I have the same codes on my car it’s been a while I haven’t changed my oil for real thank you for the tip I will definitely change my oil and see what happens🇯🇲big up
Also make sure when you fuel up, you're using premium gas and see if your gas fuel light in on. Lastly, this could be an indication of a loose gas cap or issue with the gas fuel area/pump.
My shade cream mechanic told me I needed to replace the catalytic converter but it’s not making any great noisy sounds or anything so I didn’t necessarily read with that assessment of the guys is pretty good in every other way so I am going to try this oil change and see what happens
I had the same issue on Outback 2.5 y.2007 with 293k km. I changed air filter, checked air mass flow sensor and cleaned throttle body. After that, I did not see this check engine light again.
Thank you for your video I’m having the same issue same lights on a 2010 Subaru Forrester you buy a Subaru because they’re supposed to be better not worst I had Subarus legacies before and you never get stuck with them no matter how deep the snow, but this one with all the gadgets and all the garbage traction control and trash is designed to eat your Money lol I’m going to try changing the oil filter and oil it’s about do see if that fixes the problem I had this before and he went away by himself but this time is been on for a longer time
Anytime my 2009 Subaru's Check Engine Light comes on, it always sets off the traction control and cruise control. That is normal, and plus I have had it happen when the gas cap was loose. The next day of driving, it reset once I got the gas cap screwed back on more. Nowadays, I do not go anywhere after refueling and clicking the cap 3-4 times and it never happened since.
Guess what my friend I charge my oil and I don’t even move the car not even a test drive can’t believe just oil and filter clears the p0175 and p0172 codes🇯🇲😮
i think the oil change was a coincidence. With P0172 first step should be to clean the MAF sensor. Second Step Clean the throttle Body. Third throw a new air filter in. 4th step. Do idle relearn. This should do the trick.
Changing oil was coincidental. The issue comes and goes on it’s own in my 05 Forester is doing this. The issue especially is it’s like the gas pedal is disconnected and it’s only letting me limp off the road with no rpm response to the pedal. The check engine light is on with cruise control flashing. I pulled off the road and turned the ignition on and off 5 times and it made it have power from the pedal again and would drive fine but cruise control is flashing and the check engine light is on. I lose power until I turn it off and on again a few times. This happened 3 times lately. I got home the first time with the lights on after finagling got power back and the next day it was normal again no lights flashing or on. Then it started flashing randomly with no warning and wouldn’t give any power again. Again I pulled off limping and did the ignition switch again and got power back but still have flashing cruise control and steady check engine. Then I tried turning the ignition off and on 10 times and the lights reset and were off again and it drove normal for 4 days and tonight it started flashing again and had to limp again and got power back and got home with the check engine light on and cruise control flashing. I couldn’t check the code because when I got the computer there wasn’t a check engine light on and it read no faults!🤦🏻♂️ Please help me I have extensive Emphysema and COPD and I can’t walk at all without having a heart attack! 😢 I know how to work on it I can do most jobs I just have basic tools though ❤😌🖖🏼🇺🇸
mine is a cobb tuned 2010 forester xt. today the check engine, traction control, cruise control, and AT oil temp lights all came on and car was shaking/shuddering when idling, as well as driving in city traffic. with the way it was driving i was fearful of even driving it across the lot to the service center at Canadian Tire. Just bought this car used a couple months ago. it's in the shop right now will be looked at tomorrow but I'm worried and curious if anybody knows what the cause/solution is?
Hi Rachel, just the P0172 check engine light code by itself can be caused by multiple things. This issue is open to multiple causes. Some people have said that it has worked for them and unfortunately did not work for others. I do believe it is worth a try.
Subaru Forester 2011 Check engin, cruise and traction light on : I changed my 2 oxygen sensor myself and lights went off. Was doing 375 km per tank, now 550+ km. Cost : 166$ canadian Changing gas cap did no good
@meestadeuce mine is a cobb tuned 2010 forester xt. today the check engine, traction control, cruise control, and AT oil temp lights all came on and car was shaking/shuddering when idling, as well as driving in city traffic. with the way it was driving i was fearful of even driving it across the lot to the service center at Canadian Tire. Just bought this car used a couple months ago. it's in the shop right now will be looked at tomorrow but I'm worried and curious if anybody knows what the cause/solution is?
I have the same codes on my car it’s been a while I haven’t changed my oil for real thank you for the tip I will definitely change my oil and see what happens🇯🇲big up
Also make sure when you fuel up, you're using premium gas and see if your gas fuel light in on. Lastly, this could be an indication of a loose gas cap or issue with the gas fuel area/pump.
thanks man
Thank you sir for saving me money, I just changed my oil and no more lights
You're welcome, glad to help. Thank you so much for watching
My shade cream mechanic told me I needed to replace the catalytic converter but it’s not making any great noisy sounds or anything so I didn’t necessarily read with that assessment of the guys is pretty good in every other way so I am going to try this oil change and see what happens
I will try the oil change. It's been a bit since oil change and i haven't driven the car much either.
I had the same issue on Outback 2.5 y.2007 with 293k km. I changed air filter, checked air mass flow sensor and cleaned throttle body. After that, I did not see this check engine light again.
