it was glued together… it really isn’t Apple like to use adhesive to glue down the logic board or to solder the lightning port onto the device… I’m glad that it isn’t shattered and bent anymore and is functioning almost normally but the heat ruined the Digitizer of the iCloud locked iPad wich had the replacement Digitizer installed… I hope the newer iPads aren’t made that stupidly…
I would recommend getting some Tessa tape, I use those for repairing iPads at work and I love it.