Thank you for the info
You're welcome! I'm glad it helped
I got the engine oil changed on a Forester 2010 and a week later all these 3 signals appeared. Any idea why?
Thank you for your video I’m having the same issue same lights on a 2010 Subaru Forrester you buy a Subaru because they’re supposed to be better not worst I had Subarus legacies before and you never get stuck with them no matter how deep the snow, but this one with all the gadgets and all the garbage traction control and trash is designed to eat your Money lol
I’m going to try changing the oil filter and oil it’s about do see if that fixes the problem I had this before and he went away by himself but this time is been on for a longer time
Please help! Did anything change? I have changed the gas cap, tighten it up every time the lights pop up 🥴🥴 today the lights came back on again 😩😩
Anytime my 2009 Subaru's Check Engine Light comes on, it always sets off the traction control and cruise control. That is normal, and plus I have had it happen when the gas cap was loose. The next day of driving, it reset once I got the gas cap screwed back on more. Nowadays, I do not go anywhere after refueling and clicking the cap 3-4 times and it never happened since.
Seems subaru's all have this issue.my 09 forrester just did the same thing.
Will the cars AWD still function woth these cation lights on.
My 2013 subaru crosstrek has these 3 lights on. And when I go to accelerate after a stop. It feels like my tires are sliding on the road.
Mine happened today with the same 3 lights on my forester XT..... what should I do??
Dude you really just saved me hours of stress
That is really great to hear!
Guess what my friend I charge my oil and I don’t even move the car not even a test drive can’t believe just oil and filter clears the p0175 and p0172 codes🇯🇲😮
i think the oil change was a coincidence. With P0172 first step should be to clean the MAF sensor. Second Step Clean the throttle Body. Third throw a new air filter in. 4th step. Do idle relearn. This should do the trick.
It’s the speed sensor on your wheels
Changing oil was coincidental. The issue comes and goes on it’s own in my 05 Forester is doing this. The issue especially is it’s like the gas pedal is disconnected and it’s only letting me limp off the road with no rpm response to the pedal. The check engine light is on with cruise control flashing. I pulled off the road and turned the ignition on and off 5 times and it made it have power from the pedal again and would drive fine but cruise control is flashing and the check engine light is on. I lose power until I turn it off and on again a few times. This happened 3 times lately. I got home the first time with the lights on after finagling got power back and the next day it was normal again no lights flashing or on. Then it started flashing randomly with no warning and wouldn’t give any power again. Again I pulled off limping and did the ignition switch again and got power back but still have flashing cruise control and steady check engine. Then I tried turning the ignition off and on 10 times and the lights reset and were off again and it drove normal for 4 days and tonight it started flashing again and had to limp again and got power back and got home with the check engine light on and cruise control flashing. I couldn’t check the code because when I got the computer there wasn’t a check engine light on and it read no faults!🤦🏻♂️ Please help me I have extensive Emphysema and COPD and I can’t walk at all without having a heart attack! 😢
I know how to work on it I can do most jobs I just have basic tools though ❤😌🖖🏼🇺🇸
I have same issue 😢
Привіт як зробили тачку
Oil change? Was it low? Strange
After oil change
Check engine popped
Abs light, alt temp oil light, cruise control flashing, traction control
Hi Phil, how did you solve this? Just happened yesterday and had to abort a trip.
Mine actually came on AFTER a oil change any ideas?
@@SP-gp5pb Air filter wasn't completely seated
mine is a cobb tuned 2010 forester xt. today the check engine, traction control, cruise control, and AT oil temp lights all came on and car was shaking/shuddering when idling, as well as driving in city traffic. with the way it was driving i was fearful of even driving it across the lot to the service center at Canadian Tire. Just bought this car used a couple months ago. it's in the shop right now will be looked at tomorrow but I'm worried and curious if anybody knows what the cause/solution is?
I just had the same problem right now, what was the cause ? I’m curious and kinda stressed lol just bought it :/
Would this work for an '09?
Hi Rachel, just the P0172 check engine light code by itself can be caused by multiple things. This issue is open to multiple causes. Some people have said that it has worked for them and unfortunately did not work for others. I do believe it is worth a try.
What scanner did you used?
I use a Launch 8011 scanner. Thanks for watching!
Just do a oil change and air filter n fixed
Subaru Forester 2011
Check engin, cruise and traction light on :
I changed my 2 oxygen sensor myself and lights went off.
Was doing 375 km per tank, now 550+ km.
Cost : 166$ canadian
Changing gas cap did no good
Prior to changing O2 sensors, was your car jerky or would it stutter when accelerating or driving slowly like in city traffic?
@meestadeuce mine is a cobb tuned 2010 forester xt. today the check engine, traction control, cruise control, and AT oil temp lights all came on and car was shaking/shuddering when idling, as well as driving in city traffic. with the way it was driving i was fearful of even driving it across the lot to the service center at Canadian Tire. Just bought this car used a couple months ago. it's in the shop right now will be looked at tomorrow but I'm worried and curious if anybody knows what the cause/solution is?
And I'm sucking up a lot of fuel
Як вирішили проблему теж жре
Привіт як зробив тачку що було
Привіт що маеш на увазі перенавчання бездіяльне